add templates

git-svn-id: https://svn.disconnected-by-peer.at/svn/linamh/trunk/mds@707 6952d904-891a-0410-993b-d76249ca496b

header.txt

@@ -0,0 +1,4 @@
+# Copyright 1999-2009 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+

skel.ChangeLog

@@ -0,0 +1,67 @@
+# ChangeLog for <CATEGORY>/<PACKAGE_NAME>
+# Copyright 1999-2009 Gentoo Foundation; Distributed under the GPL v2
+# $Header: $
+
+*<PACKAGE_NAME>-<PACKAGE_VERSION>-<PACKAGE_RELEASE> (DD MMM YYYY)
+
+  DD MMM YYYY; YOUR_NAME <YOUR_EMAIL> changed_file1, changed_file2 :
+  Initial import.  Ebuild submitted by submitter_name <submitter_email>.
+  Note that the "changed_file" listing is optional if you are simply bumping
+  the rev of the ebuild and are only making changes to the .ebuild file
+  itself.  Also note that we now have a single unified paragraph rather than
+  having the first line separated from the rest by a newline.  Everything
+  should be in one block like this. (note by drobbins, 16 Jul 2002)
+
+  DD MMM YYYY; YOUR_NAME <YOUR_EMAIL> changed_file1, changed_file2: this is
+  an earlier ChangeLog entry.
+
+-- Explanation of ChangeLog format:
+
+  ***************************************************************************
+  THIS IS IMPORTANT: The ChangeLog format is a *chronological* account of all
+  changes made to a set of ebuilds. That means that the most recent ChangeLog
+  entry *always* goes at the top of the file. More explanation below.
+  ***************************************************************************
+
+  ***************************************************************************
+  ANOTHER IMPORTANT NOTE: There are some ChangeLogs that don't follow this
+  format and organize all changes under the "correct" "*" entry. This is not
+  correct. However, rather than making a concerted effort to fix these
+  ChangeLogs, we should spend our energy defining a comprehensive and strict
+  XML-based ChangeLog format which we then migrate to. But for any entries to
+  any ChangeLog that *you* make, please make sure to always add entries to the
+  top of the file like a good boy/girl. Even do this if it's clear that you're
+  adding an entry to a b0rked ChangeLog.
+  ***************************************************************************
+
+  This changelog is targeted to users. This means that the comments should be
+  well explained and written in clean English.
+
+  Every new version or revision of the package should be marked by a '*'
+  separator line as above to indicate where in the chronology it was first
+  added to our CVS tree. Any changes since the last revision, really _any
+  changes at all_ have to be added to the top of the file, underneath the
+  initial copyright and cvs header comments, in exactly the same format as this
+  comment. If you are modifying older ebuilds, simply note them as changed
+  files and add your entry to the top of the ChangeLog. Resist the temptation
+  to "organize" your ChangeLog entries by placing them under the "correct" "*"
+  entries -- this isn't the purpose of the "*" entries.
+
+  This means that you start with header line that has the following format,
+  indented two spaces:
+
+  DD MMM YYYY; your_name <your_email> changed_file1, changed_file2: Your
+  explanation should follow. It should be indented and wrapped at a line width
+  of 80 characters.  The changed_files can be omitted if they are obvious; for
+  example, if you are only modifying the .ebuild file and committing a new rev
+  of a package.  Any details about what exactly changed in the code should be
+  added as a message when the changes are committed to cvs, not in this file.
+
+-- A word regarding credit:
+
+  Please add credit information ("ebuild submitted by ...", "patch submitted
+  by ...") to the ChangeLog. Do not add this information to the ebuilds
+  themselves.
+
+  And remember: Give credit where credit is due. We're all doing this for
+  free, so the best we can hope (and expect!) to receive is credit.

skel.ebuild

@@ -0,0 +1,169 @@
+# Copyright 1999-2009 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+# NOTE: The comments in this file are for instruction and documentation.
+# They're not meant to appear with your final, production ebuild.  Please
+# remember to remove them before submitting or committing your ebuild.  That
+# doesn't mean you can't add your own comments though.
+
+# The 'Header' on the third line should just be left alone.  When your ebuild
+# will be committed to cvs, the details on that line will be automatically
+# generated to contain the correct data.
+
+# The EAPI variable tells the ebuild format in use.
+# Defaults to 0 if not specified. The current PMS draft contains details on
+# a proposed EAPI=0 definition but is not finalized yet.
+# Eclasses will test for this variable if they need to use EAPI > 0 features.
+# Ebuilds should not define EAPI > 0 unless they absolutely need to use
+# features added in that version.
+#EAPI=0
+
+# inherit lists eclasses to inherit functions from. Almost all ebuilds should
+# inherit eutils, as a large amount of important functionality has been
+# moved there. For example, the $(get_libdir) mentioned below wont work
+# without the following line:
+inherit eutils
+# A well-used example of an eclass function that needs eutils is epatch. If
+# your source needs patches applied, it's suggested to put your patch in the
+# 'files' directory and use:
+#
+#   epatch ${FILESDIR}/patch-name-here
+#
+# eclasses tend to list descriptions of how to use their functions properly.
+# take a look at /usr/portage/eclasses/ for more examples.
+
+# Short one-line description of this package.
+DESCRIPTION="This is a sample skeleton ebuild file"
+
+# Homepage, not used by Portage directly but handy for developer reference
+HOMEPAGE="http://foo.bar.com/"
+
+# Point to any required sources; these will be automatically downloaded by
+# Portage.
+SRC_URI="ftp://foo.bar.com/${P}.tar.gz"
+
+# License of the package.  This must match the name of file(s) in
+# /usr/portage/licenses/.  For complex license combination see the developer
+# docs on gentoo.org for details.
+LICENSE=""
+
+# The SLOT variable is used to tell Portage if it's OK to keep multiple
+# versions of the same package installed at the same time.  For example,
+# if we have a libfoo-1.2.2 and libfoo-1.3.2 (which is not compatible
+# with 1.2.2), it would be optimal to instruct Portage to not remove
+# libfoo-1.2.2 if we decide to upgrade to libfoo-1.3.2.  To do this,
+# we specify SLOT="1.2" in libfoo-1.2.2 and SLOT="1.3" in libfoo-1.3.2.
+# emerge clean understands SLOTs, and will keep the most recent version
+# of each SLOT and remove everything else.
+# Note that normal applications should use SLOT="0" if possible, since
+# there should only be exactly one version installed at a time.
+# DO NOT USE SLOT=""! This tells Portage to disable SLOTs for this package.
+SLOT="0"
+
+# Using KEYWORDS, we can record masking information *inside* an ebuild
+# instead of relying on an external package.mask file.  Right now, you should
+# set the KEYWORDS variable for every ebuild so that it contains the names of
+# all the architectures with which the ebuild works.  All of the official
+# architectures can be found in the keywords.desc file which is in
+# /usr/portage/profiles/.  Usually you should just set this to "~x86".  The ~
+# in front of the architecture indicates that the package is new and should be
+# considered unstable until testing proves its stability.  So, if you've
+# confirmed that your ebuild works on x86 and ppc, you'd specify:
+# KEYWORDS="~x86 ~ppc"
+# Once packages go stable, the ~ prefix is removed.
+# For binary packages, use -* and then list the archs the bin package
+# exists for.  If the package was for an x86 binary package, then
+# KEYWORDS would be set like this: KEYWORDS="-* x86"
+# DO NOT USE KEYWORDS="*".  This is deprecated and only for backward
+# compatibility reasons.
+KEYWORDS="~x86"
+
+# Comprehensive list of any and all USE flags leveraged in the ebuild,
+# with the exception of any ARCH specific flags, i.e. "ppc", "sparc",
+# "x86" and "alpha".  This is a required variable.  If the ebuild doesn't
+# use any USE flags, set to "".
+IUSE="gnome X"
+
+# A space delimited list of portage features to restrict. man 5 ebuild
+# for details.  Usually not needed.
+#RESTRICT="strip"
+
+# Build-time dependencies, such as
+#    ssl? ( >=dev-libs/openssl-0.9.6b )
+#    >=dev-lang/perl-5.6.1-r1
+# It is advisable to use the >= syntax show above, to reflect what you
+# had installed on your system when you tested the package.  Then
+# other users hopefully won't be caught without the right version of
+# a dependency.
+DEPEND=""
+
+# Run-time dependencies. Must be defined to whatever this depends on to run.
+# The below is valid if the same run-time depends are required to compile.
+RDEPEND="${DEPEND}"
+
+# Source directory; the dir where the sources can be found (automatically
+# unpacked) inside ${WORKDIR}.  The default value for S is ${WORKDIR}/${P}
+# If you don't need to change it, leave the S= line out of the ebuild
+# to keep it tidy.
+#S="${WORKDIR}/${P}"
+
+src_compile() {
+	# Most open-source packages use GNU autoconf for configuration.
+	# The quickest (and preferred) way of running configure is:
+	econf || die "econf failed"
+	#
+	# You could use something similar to the following lines to
+	# configure your package before compilation.  The "|| die" portion
+	# at the end will stop the build process if the command fails.
+	# You should use this at the end of critical commands in the build
+	# process.  (Hint: Most commands are critical, that is, the build
+	# process should abort if they aren't successful.)
+	#./configure \
+	#	--host=${CHOST} \
+	#	--prefix=/usr \
+	#	--infodir=/usr/share/info \
+	#	--mandir=/usr/share/man || die "./configure failed"
+	# Note the use of --infodir and --mandir, above. This is to make
+	# this package FHS 2.2-compliant.  For more information, see
+	#   http://www.pathname.com/fhs/
+
+	# emake (previously known as pmake) is a script that calls the
+	# standard GNU make with parallel building options for speedier
+	# builds (especially on SMP systems).  Try emake first.  It might
+	# not work for some packages, because some makefiles have bugs
+	# related to parallelism, in these cases, use emake -j1 to limit
+	# make to a single process.  The -j1 is a visual clue to others
+	# that the makefiles have bugs that have been worked around.
+	emake || die "emake failed"
+}
+
+src_install() {
+	# You must *personally verify* that this trick doesn't install
+	# anything outside of DESTDIR; do this by reading and
+	# understanding the install part of the Makefiles.
+	# This is the preferred way to install.
+	emake DESTDIR="${D}" install || die "emake install failed"
+
+	# When you hit a failure with emake, do not just use make. It is
+	# better to fix the Makefiles to allow proper parallelization.
+	# If you fail with that, use "emake -j1", it's still better than make.
+
+	# For Makefiles that don't make proper use of DESTDIR, setting
+	# prefix is often an alternative.  However if you do this, then
+	# you also need to specify mandir and infodir, since they were
+	# passed to ./configure as absolute paths (overriding the prefix
+	# setting).
+	#emake \
+	#	prefix="${D}"/usr \
+	#	mandir="${D}"/usr/share/man \
+	#	infodir="${D}"/usr/share/info \
+	#	libdir="${D}"/usr/$(get_libdir) \
+	#	install || die "emake install failed"
+	# Again, verify the Makefiles!  We don't want anything falling
+	# outside of ${D}.
+
+	# The portage shortcut to the above command is simply:
+	#
+	#einstall || die "einstall failed"
+}

skel.metadata.xml

@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
+<!-- 
+$Header: /var/cvsroot/gentoo-x86/skel.metadata.xml,v 1.18 2008/07/28 19:27:05 cardoe Exp $
+
+This is the example metadata file.
+The root element of this file is <pkgmetadata>. Within this element a 
+number of subelements are allowed: herd, maintainer, and 
+longdescription. herd is a required subelement.
+
+For a full description look at:
+http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml?part=2&chap=4
+
+
+Before committing, please remove the comments from this file. They are 
+not relevant for general metadata.xml files.
+-->
+<pkgmetadata>
+<herd>no-herd</herd>
+<maintainer>
+  <email>@gentoo.org</email>
+<!--  <description>Description of the maintainership</description> -->
+</maintainer>
+<!-- <longdescription>Long description of the package</longdescription> -->
+<!--
+<use>
+  <flag name='flag'>Description of how USE='flag' affects this package</flag>
+  <flag name='userland_GNU'>Description of how USERLAND='GNU' affects this
+	  package</flag>
+  <flag name='aspell'>Uses <pkg>app-text/aspell</pkg> for spell checking.
+	  Requires an installed dictionary from <cat>app-dicts</cat></flag>
+</use>
+-->
+</pkgmetadata>