initial checkin

This commit is contained in:
Mario Fetka 2011-07-15 22:28:37 +02:00
commit 6080592e21
9 changed files with 403 additions and 0 deletions

1
12818.gif.sha1sum Normal file
View File

@ -0,0 +1 @@
1469dd62bd69a7a8a9d2372c41645277b8a271f1 /usr/portage/distfiles/12818.gif

218
CLIENT_DATA/setup.ins Normal file
View File

@ -0,0 +1,218 @@
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "font-ocr-ab"
Set $MinimumSpace$ = "10 MB"
; the path were we find the product after the installation
Set $InstallDir32$ = "%ProgramFiles32Dir%\OcrAB"
Set $InstallDir64$ = "%ProgramFiles64Dir%\OcrAB"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
if FileExists("%ScriptPath%\delsub.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
endif
if $LicenseRequired$ = "true"
comment "Licensing required, reserve license and get license key"
Sub_get_licensekey
endif
comment "installing"
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installing " + $ProductId$ + " 32 Bit..."
comment "Start setup program"
Winbatch_install_32
Sub_check_exitcode
comment "Copy files"
Files_install_32 /32Bit
comment "Patch Registry"
Registry_install /32Bit
comment "Create shortcuts"
LinkFolder_install
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installing " + $ProductId$ + " 64 Bit..."
comment "Start setup program"
Winbatch_install_64
Sub_check_exitcode
comment "Copy files"
Files_install_64 /64Bit
comment "Patch Registry"
Registry_install /64Bit
comment "Create shortcuts"
LinkFolder_install
endif
endif
[Winbatch_install_32]
"%ScriptPath%\files" & "FontReg32.exe /copy"
[Files_install_32]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"
[Winbatch_install_64]
"%ScriptPath%\files" & "FontReg64.exe /copy"
[Files_install_64]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters:
; working_dir: $InstallDir$
; icon_file:
; icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters: <some_param>
; working_dir: $InstallDir$
; icon_file: <path to icon file>
; icon_index: 2
; end_link
[Sub_get_licensekey]
if opsiLicenseManagementEnabled
comment "License management is enabled and will be used"
comment "Trying to get a license key"
Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
; If there is an assignment of exactly one licensepool to the product the following call is possible:
; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use:
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
DefVar $ServiceErrorClass$
set $ServiceErrorClass$ = getLastServiceErrorClass
comment "Error class: " + $ServiceErrorClass$
if $ServiceErrorClass$ = "None"
comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
else
if $ServiceErrorClass$ = "LicenseConfigurationError"
LogError "Fatal: license configuration must be corrected"
LogError getLastServiceErrorMessage
isFatalError
else
if $ServiceErrorClass$ = "LicenseMissingError"
LogError "Fatal: required license is not supplied"
isFatalError
endif
endif
endif
else
LogError "Fatal: license required, but license management not enabled"
isFatalError
endif
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif

0
OPSI/changelog.txt Normal file
View File

33
OPSI/control Normal file
View File

@ -0,0 +1,33 @@
[Package]
version: RELEASE
depends:
incremental: False
[Product]
type: localboot
id: font-ocr-ab
name: OCR Free Font Version A & B
description: OCR Free Font Version A & B
advice: ADVICE
version: VERSION
priority: PRIORITY
licenseRequired: False
productClasses:
setupScript: setup.ins
uninstallScript:
updateScript:
alwaysScript:
onceScript:
customScript:
userLoginScript:
[ProductProperty]
type: unicode
name: install_architecture
multivalue: False
editable: False
description: which architecture (32/64 bit) has to be installed
values: ["32 only", "64 only", "both", "system specific"]
default: ["system specific"]

9
OPSI/postinst Normal file
View File

@ -0,0 +1,9 @@
#! /bin/sh
#
# postinst script for softprod
# This script executes after unpacking files from that archive and registering the product at the server.
#
# The following environment variables can be used to obtain information about the current installation:
# PRODUCT_ID: id of the current product
# CLIENT_DATA_DIR: directory which contains the installed client data
#

9
OPSI/preinst Normal file
View File

@ -0,0 +1,9 @@
#! /bin/sh
#
# preinst script for softprod
# This script executes before that package will be unpacked from its archive file.
#
# The following environment variables can be used to obtain information about the current installation:
# PRODUCT_ID: id of the current product
# CLIENT_DATA_DIR: directory where client data will be installed
#

131
build.sh Normal file
View File

@ -0,0 +1,131 @@
#!/bin/sh
PN="font-ocr-ab"
VERSION="1"
RELEASE="1"
PRIORITY="0"
ADVICE=""
TYPE="restrict"
# all downloads should not have any traling parameters like ?downlaodid=1234 .....(should rewrite in python)
ICON="http://image.linotype.com/samples/text/12818.gif"
X86="http://code.kliu.org/misc/fontreg/fontreg-2.1.3-redist.7z"
X86_1="http://ansuz.sooke.bc.ca/fonts/ocr.zip"
#AMD64="http://downloads.sourceforge.net/sevenzip/7z920-x64.msi"
ICONFILE=${ICON##*/}
X86FILE=${X86##*/}
X86FILE_1=${X86_1##*/}
#AMD64FILE=${AMD64##*/}
if [ -e /var/tmp/opsi/upload/$TYPE/${PN}_${VERSION}-${RELEASE}.opsi ]
then
echo "package ${PN}_${VERSION}-${RELEASE}.opsi already generated"
exit 1
fi
OUT=$(mktemp -d /tmp/output.XXXXXXXXXX) || { echo "Failed to create temp dir"; exit 1; }
mkdir $OUT/$PN
cp -Rv OPSI CLIENT_DATA $OUT/$PN
unix2dos $OUT/$PN/CLIENT_DATA/*
if [ -e /usr/portage/distfiles/$ICONFILE ]
then
if [ -e $ICONFILE.sha1sum ]
then
SHA1SUM=`cat $ICONFILE.sha1sum`
CHECKSUM=`sha1sum /usr/portage/distfiles/$ICONFILE`
if [ "$CHECKSUM" = "$SHA1SUM" ]
then
convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -transparent white -background transparent -resize 160x160\> \
-size 160x160 xc:transparent +swap -gravity center -composite $OUT/$PN/CLIENT_DATA/$PN.png
else
echo "The checksums do not match."
exit 1
fi
else
echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$ICONFILE > $ICONFILE.sha1sum"
exit 1
fi
else
echo "Downloading file"
wget -P /usr/portage/distfiles/ $ICON
exit 1
fi
if [ -e /usr/portage/distfiles/$X86FILE ]
then
if [ -e $X86FILE.sha1sum ]
then
SHA1SUM=`cat $X86FILE.sha1sum`
CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE`
if [ "$CHECKSUM" = "$SHA1SUM" ]
then
mkdir -p $OUT/$PN/CLIENT_DATA/files
#cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA/files
7z x -o$OUT/$PN/CLIENT_DATA/files /usr/portage/distfiles/$X86FILE
cp $OUT/$PN/CLIENT_DATA/files/bin.x86-32/FontReg.exe $OUT/$PN/CLIENT_DATA/files/FontReg32.exe
cp $OUT/$PN/CLIENT_DATA/files/bin.x86-64/FontReg.exe $OUT/$PN/CLIENT_DATA/files/FontReg64.exe
else
echo "The checksums do not match."
exit 1
fi
else
echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE > $X86FILE.sha1sum"
exit 1
fi
else
echo "Downloading file"
wget -O /usr/portage/distfiles/$X86FILE $X86
#plowdown -o /usr/portage/distfiles $X86
exit 1
fi
if [ -e /usr/portage/distfiles/$X86FILE_1 ]
then
if [ -e $X86FILE_1.sha1sum ]
then
SHA1SUM=`cat $X86FILE_1.sha1sum`
CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE_1`
if [ "$CHECKSUM" = "$SHA1SUM" ]
then
#cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA
#mkdir -p $OUT/$PN/CLIENT_DATA/files
7z e -o$OUT/$PN/CLIENT_DATA/files /usr/portage/distfiles/$X86FILE_1
else
echo "The checksums do not match."
exit 1
fi
else
echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE_1 > $X86FILE_1.sha1sum"
exit 1
fi
else
echo "Downloading file"
wget -O /usr/portage/distfiles/$X86FILE_1 $X86_1
#plowdown -o /usr/portage/distfiles $X86
exit 1
fi
sed -e "s!VERSION!$VERSION!g" -e "s!RELEASE!$RELEASE!g" -e "s!PRIORITY!$PRIORITY!g" -e "s!ADVICE!$ADVICE!g" -i $OUT/$PN/OPSI/control
#sed -e "s!X86FILE!$X86FILE!g" -e "s!AMD64FILE!$AMD64FILE!g" -i $OUT/$PN/CLIENT_DATA/setup.ins
#sed -e "s!X86FILE!$X86FILE!g" -i $OUT/$PN/CLIENT_DATA/setup32.ins
if test -d ".git"; then
git log --date-order --date=short | \
sed -e '/^commit.*$/d' | \
awk '/^Author/ {sub(/\\$/,""); getline t; print $0 t; next}; 1' | \
sed -e 's/^Author: //g' | \
sed -e 's/>Date: \([0-9]*-[0-9]*-[0-9]*\)/>\t\1/g' | \
sed -e 's/^\(.*\) \(\)\t\(.*\)/\3 \1 \2/g' > $OUT/$PN/OPSI/changelog.txt
else
echo "No git repository present."
exit 1
fi
pushd $OUT
opsi-makeproductfile -v $OUT/$PN
popd
mkdir -p /var/tmp/opsi/upload/$TYPE/
cp -afv $OUT/*.opsi /var/tmp/opsi/upload/$TYPE/
#rm -rf $OUT

View File

@ -0,0 +1 @@
a7ded5853f8ea326e944fa111ab15da0fec4c023 /usr/portage/distfiles/fontreg-2.1.3-redist.7z

1
ocr.zip.sha1sum Normal file
View File

@ -0,0 +1 @@
76fdb611ff574e08a257c218dcff1fdf11b5fb30 /usr/portage/distfiles/ocr.zip