Initial commit vCopy tool

This commit is contained in:
Mario Fetka 2012-05-15 05:20:02 +02:00
commit 47d16804d9
12 changed files with 433 additions and 0 deletions

View File

@ -0,0 +1,79 @@
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Uninstalling " + $ProductId$ + " 32 Bit..."
comment "Delete files"
Files_uninstall_32 /32Bit
comment "Cleanup registry"
Registry_uninstall /32Bit
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Uninstalling " + $ProductId$ + " 64 Bit..."
comment "Delete files"
Files_uninstall_64 /64Bit
comment "Cleanup registry"
Registry_uninstall /64Bit
endif
comment "Delete program shortcuts"
LinkFolder_uninstall
[Files_uninstall_32]
delete -sf "$InstallDir32$\vcopy.exe"
[Files_uninstall_64]
delete -sf "$InstallDir64$\vcopy.exe"
[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif

161
CLIENT_DATA/setup3264.ins Normal file
View File

@ -0,0 +1,161 @@
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $INST_SystemType$
DefVar $INST_architecture$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
; and adds the following variables:
; from builder-product.cfg : all variables definded by attribute WINST[index]
; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE
; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL
; auto generated winst-variables
; $IconFile$: path to product picture
;
@@BUILDER_VARIABLES@@
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "kliu.vcopy"
Set $MinimumSpace$ = "1 MB"
; the path were we find the product after the installation
Set $InstallDir32$ = "%Systemroot%"
Set $InstallDir64$ = "%Systemroot%"
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
if FileExists("%ScriptPath%\delsub3264.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub3264.ins"
endif
comment "installing"
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installing " + $ProductId$ + " 32 Bit..."
comment "Copy files"
Files_install_32 /32Bit
comment "Patch Registry"
Registry_install /32Bit
comment "Create shortcuts"
LinkFolder_install
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installing " + $ProductId$ + " 64 Bit..."
comment "Copy files"
Files_install_64 /64Bit
comment "Patch Registry"
Registry_install /64Bit
comment "Create shortcuts"
LinkFolder_install
endif
endif
[Files_install_32]
copy "$Vcopy32Exe$" "$InstallDir32$"
[Files_install_64]
copy "$Vcopy64Exe$" "$InstallDir64$"
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters:
; working_dir: $InstallDir$
; icon_file:
; icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; name: $ProductId$
; target: <path to the program>
; parameters: <some_param>
; working_dir: $InstallDir$
; icon_file: <path to icon file>
; icon_index: 2
; end_link
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif

View File

@ -0,0 +1,53 @@
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
; and adds the following variables:
; from builder-product.cfg : all variables definded by attribute WINST[index]
; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE
; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL
; auto generated winst-variables
; $IconFile$: path to product picture
;
@@BUILDER_VARIABLES@@
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
Set $ProductId$ = "kliu.vcopy"
Set $InstallDir32$ = "%Systemroot%"
Set $InstallDir64$ = "%Systemroot%"
; ----------------------------------------------------------------
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
Message "Uninstalling " + $ProductId$ + " ..."
if FileExists("%ScriptPath%\delsub3264.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub3264.ins"
endif

1
Copy_disk.png.sha1sum Normal file
View File

@ -0,0 +1 @@
6b367980970aa5a6641a92dc0d3d555bad600136 /home/mario/.opsi-dist-cache/kliu.vcopy-1.2.2//Copy_disk.png

2
OPSI/changelog.txt Normal file
View File

@ -0,0 +1,2 @@
Don't add cahngelog entries here!
It get autogenerated by the opsi-builder.sh

32
OPSI/control Normal file
View File

@ -0,0 +1,32 @@
[Package]
version: RELEASE
depends:
incremental: False
[Product]
type: localboot
id: kliu.vcopy
name: vCopy
description: command-line file copy utility featuring better attribute and timestamp preservation
advice: ADVICE
version: VERSION
priority: PRIORITY
licenseRequired: False
productClasses:
setupScript: setup3264.ins
uninstallScript: uninstall3264.ins
updateScript:
alwaysScript:
onceScript:
customScript:
userLoginScript:
[ProductProperty]
type: unicode
name: install_architecture
multivalue: False
editable: False
description: which architecture (32/64 bit) has to be installed
values: ["32 only", "64 only", "both", "system specific"]
default: ["system specific"]

9
OPSI/postinst Normal file
View File

@ -0,0 +1,9 @@
#! /bin/sh
#
# postinst script for softprod
# This script executes after unpacking files from that archive and registering the product at the server.
#
# The following environment variables can be used to obtain information about the current installation:
# PRODUCT_ID: id of the current product
# CLIENT_DATA_DIR: directory which contains the installed client data
#

9
OPSI/preinst Normal file
View File

@ -0,0 +1,9 @@
#! /bin/sh
#
# preinst script for softprod
# This script executes before that package will be unpacked from its archive file.
#
# The following environment variables can be used to obtain information about the current installation:
# PRODUCT_ID: id of the current product
# CLIENT_DATA_DIR: directory where client data will be installed
#

28
Testing.txt Normal file
View File

@ -0,0 +1,28 @@
*** Qualitiymanagement/Testing procedure
- Product:
- Name: productname
- Version: xxx
- Release: yyyy
- Environment
- OS: Native windows XP-32Bit installation
- Preinstalled packages: None (also no aio)
- Files used while testing:
File1: http://domain.de/file.ext
- Testing process:
OPSI-action:
- Installation (without dependencies like AIO/Firefox): ??
Result:
- File extensions related to program: ??
- Start menu entry: ??
- Starting/using program: viewer works, File1 is shown correctly: ??
OPSI-action:
- Uninstall
Result:
- File extensions related to program: unrelated: ??
- Start menu entry: none: ??

33
builder-product.cfg Normal file
View File

@ -0,0 +1,33 @@
############################
# Setup product information
############################
VENDOR="code.kliu.org"
PN="kliu.vcopy"
VERSION="1.2.2"
RELEASE="3"
PRIORITY="0"
ADVICE=""
# TYPE - defines, if the install files are public or restricted.
# Valid value: restricted | public
TYPE="public"
DL_FILE[0]="Copy_disk.png"
DL_SOURCE[0]="http://www.veryicon.com/icon/png/System/Heavily%20Brushed/Copy%20disk.png"
DL_FILE[1]="vcopy-${VERSION}-redist.7z"
DL_SOURCE[1]="http://code.kliu.org/misc/vcopy/vcopy-${VERSION}-redist.7z"
DL_ARCH[1]="X86"
DL_EXTRACT_FORMAT[1]="7zip"
# File array index for the image showing while installing the program
ICON_DL_INDEX=0
WINST_NAME[0]="Vcopy32Exe"
WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[1]@\\bin.x86-32\\vcopy.exe"
WINST_NAME[1]="Vcopy64Exe"
WINST_VALUE[1]="@DL_EXTRACT_WINST_PATH[1]@\\bin.x86-64\\vcopy.exe"

25
builder-targets-cb.sh Normal file
View File

@ -0,0 +1,25 @@
##############################################################################
# This optional file "builder-targets-cb.sh" will be called by builder.sh
#
# The targets will be called from thde opsi-builder using the following
# order: config, prepare, retrieve, create, package, publish, commit, cleanup
# You can overwrite the target functions in builder-targets-cb.sh
#
# You can define callback functions. The functions are called from
# opsi-builder within processing a target
# cb_package_makeproductfile
#
# You can use every variable defined in any configuration file or by
# the defined builder script itself. Also, calling the predefined
# targets builder_<targetname> is possible.
#
# Abstract:
# target order: config, prepare, retrieve, create, package, publish, commit, cleanup
# callbacks: <none>
#
##############################################################################
function cleanup() {
echo "Cleanup"
builder_cleanup
}

View File

@ -0,0 +1 @@
9f3f094b9dbf48a2a2e3592b7fbd0423a223363e /home/mario/.opsi-dist-cache/kliu.vcopy-1.2.2/X86/vcopy-1.2.2-redist.7z