diff --git a/CLIENT_DATA/delsub.ins b/CLIENT_DATA/delsub3264.ins similarity index 75% rename from CLIENT_DATA/delsub.ins rename to CLIENT_DATA/delsub3264.ins index 9e23e1a..c3f7f1d 100644 --- a/CLIENT_DATA/delsub.ins +++ b/CLIENT_DATA/delsub3264.ins @@ -4,15 +4,25 @@ ; credits: http://www.opsi.org/credits/ -Set $MsiId32$ = '{537056B7-32A4-4408-9B54-0341963C7C9C}' Set $UninstallProgram32$ = $InstallDir32$ + "\uninstall.exe" +Set $UninstallProgram64$ = $InstallDir64$ + "\uninstall.exe" +Set $IniFile32$ = $InstallDir32$ + "\opsi-" + $ProductId$ + ".ini" +Set $IniFile64$ = $InstallDir64$ + "\opsi-" + $ProductId$ + ".ini" + -Set $MsiId64$ = '{F24FF688-7138-4CCF-A83F-71E9FB01170E}' -Set $UninstallProgram32$ = $InstallDir64$ + "\uninstall.exe" if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") Message "Uninstalling " + $ProductId$ + " 32 Bit..." + if FileExists($IniFile32$) + Set $MsiIdOld32$ = GetValueFromInifile($IniFile32$,"X86","MsiId32","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}") + if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld32$ + "] DisplayName") = "") + comment "Old MSI id " + $MsiIdOld32$ + " found in registry, starting msiexec to uninstall old version" + Winbatch_uninstall_msi_old_32 + sub_check_exitcode + endif + endif + if FileExists($UninstallProgram32$) comment "Uninstall program found, starting uninstall" Winbatch_uninstall_32 @@ -34,6 +44,14 @@ endif if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) Message "Uninstalling " + $ProductId$ + " 64 Bit..." + if FileExists($IniFile64$) + Set $MsiIdOld64$ = GetValueFromInifile($IniFile64$,"X86_64","MsiId64","{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}") + if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiIdOld64$ + "] DisplayName") = "") + comment "Old MSI id " + $MsiIdOld64$ + " found in registry, starting msiexec to uninstall old version" + Winbatch_uninstall_msi_old_64 + sub_check_exitcode + endif + endif if FileExists($UninstallProgram64$) comment "Uninstall program found, starting uninstall" Winbatch_uninstall_64 @@ -62,9 +80,12 @@ LinkFolder_uninstall ; "$UninstallProgram32$" /S ; ; === Inno Setup ======================================================================================== -; "$UninstallProgram32$" /silent /norestart +; "$UninstallProgram32$" /silent /norestart /SUPPRESSMSGBOXES +[Winbatch_uninstall_msi_old_32] +msiexec /x $MsiIdOld32$ /qb! REBOOT=ReallySuppress + [Winbatch_uninstall_msi_32] msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress @@ -80,9 +101,12 @@ msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress ; "$UninstallProgram64$" /S ; ; === Inno Setup ======================================================================================== -; "$UninstallProgram64$" /silent /norestart +; "$UninstallProgram64$" /silent /norestart /SUPPRESSMSGBOXES +[Winbatch_uninstall_msi_old_64] +msiexec /x $MsiIdOld64$ /qb! REBOOT=ReallySuppress + [Winbatch_uninstall_msi_64] msiexec /x $MsiId64$ /qb! REBOOT=ReallySuppress diff --git a/CLIENT_DATA/opsi-realtimesoft.ultramon.ini b/CLIENT_DATA/opsi-realtimesoft.ultramon.ini new file mode 100644 index 0000000..c13f86f --- /dev/null +++ b/CLIENT_DATA/opsi-realtimesoft.ultramon.ini @@ -0,0 +1,10 @@ +[X86] +MsiId32={537056B7-32A4-4408-9B54-0341963C7C9C} + +[X86_64] +MsiId64={F24FF688-7138-4CCF-A83F-71E9FB01170E} + +[COMMON] +PN=realtimesoft.ultramon +VERSION=3.1.0 + diff --git a/CLIENT_DATA/setup.ins b/CLIENT_DATA/setup3264.ins similarity index 70% rename from CLIENT_DATA/setup.ins rename to CLIENT_DATA/setup3264.ins index 53b597e..c08e420 100644 --- a/CLIENT_DATA/setup.ins +++ b/CLIENT_DATA/setup3264.ins @@ -6,10 +6,15 @@ [Actions] requiredWinstVersion >= "4.10.8.6" -DefVar $MsiId32$ +; DefVar $MsiId32$ +DefVar $MsiIdOld32$ DefVar $UninstallProgram32$ -DefVar $MsiId64$ +DefVar $IniFile32$ +; DefVar $MsiId64$ +DefVar $MsiIdOld64$ DefVar $UninstallProgram64$ +DefVar $IniFile64$ +DefVar $IniCfgFile$ DefVar $LogDir$ DefVar $ProductId$ DefVar $MinimumSpace$ @@ -24,21 +29,33 @@ DefVar $INST_architecture$ Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty("install_architecture","system specific") +Set $OrgName$ = GetProductProperty ("orgname","OrgName") Set $LogDir$ = "%SystemDrive%\tmp" +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + ; ---------------------------------------------------------------- ; - Please edit the following values - ; ---------------------------------------------------------------- ;$ProductId$ should be the name of the product in opsi ; therefore please: only lower letters, no umlauts, ; no white space use '-' as a seperator -Set $ProductId$ = "ultramon" -Set $MinimumSpace$ = "40 MB" +Set $ProductId$ = "realtimesoft.ultramon" +Set $MinimumSpace$ = "10 MB" ; the path were we find the product after the installation Set $InstallDir32$ = "%ProgramFiles32Dir%\UltraMon" Set $InstallDir64$ = "%ProgramFiles64Dir%\UltraMon" +Set $IniCfgFile$ = "%ScriptPath%\opsi-" + $ProductId$ + ".ini" Set $LicenseRequired$ = "true" Set $LicensePool$ = "p_" + $ProductId$ ; ---------------------------------------------------------------- @@ -51,9 +68,9 @@ else comment "Show product picture" ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ - if FileExists("%ScriptPath%\delsub.ins") + if FileExists("%ScriptPath%\delsub3264.ins") comment "Start uninstall sub section" - Sub "%ScriptPath%\delsub.ins" + Sub "%ScriptPath%\delsub3264.ins" endif if $LicenseRequired$ = "true" @@ -92,27 +109,21 @@ else endif [Winbatch_install_32] -; Choose one of the following examples as basis for your installation -; You can use $LicenseKey$ var to pass a license key to the installer -; -; === MSI package ======================================================================================= -; You may use the parameter PIDKEY=$Licensekey$ -msiexec /i "%ScriptPath%\X86FILE" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress USERNAME="%PCName%" PIDKEY=$LicenseKey$ +msiexec /i "$Install32Msi$" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress USERNAME="$OrgName$" PIDKEY=$LicenseKey$ [Files_install_32] +copy "$IniCfgFile$" "$InstallDir32$" + ; Example of recursively copying some files into the installation directory: ; ; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$" [Winbatch_install_64] -; Choose one of the following examples as basis for your installation -; You can use $LicenseKey$ var to pass a license key to the installer -; -; === MSI package ======================================================================================= -; You may use the parameter PIDKEY=$Licensekey$ -msiexec /i "%ScriptPath%\AMD64FILE" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress USERNAME="%PCName%" PIDKEY=$LicenseKey$ +msiexec /i "$Install64Msi$" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress USERNAME="$OrgName$" PIDKEY=$LicenseKey$ [Files_install_64] +copy "$IniCfgFile$" "$InstallDir64$" + ; Example of recursively copying some files into the installation directory: ; ; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$" @@ -160,43 +171,37 @@ msiexec /i "%ScriptPath%\AMD64FILE" /l* "$LogDir$\$ProductId$.install_log.txt" / ; end_link [Sub_get_licensekey] -if opsiLicenseManagementEnabled - comment "License management is enabled and will be used" +comment "License management is enabled and will be used" - comment "Trying to get a license key" - Set $LicenseKey$ = demandLicenseKey ($LicensePool$) - ; If there is an assignment of exactly one licensepool to the product the following call is possible: - ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) - ; - ; If there is an assignment of a license pool to a windows software id, it is possible to use: - ; DefVar $WindowsSoftwareId$ - ; $WindowsSoftwareId$ = "..." - ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) - - DefVar $ServiceErrorClass$ - set $ServiceErrorClass$ = getLastServiceErrorClass - comment "Error class: " + $ServiceErrorClass$ - - if $ServiceErrorClass$ = "None" - comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" - else - if $ServiceErrorClass$ = "LicenseConfigurationError" - LogError "Fatal: license configuration must be corrected" - LogError getLastServiceErrorMessage +comment "Trying to get a license key" +Set $LicenseKey$ = demandLicenseKey ($LicensePool$) +; If there is an assignment of exactly one licensepool to the product the following call is possible: +; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) +; +; If there is an assignment of a license pool to a windows software id, it is possible to use: +; DefVar $WindowsSoftwareId$ +; $WindowsSoftwareId$ = "..." +; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) + +DefVar $ServiceErrorClass$ +set $ServiceErrorClass$ = getLastServiceErrorClass +comment "Error class: " + $ServiceErrorClass$ + +if $ServiceErrorClass$ = "None" + comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" +else + if $ServiceErrorClass$ = "LicenseConfigurationError" + LogError "Fatal: license configuration must be corrected" + LogError getLastServiceErrorMessage + isFatalError + else + if $ServiceErrorClass$ = "LicenseMissingError" + LogError "Fatal: required license is not supplied" isFatalError - else - if $ServiceErrorClass$ = "LicenseMissingError" - LogError "Fatal: required license is not supplied" - isFatalError - endif endif endif -else - LogError "Fatal: license required, but license management not enabled" - isFatalError endif - [Sub_check_exitcode] comment "Test for installation success via exit code" set $ExitCode$ = getLastExitCode diff --git a/CLIENT_DATA/uninstall.ins b/CLIENT_DATA/uninstall.ins deleted file mode 100644 index a011397..0000000 --- a/CLIENT_DATA/uninstall.ins +++ /dev/null @@ -1,75 +0,0 @@ -; Copyright (c) uib gmbh (www.uib.de) -; This sourcecode is owned by uib gmbh -; and published under the Terms of the General Public License. -; credits: http://www.opsi.org/credits/ - -[Actions] -requiredWinstVersion >= "4.10.8.6" - -DefVar $MsiId32$ -DefVar $UninstallProgram32$ -DefVar $MsiId64$ -DefVar $UninstallProgram64$ -DefVar $LogDir$ -DefVar $ExitCode$ -DefVar $ProductId$ -DefVar $InstallDir32$ -DefVar $InstallDir64$ -DefVar $LicenseRequired$ -DefVar $LicensePool$ -DefVar $INST_SystemType$ -DefVar $INST_architecture$ - -Set $INST_SystemType$ = GetSystemType -set $INST_architecture$ = GetProductProperty("install_architecture","system specific") - - -Set $LogDir$ = "%SystemDrive%\tmp" - -; ---------------------------------------------------------------- -; - Please edit the following values - -; ---------------------------------------------------------------- -Set $ProductId$ = "ultramon" -Set $InstallDir32$ = "%ProgramFiles32Dir%\UltraMon" -Set $InstallDir64$ = "%ProgramFiles64Dir%\UltraMon" -Set $LicenseRequired$ = "true" -Set $LicensePool$ = "p_" + $ProductId$ -; ---------------------------------------------------------------- - - -comment "Show product picture" -ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ - -Message "Uninstalling " + $ProductId$ + " ..." - -if FileExists("%ScriptPath%\delsub.ins") - comment "Start uninstall sub section" - Sub "%ScriptPath%\delsub.ins" -endif - -if $LicenseRequired$ = "true" - comment "Licensing required, free license used" - Sub_free_license -endif - -[Sub_free_license] -if opsiLicenseManagementEnabled - comment "License management is enabled and will be used" - - comment "Trying to free license used for the product" - DefVar $result$ - Set $result$ = FreeLicense($LicensePool$) - ; If there is an assignment of a license pool to the product, it is possible to use - ; Set $result$ = FreeLicense("", $ProductId$) - ; - ; If there is an assignment of a license pool to a windows software id, it is possible to use - ; DefVar $WindowsSoftwareId$ - ; $WindowsSoftwareId$ = "..." - ; set $result$ = FreeLicense("", "", $WindowsSoftwareId$) -else - LogError "Error: licensing required, but license management not enabled" - isFatalError -endif - - - diff --git a/CLIENT_DATA/uninstall3264.ins b/CLIENT_DATA/uninstall3264.ins new file mode 100644 index 0000000..c3266b6 --- /dev/null +++ b/CLIENT_DATA/uninstall3264.ins @@ -0,0 +1,84 @@ +; Copyright (c) uib gmbh (www.uib.de) +; This sourcecode is owned by uib gmbh +; and published under the Terms of the General Public License. +; credits: http://www.opsi.org/credits/ + +[Actions] +requiredWinstVersion >= "4.10.8.6" + +; DefVar $MsiId32$ +DefVar $MsiIdOld32$ +DefVar $UninstallProgram32$ +DefVar $IniFile32$ +; DefVar $MsiId64$ +DefVar $MsiIdOld64$ +DefVar $UninstallProgram64$ +DefVar $IniFile64$ +DefVar $IniCfgFile$ +DefVar $LogDir$ +DefVar $ExitCode$ +DefVar $ProductId$ +DefVar $InstallDir32$ +DefVar $InstallDir64$ +DefVar $LicenseRequired$ +DefVar $LicensePool$ +DefVar $INST_SystemType$ +DefVar $INST_architecture$ + +Set $INST_SystemType$ = GetSystemType +set $INST_architecture$ = GetProductProperty("install_architecture","system specific") + + +Set $LogDir$ = "%SystemDrive%\tmp" + +; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh +; and adds the following variables: +; from builder-product.cfg : all variables definded by attribute WINST[index] +; from builder-product.cfg : VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE +; from opsi-builder.cfg : CREATOR_TAG CREATOR_NAME CREATOR_EMAIL +; auto generated winst-variables +; $IconFile$: path to product picture +; +@@BUILDER_VARIABLES@@ + +; ---------------------------------------------------------------- +; - Please edit the following values - +; ---------------------------------------------------------------- +Set $ProductId$ = "realtimesoft.ultramon" +Set $InstallDir32$ = "%ProgramFiles32Dir%\UltraMon" +Set $InstallDir64$ = "%ProgramFiles64Dir%\UltraMon" +Set $LicenseRequired$ = "true" +Set $LicensePool$ = "p_" + $ProductId$ +; ---------------------------------------------------------------- + + +comment "Show product picture" +ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + +Message "Uninstalling " + $ProductId$ + " ..." + +if FileExists("%ScriptPath%\delsub3264.ins") + comment "Start uninstall sub section" + Sub "%ScriptPath%\delsub3264.ins" +endif + +if $LicenseRequired$ = "true" + comment "Licensing required, free license used" + Sub_free_license +endif + +[Sub_free_license] +comment "License management is enabled and will be used" + +comment "Trying to free license used for the product" +DefVar $result$ +Set $result$ = FreeLicense($LicensePool$) +; If there is an assignment of a license pool to the product, it is possible to use +; Set $result$ = FreeLicense("", $ProductId$) +; +; If there is an assignment of a license pool to a windows software id, it is possible to use +; DefVar $WindowsSoftwareId$ +; $WindowsSoftwareId$ = "..." +; set $result$ = FreeLicense("", "", $WindowsSoftwareId$) + + diff --git a/OPSI/changelog.txt b/OPSI/changelog.txt index e69de29..bc69317 100644 --- a/OPSI/changelog.txt +++ b/OPSI/changelog.txt @@ -0,0 +1,2 @@ +Don't add cahngelog entries here! +It get autogenerated by the opsi-builder.sh \ No newline at end of file diff --git a/OPSI/control b/OPSI/control index f9199ad..ad2590e 100644 --- a/OPSI/control +++ b/OPSI/control @@ -5,16 +5,16 @@ incremental: False [Product] type: localboot -id: ultramon -name: UltraMon -description: UltraMon is a utility for multi-monitor systems, designed to increase productivity and unlock the full potential of multiple monitors. +id: realtimesoft.ultramon +name:realtimesoft.ultramon +description: Get the most out of multiple monitors with UltraMon advice: ADVICE version: VERSION priority: PRIORITY licenseRequired: False productClasses: -setupScript: setup.ins -uninstallScript: uninstall.ins +setupScript: setup3264.ins +uninstallScript: uninstall3264.ins updateScript: alwaysScript: onceScript: @@ -30,3 +30,17 @@ description: which architecture (32/64 bit) has to be installed values: ["32 only", "64 only", "both", "system specific"] default: ["system specific"] +[ProductDependency] +action: setup +requiredProduct: aio +requiredStatus: installed +requirementType: before + +[ProductProperty] +type: unicode +name: orgname +multivalue: False +editable: True +description: The name the software is registered to +values: [""] +default: ["OrgName"] diff --git a/Testing.txt b/Testing.txt new file mode 100644 index 0000000..d6b5e6c --- /dev/null +++ b/Testing.txt @@ -0,0 +1,28 @@ +*** Qualitiymanagement/Testing procedure + +- Product: + - Name: productname + - Version: xxx + - Release: yyyy + +- Environment + - OS: Native windows XP-32Bit installation + - Preinstalled packages: None (also no aio) + - Files used while testing: + File1: http://domain.de/file.ext + +- Testing process: + OPSI-action: + - Installation (without dependencies like AIO/Firefox): ?? + Result: + - File extensions related to program: ?? + - Start menu entry: ?? + - Starting/using program: viewer works, File1 is shown correctly: ?? + + OPSI-action: + - Uninstall + Result: + - File extensions related to program: unrelated: ?? + - Start menu entry: none: ?? + + diff --git a/build.sh b/build.sh deleted file mode 100644 index 1ba09fa..0000000 --- a/build.sh +++ /dev/null @@ -1,122 +0,0 @@ -#!/bin/sh -PN="ultramon" -VERSION="3.1.0" -RELEASE="2" -PRIORITY="0" -ADVICE="" -TYPE="public" -# all downloads should not have any traling parameters like ?downlaodid=1234 .....(should rewrite in python) -ICON="http://www.realtimesoft.com/ultramon/ultramon_logo.jpg" -X86="http://www.realtimesoft.com/files/UltraMon_3.1.0_de_x32.msi" -AMD64="http://www.realtimesoft.com/files/UltraMon_3.1.0_de_x64.msi" -ICONFILE=${ICON##*/} -X86FILE=${X86##*/} -AMD64FILE=${AMD64##*/} - - if [ -e /var/tmp/opsi/upload/$TYPE/${PN}_${VERSION}-${RELEASE}.opsi ] - then - echo "package ${PN}_${VERSION}-${RELEASE}.opsi already generated" - exit 1 - fi - -OUT=$(mktemp -d /tmp/output.XXXXXXXXXX) || { echo "Failed to create temp dir"; exit 1; } -mkdir $OUT/$PN -cp -Rv OPSI CLIENT_DATA $OUT/$PN -unix2dos $OUT/$PN/CLIENT_DATA/* - - if [ -e /usr/portage/distfiles/$ICONFILE ] - then - if [ -e $ICONFILE.sha1sum ] - then - SHA1SUM=`cat $ICONFILE.sha1sum` - CHECKSUM=`sha1sum /usr/portage/distfiles/$ICONFILE` - if [ "$CHECKSUM" = "$SHA1SUM" ] - then - convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -transparent white -background transparent -resize 160x160\> \ - -size 160x160 xc:transparent +swap -gravity center -composite $OUT/$PN/CLIENT_DATA/$PN.png -# convert -colorspace rgb /usr/portage/distfiles/$ICONFILE -resize x160 -gravity center -crop 160x160+0+0 +repage $OUT/$PN/CLIENT_DATA/$PN.png - - else - echo "The checksums do not match." - exit 1 - fi - else - echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$ICONFILE > $ICONFILE.sha1sum" - exit 1 - fi - else - echo "Downloading file" - wget -P /usr/portage/distfiles/ $ICON - exit 1 - fi - - if [ -e /usr/portage/distfiles/$X86FILE ] - then - if [ -e $X86FILE.sha1sum ] - then - SHA1SUM=`cat $X86FILE.sha1sum` - CHECKSUM=`sha1sum /usr/portage/distfiles/$X86FILE` - if [ "$CHECKSUM" = "$SHA1SUM" ] - then - cp /usr/portage/distfiles/$X86FILE $OUT/$PN/CLIENT_DATA - else - echo "The checksums do not match." - exit 1 - fi - else - echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$X86FILE > $X86FILE.sha1sum" - exit 1 - fi - else - echo "Downloading file" - wget -P /usr/portage/distfiles/ $X86 - exit 1 - fi - - if [ -e /usr/portage/distfiles/$AMD64FILE ] - then - if [ -e $AMD64FILE.sha1sum ] - then - SHA1SUM=`cat $AMD64FILE.sha1sum` - CHECKSUM=`sha1sum /usr/portage/distfiles/$AMD64FILE` - if [ "$CHECKSUM" = "$SHA1SUM" ] - then - cp /usr/portage/distfiles/$AMD64FILE $OUT/$PN/CLIENT_DATA - else - echo "The checksums do not match." - exit 1 - fi - else - echo "You need to create the checksums with: sha1sum /usr/portage/distfiles/$AMD64FILE > $AMD64FILE.sha1sum" - exit 1 - fi - else - echo "Downloading file" - wget -P /usr/portage/distfiles/ $AMD64 - exit 1 - fi - -sed -e "s!VERSION!$VERSION!g" -e "s!RELEASE!$RELEASE!g" -e "s!PRIORITY!$PRIORITY!g" -e "s!ADVICE!$ADVICE!g" -i $OUT/$PN/OPSI/control -sed -e "s!X86FILE!$X86FILE!g" -e "s!AMD64FILE!$AMD64FILE!g" -i $OUT/$PN/CLIENT_DATA/setup.ins - -if test -d ".git"; then - git log --date-order --date=short | \ - sed -e '/^commit.*$/d' | \ - awk '/^Author/ {sub(/\\$/,""); getline t; print $0 t; next}; 1' | \ - sed -e 's/^Author: //g' | \ - sed -e 's/>Date: \([0-9]*-[0-9]*-[0-9]*\)/>\t\1/g' | \ - sed -e 's/^\(.*\) \(\)\t\(.*\)/\3 \1 \2/g' > $OUT/$PN/OPSI/changelog.txt -else - echo "No git repository present." - exit 1 -fi - -pushd $OUT -opsi-makeproductfile -v $OUT/$PN -popd - -mkdir -p /var/tmp/opsi/upload/$TYPE/ -cp -afv $OUT/*.opsi /var/tmp/opsi/upload/$TYPE/ - -#rm -rf $OUT - diff --git a/builder-product.cfg b/builder-product.cfg new file mode 100644 index 0000000..8751516 --- /dev/null +++ b/builder-product.cfg @@ -0,0 +1,36 @@ +############################ +# Setup product information +############################ +VENDOR="realtimesoft.com" +PN="realtimesoft.ultramon" +VERSION="3.1.0" +RELEASE="3" +PRIORITY="0" +ADVICE="" + +# TYPE - defines, if the install files are public or restricted. +# Valid value: restricted | public +TYPE="public" + + +DL_FILE[0]="win-ultramon.jpg" +DL_SOURCE[0]="http://cache.gawkerassets.com/assets/images/lifehacker/2011/04/win-ultramon.jpg" + +DL_FILE[1]="UltraMon_3.1.0_de_x32.msi" +DL_SOURCE[1]="http://realtimesoft.com/files/UltraMon_3.1.0_de_x32.msi" +DL_ARCH[1]="X86" +DL_WINST_NAME[1]=Install32Msi + +DL_FILE[2]="UltraMon_3.1.0_de_x64.msi" +DL_SOURCE[2]="http://realtimesoft.com/files/UltraMon_3.1.0_de_x64.msi" +DL_ARCH[2]="X86_64" +DL_WINST_NAME[2]=Install64Msi + +# File array index for the image showing while installing the program +ICON_DL_INDEX=0 + +WINST_NAME[0]="MsiId32" +WINST_VALUE[0]="{537056B7-32A4-4408-9B54-0341963C7C9C}" + +WINST_NAME[1]="MsiId64" +WINST_VALUE[1]="{F24FF688-7138-4CCF-A83F-71E9FB01170E}" diff --git a/builder-targets-cb.sh b/builder-targets-cb.sh new file mode 100644 index 0000000..9a3d4a8 --- /dev/null +++ b/builder-targets-cb.sh @@ -0,0 +1,25 @@ +############################################################################## +# This optional file "builder-targets-cb.sh" will be called by builder.sh +# +# The targets will be called from thde opsi-builder using the following +# order: config, prepare, retrieve, create, package, publish, commit, cleanup +# You can overwrite the target functions in builder-targets-cb.sh +# +# You can define callback functions. The functions are called from +# opsi-builder within processing a target +# cb_package_makeproductfile +# +# You can use every variable defined in any configuration file or by +# the defined builder script itself. Also, calling the predefined +# targets builder_ is possible. +# +# Abstract: +# target order: config, prepare, retrieve, create, package, publish, commit, cleanup +# callbacks: +# +############################################################################## + +function cleanup() { + echo "Cleanup" + builder_cleanup +} diff --git a/ultramon_logo.jpg.sha1sum b/ultramon_logo.jpg.sha1sum deleted file mode 100644 index 4c47c1d..0000000 --- a/ultramon_logo.jpg.sha1sum +++ /dev/null @@ -1 +0,0 @@ -a343e4b3bceb379c877a0d19a431af1aa4294340 /usr/portage/distfiles/ultramon_logo.jpg diff --git a/win-ultramon.jpg.sha1sum b/win-ultramon.jpg.sha1sum new file mode 100644 index 0000000..e3c415a --- /dev/null +++ b/win-ultramon.jpg.sha1sum @@ -0,0 +1 @@ +ac16b69369845a77e0e0f95f2fa1a1539ca1d332 /home/mario/.opsi-dist-cache/realtimesoft.ultramon-3.1.0//win-ultramon.jpg