init

CLIENT_DATA/setup32.ins

@@ -0,0 +1,79 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $MsiId$
+DefVar $LogDir$
+DefVar $ProductId$  
+DefVar $MinimumSpace$
+DefVar $InstallDir$
+DefVar $ExitCode$
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+;$ProductId$ should be the name of the product in opsi
+; therefore please: only lower letters, no umlauts, 
+; no white space use '-' as a seperator
+Set $ProductId$       = "sp-tl-wn721n"
+Set $MinimumSpace$    = "150 MB"
+; the path were we find the product after the installation
+Set $InstallDir$      = "%SystemDrive%\Windows\inf"
+; ----------------------------------------------------------------
+
+if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
+	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
+	isFatalError
+	; Stop process and set installation status to failed
+else
+	comment "Show product picture"
+	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+	
+	if FileExists("%ScriptPath%\delsub32.ins")
+		comment "Start uninstall sub section"
+		Sub "%ScriptPath%\delsub32.ins"
+	endif
+	
+	Message "Installing " + $ProductId$ + " ..."
+                	
+	comment "Copy files"
+	Files_install /32Bit
+	
+	comment "Patch Registry"
+	Registry_install /32Bit
+	
+        DosInAnIcon_Create
+        
+        comment "Reboot"
+        ExitWindows /Reboot
+	
+endif
+
+[Files_install]
+copy -s "$Drv_Dir$TL-WN721N\Driver Files\Windows 2000_XP\*.*" "$InstallDir$\wlan"
+
+[Registry_install]
+; Example of setting some values of an registry key:
+openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion]
+set "DevicePath" = "%SystemRoot%\inf;$InstallDir$\wlan"
+
+
+[DosInAnIcon_Create]
+rundll32 syssetup,SetupInfObjectInstallAction DefaultInstall 128 $InstallDir$\wlan\netathuw.inf
+

CLIENT_DATA/uninstall32.ins

@@ -0,0 +1,68 @@
+; Copyright (c) uib gmbh (www.uib.de)
+; This sourcecode is owned by uib gmbh
+; and published under the Terms of the General Public License.
+; credits: http://www.opsi.org/credits/
+
+[Actions]
+requiredWinstVersion >= "4.10.8.6"
+
+DefVar $MsiId$
+DefVar $UninstallProgram$
+DefVar $LogDir$
+DefVar $ExitCode$
+DefVar $ProductId$
+DefVar $InstallDir$
+DefVar $LicenseRequired$
+DefVar $LicensePool$
+
+Set $LogDir$ = "%SystemDrive%\tmp"
+
+; The token BUILDER_VARIABLES will be replaced by opsi-builder.sh
+; and adds the following variables:
+;   from builder-product.cfg :  all variables definded by attribute WINST[index]
+;   from builder-product.cfg :  VENDOR PN VERSION RELEASE PRIORITY ADVICE TYPE   
+;   from opsi-builder.cfg    :  CREATOR_TAG CREATOR_NAME CREATOR_EMAIL           
+;   auto generated winst-variables
+;         $IconFile$: path to product picture
+;
+@@BUILDER_VARIABLES@@
+
+; ----------------------------------------------------------------
+; - Please edit the following values                             -
+; ----------------------------------------------------------------
+Set $ProductId$       = "opsi-template"
+Set $InstallDir$      = "%ProgramFiles32Dir%\OpenVPN"
+Set $LicenseRequired$ = "false"
+Set $LicensePool$     = "p_" + $ProductId$
+; ----------------------------------------------------------------
+
+
+comment "Show product picture"
+ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
+
+Message "Uninstalling " + $ProductId$ + " ..."
+
+if FileExists("%ScriptPath%\delsub32.ins")
+	comment "Start uninstall sub section"
+	Sub "%ScriptPath%\delsub32.ins"
+endif
+
+if $LicenseRequired$ = "true"
+	comment "Licensing required, free license used"
+	Sub_free_license
+endif
+
+[Sub_free_license]
+comment "License management is enabled and will be used"
+
+comment "Trying to free license used for the product"
+DefVar $result$
+Set $result$ = FreeLicense($LicensePool$)
+; If there is an assignment of a license pool to the product, it is possible to use
+; Set $result$ = FreeLicense("", $ProductId$)
+;
+; If there is an assignment of a license pool to a windows software id, it is possible to use
+; DefVar $WindowsSoftwareId$
+; $WindowsSoftwareId$ = "..."
+; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
+

OPSI/changelog.txt

@@ -0,0 +1,2 @@
+Don't add cahngelog entries here!
+It get autogenerated by the opsi-builder.sh

OPSI/control

@@ -0,0 +1,32 @@
+[Package]
+version: RELEASE
+depends: 
+incremental: False
+
+[Product]
+type: localboot
+id: tp-link.wn721n
+name: tp-link.wn721n
+description: Device driver for USB WLAN Stick wn721n from tp-link.com
+advice: ADVICE
+version: VERSION
+priority: PRIORITY
+licenseRequired: False
+productClasses: 
+setupScript: setup32.ins
+uninstallScript: uninstall32.ins
+updateScript: 
+alwaysScript: 
+onceScript: 
+customScript: 
+userLoginScript: 
+
+[ProductProperty]
+type: unicode
+name: install_architecture
+multivalue: False
+editable: False
+description: which architecture (32/64 bit) has to be installed
+values: ["32 only", "64 only", "both", "system specific"]
+default: ["system specific"]
+

OPSI/postinst

@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# postinst script for softprod
+# This script executes after unpacking files from that archive and registering the product at the server.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory which contains the installed client data
+#

OPSI/preinst

@@ -0,0 +1,9 @@
+#! /bin/sh
+#
+# preinst script for softprod
+# This script executes before that package will be unpacked from its archive file.
+#
+# The following environment variables can be used to obtain information about the current installation:
+#   PRODUCT_ID: id of the current product
+#   CLIENT_DATA_DIR: directory where client data will be installed
+#

TL-WN721N_100629.zip.sha1sum

@@ -0,0 +1 @@
+c6292651b595f4d7355a38d9cdc4a198ef04a4ef  /home/dtrinks/.opsi-dist-cache/sp-tl-wn721n/TL-WN721N/1/X86/TL-WN721N_100629.zip

builder-product.cfg

@@ -0,0 +1,29 @@
+############################
+# Setup product information 
+############################
+VENDOR="tp-link.com"
+PN="tp-link.wn721n"
+VERSION="1"
+RELEASE="1"
+PRIORITY="0"
+ADVICE=""
+
+# TYPE - defines, if the install files are public or restricted. 
+# Valid value: restricted | public
+TYPE="public"
+  
+DL_FILE[0]="tp-link.jpg"
+DL_SOURCE[0]="http://upload.wikimedia.org/wikipedia/en/c/c5/TP-Link_logo.jpg"
+
+DL_FILE[1]="TL-WN721N_100629.zip"
+DL_SOURCE[1]="http://www.tp-link.com.de/resources/software/TL-WN721N_100629.zip"
+DL_ARCH[1]="X86"
+
+DL_DOWNLOADER[1]="wget"
+DL_EXTRACT_FORMAT[1]="7zip"
+
+# File array index for the image showing while installing the program
+ICON_DL_INDEX=0
+
+WINST_NAME[0]="Drv_Dir"
+WINST_VALUE[0]="@DL_EXTRACT_WINST_PATH[1]@\\"

builder-targets-cb.sh

@@ -0,0 +1,25 @@
+##############################################################################
+# This optional file "builder-targets-cb.sh" will be called by builder.sh 
+# 
+# The targets will be called from thde opsi-builder using the following
+# order: config, prepare, retrieve, create, package, publish, commit, cleanup 
+# You can overwrite the target functions in builder-targets-cb.sh
+# 
+# You can define callback functions. The functions are called from
+# opsi-builder within processing a target
+#   cb_package_makeproductfile
+#
+# You can use every variable defined in any configuration file or by
+# the defined builder script itself. Also, calling the predefined
+# targets builder_<targetname> is possible.
+#
+# Abstract:
+#  target order: config, prepare, retrieve, create, package, publish, commit, cleanup
+#  callbacks: <none>
+#
+##############################################################################
+
+function cleanup() {
+    echo "Cleanup"
+    builder_cleanup
+}

openvpn.png.sha1sum

@@ -0,0 +1 @@
+1e55e6d56fd54b044fedb5863e1693e812b776fe  /home/dtrinks/.opsi-dist-cache/tp-link.com/sp-tl-wn721n/1//openvpn.png

tp-link.jpg.sha1sum

@@ -0,0 +1 @@
+77e45777f7a65af5dc36ae525ed126073ce8f5c9  /home/dtrinks/.opsi-dist-cache/tp-link.com/sp-tl-wn721n/1//tp-link.jpg