3DM2™ Online Help

Table of Contents Previous Next Index


Maintaining Your Controller > Updating the Firmware and Driver
Updating the Firmware and Driver
 
* 
Important: Updating the firmware can render the device driver and/or management tools incompatible. Before you update the firmware on your controller, please follow these recommendations:
1) Back up your data.
2) Make sure you have a copy of the current firmware image so that you can roll back to it, if necessary.
3) Close all applications.
This section details several ways to update the firmware and driver for the 3ware RAID controller, depending upon operating system.
Before starting the update of either driver or firmware, you will want to make sure you have the latest files. For details, see Downloading the Driver and Firmware.
To update the firmware
*
The 3ware CD contains a bootable DOS firmware update program that will work for most PC-based systems. See Updating the Firmware Through DOS Using the 3ware Bootable CD.
You can download the latest version of the CD from:
http://www.lsi.com/channel/ChannelDownloads.
*
All supported operating systems can update the firmware through 3DM2. For details, see Updating the Firmware Through 3DM2.
*
All supported operating systems can update the firmware through CLI. For details, see 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2.
To update the driver
For details about updating the driver, refer to Appendix B, “Driver and Software Installation,” in the 3ware SATA+SAS RAID Controller Card Software Users Guide, Version 10.02.
Table of Contents Previous Next Index
LSI Corporation

Copyright LSI 2004-2010
To contact Support, go to http://www.lsi.com/channel/ContactUs