Compare commits

...

No commits in common. "pristine-tar" and "master" have entirely different histories.

83 changed files with 7304 additions and 11 deletions

BIN
amd64/1.04/arcconf Executable file

Binary file not shown.

BIN
amd64/1.05/arcconf Executable file

Binary file not shown.

BIN
amd64/1.06/arcconf Executable file

Binary file not shown.

BIN
amd64/1.07/arcconf Executable file

Binary file not shown.

292
amd64/1.08/License.txt Normal file
View File

@ -0,0 +1,292 @@
International License Agreement for Non-Warranted Programs
Part 1 - General Terms
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE PROGRAM.
Adaptec WILL LICENSE THE PROGRAM TO YOU ONLY IF YOU FIRST ACCEPT THE
TERMS OF THIS AGREEMENT. BY USING THE PROGRAM YOU AGREE TO THESE
TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,
PROMPTLY RETURN THE UNUSED PROGRAM TO THE PARTY (EITHER Adaptec OR
ITS RESELLER) FROM WHOM YOU ACQUIRED IT TO RECEIVE A REFUND OF
THE AMOUNT YOU PAID.
The Program is owned by (Adaptec) or a supplier of Adaptec
and is copyrighted and licensed, not sold.
The term "Program" means the original program and all whole or
partial copies of it. A Program consists of machine-readable
instructions, its components, data, audio-visual content (such
as images, text, recordings, or pictures), and related licensed
materials.
This Agreement includes Part 1 - General Terms and Part 2
Country unique Terms and is the complete agreement regarding the
use of this Program, and replaces any prior oral or written
communications between you and Adaptec. The terms of Part 2 may
replace or modify those of Part 1.
1. License
Use of the Program
Adaptec grants you a nonexclusive license to use the Program.
You may 1) use the Program to the extent of authorizations you
have acquired and 2) make and install copies to support the
level of use authorized, providing you reproduce the copyright
notice and any other legends of ownership on each copy, or
partial copy, of the Program.
If you acquire this Program as a program upgrade, your
authorization to use the Program from which you upgraded is
terminated.
You will ensure that anyone who uses the Program does so only in
compliance with the terms of this Agreement.
You may not 1) use, copy, modify, or distribute the Program
except as provided in this Agreement; 2) reverse assemble,
reverse compile, or otherwise translate the Program except as
specifically permitted by law without the possibility of
contractual waiver; or 3) sublicense, rent, or lease the
Program.
Transfer of Rights and Obligations
You may transfer all your license rights and obligations under a
Proof of Entitlement for the Program to another party by
transferring the Proof of Entitlement and a copy of this
Agreement and all documentation. The transfer of your license
rights and obligations terminates your authorization to use the
Program under the Proof of Entitlement.
2. Proof of Entitlement
The Proof of Entitlement for this Program is evidence of your
authorization to use this Program and of your eligibility for
future upgrade program prices (if announced) and potential
special or promotional opportunities.
3. Charges and Taxes
Adaptec defines use for the Program for charging purposes and
specifies it in the Proof of Entitlement. Charges are based on
extent of use authorized. If you wish to increase the extent of
use, notify Adaptec or its reseller and pay any applicable charges.
Adaptec does not give refunds or credits for charges already due or
paid.
If any authority imposes a duty, tax, levy or fee, excluding
those based on Adaptec's net income, upon the Program supplied by
Adaptec under this agreement, then you agree to pay that amount
as Adaptec specifies or
supply exemption documentation.
4. No Warranty
SUBJECT TO ANY STATUTORY WARRANTIES WHICH CAN NOT BE EXCLUDED,
Adaptec MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE WARRANTY OF NON-INFRINGEMENT
AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE PROGRAM OR TECHNICAL SUPPORT,
IF ANY. Adaptec MAKES NO WARRANTY REGARDING THE CAPABILITY OF THE
PROGRAM TO CORRECTLY PROCESS, PROVIDE AND/OR RECEIVE DATE DATA
WITHIN AND BETWEEN THE 20TH AND 21ST CENTURIES.
The exclusion also applies to any of Adaptec's subcontractors,
suppliers, or program developers (collectively called
"Suppliers").
Manufacturers, suppliers, or publishers of non-Adaptec Programs may
provide their own warranties.
5. Limitation of Liability
NEITHER Adaptec NOR ITS SUPPLIERS WILL BE LIABLE FOR ANY DIRECT OR
INDIRECT
DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
SAVINGS, OR ANY INCIDENTAL, SPECIAL, OR OTHER ECONOMIC
CONSEQUENTIAL DAMAGES, EVEN IF Adaptec IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
6. General
Nothing in this Agreement affects any statutory rights of
consumers that cannot be waived or limited by contract.
Adaptec may terminate your license if you fail to comply with the
terms of this Agreement. If Adaptec does so, you must immediately
destroy the Program and all copies you made of it.
You agree to comply with applicable export laws and regulations.
Neither you nor Adaptec will bring a legal action under this
Agreement more than two years after the cause of action arose
unless otherwise provided by local law without the possibility
of contractual waiver or limitation.
Neither you nor Adaptec is responsible for failure to fulfill any
obligations due to causes beyond its control.
Adaptec does not provide program services or technical support,
unless Adaptec specifies otherwise.
The laws of the country in which you acquire the Program govern
this Agreement, except 1) in Australia, the laws of the State or
Territory in which the transaction is performed govern this
Agreement; 2) in Albania, Armenia, Belarus, Bosnia/Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan,
Kirghizia, Former Yugoslav Republic of Macedonia
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic,
Slovenia, Ukraine, and Federal Republic of Yugoslavia, the laws
of Austria govern this Agreement; 3) in the United Kingdom, all
disputes relating to this Agreement will be governed by English
Law and will be submitted to the exclusive jurisdiction of the
English courts; 4) in Canada, the laws in the Province of
Ontario govern this Agreement; and 5) in the United States and
Puerto Rico, and People's Republic of China, the laws of the
State of New York govern this Agreement.
Part 2 - Country-unique Terms
AUSTRALIA:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Trade Practices Act 1974 or other
legislation and are only limited to the extent permitted by the
applicable legislation.
Limitation of Liability (Section 3):
The following paragraph is added to this Section:
Where Adaptec is in breach of a condition or warranty implied by the
Trade Practices Act 1974, Adaptec's liability is limited to the
repair or replacement of the goods, or the supply of equivalent
goods. Where that condition or warranty relates to right to
sell, quiet possession or clear title, or the goods are of a
kind ordinarily acquired for personal, domestic or household use
or consumption, then none of the limitations in this paragraph
apply.
GERMANY:
No Warranty (Section 4):
The following paragraphs are added to this Section:
The minimum warranty period for Programs is six months.
In case a Program is delivered without Specifications, we will
only warrant that the Program information correctly describes
the Program and that the Program can be used according to the
Program information. You have to check the usability according
to the Program information within the "money-back guaranty"
period.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
The limitations and exclusions specified in the Agreement will
not apply to damages caused by Adaptec with fraud or gross
negligence, and for express warranty.
INDIA:
General (Section 6):
The following replaces the fourth paragraph of this Section:
If no suit or other legal action is brought, within two years
after the cause of action arose, in respect of any claim that
either party may have against the other, the rights of the
concerned party in respect of such claim will be forfeited and
the other party will stand released from its obligations in
respect of such claim.
IRELAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Except as expressly provided in these terms and conditions, all
statutory conditions, including all warranties implied, but
without prejudice to the generality of the foregoing, all
warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
ITALY:
Limitation of Liability (Section 5):
This Section is replaced by the following:
Unless otherwise provided by mandatory law, Adaptec is not liable
for any damages which might arise.
NEW ZEALAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Consumer Guarantees Act 1993 or
other legislation which cannot be excluded or limited. The
Consumer Guarantees Act 1993 will not apply in respect of any
goods or services which Adaptec provides, if you require the goods
and services for the purposes of a business as defined in that
Act.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
Where Programs are not acquired for the purposes of a business
as defined in the Consumer Guarantees Act 1993, the limitations
in this Section are subject to the limitations in that Act.
PEOPLE'S REPUBLIC OF CHINA:
Charges (Section 3):
The following paragraph is added to the Section:
All banking charges incurred in the People's Republic of China
will be borne by you and those incurred outside the People's
Republic of China will be borne by Adaptec.
UNITED KINGDOM:
Limitation of Liability (Section 5):
The following paragraph is added to this Section at the end of
the first paragraph:
The limitation of liability will not apply to any breach of
Adaptec's obligations implied by Section 12 of the Sales of Goods
Act 1979 or Section 2 of the Supply of Goods and Services Act
1982.
UNITED STATES AND CANADA:
No Country-unique Terms apply.
By continuing with the installation of the Program, you are
accepting the terms and conditions above.

693
amd64/1.08/README.TXT Normal file
View File

@ -0,0 +1,693 @@
README.TXT
Adaptec maxView Storage Manager
Adaptec Command Line Interface Utility (ARCCONF)
as of May 19, 2015
--------------------------------------------------------------------
Please review this file for important information about issues
and errata that were discovered after completion of the standard
product documentation. In the case of conflict between various
parts of the documentation set, this file contains the most
current information.
The following information is available in this file:
1. New Features in this Release
2. Software Versions and Documentation
2.1 Utility Software
2.2 Documentation
3. Installation and Setup
3.1 Installation Instructions
3.2 Supported Operating Systems
3.3 General Setup Notes
3.4 Remote Access
3.5 Windows 8 Setup
3.6 SLES Setup
3.7 Ubuntu Setup
3.8 Bootable USB Image Security Warnings
3.9 RAW Device Setup
3.10 maxView Plugin for VMware vSphere Web Client
3.11 Firmware Downgrade on Series 8 Board Revision "B1"
3.12 Uninstallation Issues
4. Known Limitations
4.1 Login Issues on Windows Domain Server
4.2 Hot Spare Issues
4.3 Dual-Controller Systems
4.4 Email Notifications
4.5 SGPIO Enclosures
4.6 Non-RAID Mode Controllers
4.7 RAID-Level Migrations
4.8 maxCache Device Migration
4.9 ARCCONF maxCache Device Size Issue
4.10 Browser Issues
4.11 Remote System Issues
4.12 Power Management Issues
4.13 RAID 50/RAID 60, Max Drives
4.14 RAID 10 Segment Order
4.15 RAID 10 Rebuild Order
4.16 Verify with Fix
4.17 Locate Logical Drive Blink LED
4.18 ATA Secure Erase
4.19 ARCCONF Backward Compatibility
4.20 Adaptec Series 6 Controller Issues
4.21 Simple Volume Support
4.22 Auto-Volume Support
4.23 Hot-Removing Disk Drives on Xenserver Guest OS
4.24 Updating Hard Disk Firmware on VMware Guest OS
4.25 Creating a Support Archive on a Guest OS
4.26 Enclosure Status Reporting
4.27 PHY Status on Enclosure Backplanes
4.28 Special Characters in Logical Device Names
4.29 Speaker Status on SuperMicro SAS2X28 Enclosures
4.30 Changing Read and Write Cache Settings for a Logical Drive
4.31 Online Help Issues
--------------------------------------------------------------------
1. New Features in this Release
o Support for new operating systems
o Support for HDD/SSD temperature monitoring
o Improved SMART error logging for SAS and SATA devices
o Basecode logs and Flash Backup Module hard error logs included in support archive
o Enhanced maxView SMTP mail client to comply with highly secured SMTP servers (Gmail, Yahoo, etc)
o Open Pegasus 2.13 (maxView CIM Server) upgrade
o Re-design of maxView schedule dialog with advanced Primefaces calendar component
o Multi-level authentication and access privileges in maxView (Administrator/Standard user)
o Installer change: install GUI, Agent and CIM Server as separate components (saves 500MB RAM space, typical)
o Global Init/Uninit Physical Devices wizard
o Global Delete Logical Devices wizard
o Misc UI enhancements:
- Logical drive property tab shows initialization method
- Physical device temperature added to physical drive information
- Logical device long running task navigation from tree node to Tab to Task dialog
o ARCCONF changes:
- New commands: backupunit, driverupdate, setcustommode, setconnectormode
- Enhanced commands: identify command supports blink LED start/stop
o Bugfixes
--------------------------------------------------------------------
2. Software Versions and Documentation
2.1 Utility Software
o Adaptec maxView Storage Manager Version 1.08
o Adaptec ARCCONF Command Line Interface Utility Version 1.08
2.2 Documentation
PDF Format (English/Japanese):
o maxView Storage Manager User's Guide
o Adaptec RAID Controller Command Line Utility User's Guide
HTML and Text Format:
o maxView Storage Manager Online Help
o maxView Storage Manager README.TXT file
--------------------------------------------------------------------
3. Installation and Setup
3.1 Installation Instructions
The Adaptec SAS RAID Controllers Installation and User's Guide
contains complete installation information for the controllers
and drivers. The Adaptec RAID Controllers Command Line Utility
User's Guide contains complete installation information for
ARCCONF. The maxView Storage Manager User's Guide contains
complete installation information for the maxView Storage
Manager software.
3.2 Supported Operating Systems
Microsoft Windows:
o Windows Server 2012 R2, 64-bit
o Windows Server 2008, 32-bit and 64-bit
o Windows Server 2008 R2, 64-bit
o Windows SBS 2011, 64-bit
o Windows 7, 32-bit and 64-bit
o Windows 8, Windows 8.1, 32-bit and 64-bit
Linux:
o Red Hat Enterprise Linux 7.1, 64-bit
o Red Hat Enterprise Linux 6.6, 5.11, 32-bit and 64-bit
o SuSE Linux Enterprise Server 12, 64 bit
o SuSE Linux Enterprise Server 11, 10*, 32-bit and 64-bit
o Debian Linux 7.8, 32-bit and 64-bit
o Ubuntu Linux 14.10, 14.04.1, 12.04.3, 32-bit and 64-bit
o Fedora Linux 21, 32-bit and 64-bit
o CentOS 7.1, 64 bit
o CentOS 6.6, 5.11, 32-bit and 64-bit
*See Section 3.6 for SLES 10 setup issues
Virtual OS Environments:
o VMware ESXi 6.0, VMware ESXi 5.5
o Citrix XenServer 6.5 (32-bit GOS only)
Solaris:
o Solaris 10 U11
o Solaris 11.2
3.3 General Setup Notes
o maxView Storage Manager supports Adaptec Series 8, Adaptec
Series 7, and Adaptec Series 6 controllers. It is not backward
compatible with older Adaptec controller models.
o maxView Storage Manager is not supported on FreeBSD. Use
ARCCONF to create and manage arrays.
o maxView Storage Manager and legacy Adaptec Storage Manager (ASM)
cannot coexist on the same system.
3.4 Remote Access
maxView Storage Manager requires the following range of ports
to be open for remote access:
o 34570-34580 (TCP)
o 34570 (UDP)
o 34577-34580 (UDP)
See also Section 4.12 for OS-specific issues and workarounds.
3.5 Windows 8 Setup
To log in and use maxView Storage Manager on a Windows 8 system,
you must create a local user account; you cannot use your
MS Live account. To create a local user account:
1. Log into your MS Live account.
2. Select Settings->Change PC Settings->Users->Switch to Local user.
3. Provide account details.
4. Start maxView Storage Manager and log in with your local user
account credentials.
3.6 SLES Setup
o Due to a JRE conflict, maxView Storage Manager is not
supported on SLES 10 SP2/SP3 (x32, x64), and SLES 10 SP4 (x32).
WORKAROUND: Install SLES 10 SP4 64-bit then replace the 64-bit
JRE with a 32-bit JRE. Alternatively, use ARCCONF for storage
management on SLES 10 systems.
o To avoid a problem with launching maxView Storage Manager on
SLES 11 x64 systems with DHCP enabled, ensure that the
/etc/hosts file maps the server IP address to a valid host
name; it is not sufficient to map the IP address to 'localhost'.
3.7 Ubuntu Setup
o To avoid a maxView Login failure on Ubuntu systems, you must
ensure that the root user account is enabled. (It is disabled,
by default, on Ubuntu 14.04 and later because no password is set.)
For example: sudo bash; sudo passwd root
o When upgrading maxView Storage Manager on an existing Ubuntu
Linux x64 installation, you must enable the upgrade switch
before installing the maxView .deb package:
export maxView_Upgrade=true
dpkg -i StorMan-*.deb
To uninstall maxView after the upgrade:
export maxView_Upgrade=false
dpkg -r storman
3.8 Bootable USB Image Security Warnings
When running maxView Storage Manager from the bootable USB
image, you may be prompted with one or more with security
warnings before maxView launches. In each case, acknowledge
the warning and continue.
3.9 RAW Device Setup
On Adaptec Series 7 and Adaptec Series 8 controllers, a RAW
Pass Through device is analogous to a JBOD, supported by Adaptec
Series 6 controllers and older. Any drive without Adaptec RAID
metadata is exposed to the OS as a RAW Pass Through device. To
remove the Adaptec metadata and convert the drive to a RAW device,
use the Uninitialize command in maxView Storage Manager; any
existing data on the drive is destroyed. (You can also run
uninit from the BIOS or ARCCONF.) For more information about
working with RAW devices, see 'controller modes' in the CLI
User's Guide, and BIOS 'general settings' in the RAID Controller
Installation and User's Guide.
3.10 maxView Plugin for VMware vSphere Web Client
The maxView Plugin for VMware vSphere Web Client is supported
on VMware 5.5 only.
3.11 Firmware Downgrade on Series 8 Board Revision "B1"
Firmware downgrade from maxView Storage Manager, ARCCONF or the
BIOS is not supported on Adaptec Series 8 RAID controllers with
Board Revision "B1" (the newest board revision). Older firmware
versions do not support Board Revision "B1".
3.12 Uninstallation Issues
o When uninstalling maxView Storage Manager on Fedora Linux,
the OS displays a series of warning messages about missing
files. These messages can be ignored; the uninstallation
completes successfully.
WORKAROUND: To avoid the warnings, uninstall maxView with
'./StorMan-1.06-21032.i386.bin --remove' rather than
'rpm -e StorMan'.
o When using the 'Modify' option to uninstall maxView Storage
Manager on Windows, the 'Adaptec' folder is not removed from
the file system.
--------------------------------------------------------------------
4. Known Limitations
4.1 Login Issues on Windows Domain Server
If the maxView login account doesn't have local administrative
rights, login will fail with an error message: 'Invalid Username
or Password'. On domain servers running later versions of Microsoft
Windows Server, where no local administrator exists or can be
created, maxView login is not possible. Use ARCCONF to create
and manage arrays.
4.2 Hot Spare Issues
o After using a global hot spare to rebuild a redundant logical
drive, maxView Storage Manager displays an erroneous event
message: "Deleted dedicated hot spare drive for logical device".
In fact, the message should read "Logical device X is no longer
protected by hot spare drive Y".
o maxView Storage Manager allows you to un-assign a global hot
spare drive while copyback is in progess. This procedure is
not recommended.
4.3 Dual-Controller Systems
In dual-controller systems, the controller order in maxView
Storage Manager and the BIOS differs. Example: with an
Adaptec 72405 and 7805 installed, the BIOS reports
the 72405 as controller 1 and the 7805 as controller 2;
in the GUI, the controller order is reversed.
4.4 Email Notifications
o On Linux systems, we recommend adding the SMTP host name
to the /etc/hosts file. Doing so ensures that email
notifications will succeed if you specify the email
server in maxView Storage Manager by host name. Otherwise,
email notifications (including test messages) may fail if
the DNS is unable to resolve the host hame.
WORKAROUND: specify the email server in maxView Storage
Manager by IP address.
o On CentOS 5.9 x64, email notifications may not be sent for
logical drive creations, degraded logical drives, or logical
drives that are rebuilding or fully rebuilt.
4.5 SGPIO Enclosures
In this release, maxView Storage Manager does not show connector
information for SGPIO enclosures.
4.6 Non-RAID Mode Controllers
maxView Storage Manager can "see" RAID controllers operating
in HBA mode, Auto-Volume mode, and Simple Volume mode (Adaptec
Series 7 and Adaptec Series 8 controllers only). However, to
change the controller mode, you must use ARCCONF or the BIOS.
4.7 RAID-Level Migrations
o The following RAID-level migrations (RLM) are supported in
this release:
RAID 0 to RAID 5
RAID 0 to RAID 10
RAID 5 to RAID 6
RAID 6 to RAID 5
RAID 10 to RAID 5
RAID 5 to RAID 10
RAID 1 to RAID 5
SIMPLE VOLUME to RAID 1
RAID 1 to SIMPLE VOLUME
o When migrating a Simple Volume to RAID 1, maxView Storage
Manager reports the logical drive state as Impacted (rather
than Reconfiguring); this is normal.
o We do not recommend performing a RAID-level migration or
Online Capacity Expansion (OCE) on a logical drive with
maxCache SSD caching enabled.
NOTE: maxView Storage Manager grays out the options for logical
drives with maxCache enabled. ARCCONF terminates the task.
o Always allow a RAID-level migration to complete before creating
a support archive file. Otherwise, the support archive will
include incorrect partition information. Once the migration is
complete, the partition information will be reported correctly.
4.8 maxCache Device Migration
Only one maxCache Device is supported per controller. Moving
the maxCache Device (all underlying SSDs) from one
controller to another (assuming both controllers support
maxCache) is supported only if (1) the new controller does not
have a maxCache Device or any other maxCache Device with a
conflicting device number and (2) only after a clean shutdown
on the old controller.
4.9 ARCCONF maxCache Device Size Issue
ARCCONF supports >2TB maxCache Devices if you create the
device with the 'max' parameter. However, the functional
limit for the maxCache Device is 2TB, which is also the
limit in maxView Storage Manager.
4.10 Browser Issues
o To run maxView Storage Manager on the supported browsers,
Javascript must be enabled.
o Due to a certificate bug in Firefox 31.x, maxView login
may fail on RHEL systems with a "Secure Connection" error.
(Firefox 31.1 is the default browser on RHEL 6.6; on
RHEL 7.1, it is 31.4.)
WORKAROUND: Upgrade to Firefox 36.
o With the default Security setting in Microsoft Internet
Explorer 10 and 11, you may be unable to login to maxView
Storage Manager or experience certain GUI display issues
in the maxView online Help system.
WORKAROUND: Change the default Security setting from High
(or Medium-High) to Medium. Alternative: add the GUI IP
address to the trusted sites list.
o With Google Chrome, the scrollbar resets itself to the top
after selecting a drive in the Logical Drive wizard. To
select another drive, you must scroll back down to the
drive location.
o With Microsoft Internet Explorer 10, the controller
firmware update wizard does not show the f/w update
file name when the upload completes. To refresh the
display, click Next then Back.
o We do not recommend using multiple browsers simultaneously
on the same maxView instance. Doing so may cause display
issues or freezes; to restore maxView, refresh the
display by pressing F5.
4.11 Remote System Access on Linux and Windows
To avoid remote system access failures from Linux and Windows
clients running maxView Storage Manager, check and update one
or all of the following system and network settings:
Windows:
o Ensure that the DNS server information is properly configured
RHEL/Linux:
o Set server.properties file permissions to at least read-only at all levels
1. Stop all maxView services.
2. Set the Permissions of server.properties file to read and write or read-only
at all levels (Owner, Group and Others). Apply and close.
3. Restart all services in the given order - cim, agent, tomcat
4. Now try to remote login to this system from any other system
o Check/update these network settings:
1. Disable SELinux
2. Disable firewall.
3. Disable the ipv6 in the system, if ipconfig shows both ipv4 and ipv6 address.
4. Remove the virtual bridge virbr0, if present
5. Enter local ip address in 'localip' parameter in server.properties file
4.12 Power Management Issues
o Power management is not supported on FreeBSD.
o Capturing support logs from maxView or ARCCONF will spin up
drives when power management is active. This behavior is by design.
o For logical drives comprised of SSDs only, the Power Tab in
maxView Storage Manager is disabled.
o The Logical Drive Creation wizard does not save the power
management settings after the logical drive is created.
It is always disabled.
WORKAROUND: Enable power management for the logical drive
from the Set Properties window.
4.13 RAID 50/RAID 60, Max Drives
The maximum number of drives in a RAID 50 or RAID 60 differ
between maxView Storage Manager, ARCCONF, and the BIOS:
o BIOS and ARCCONF: 128 drives max
RAID 50 - From 2-16 legs with 3-32 drives/leg
RAID 60 - From 2-16 legs with 4-16 drives/leg
o maxView Storage Manager:
Assumes 2 legs for RAID 50/RAID 60 (non-selectable)
RAID 50 2-32 drives/leg (64 total)
RAID 60 2-16 drives/leg (32 total)
4.14 RAID 10 Segment Order
maxView Storage Manager and the Ctrl-A BIOS report the wrong
segment order for RAID 10s, regardless of the order in which
the drives are selected.
Example 1: Create RAID 10 with 2 SDDs and 2 HDDs in maxView Storage Manager:
(1a) ARCCONF and maxView Storage Manager see the following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
Device 0 (H1)
(1b) the BIOS/CTRL-A sees the following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 0 (H1)
Device 3 (S2)
(1c) the correct and expected RAID segment order is:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
Example 2: Create RAID 10 with 2 SDDs and 2 HDDs with ARCCONF:
(2a) the BIOS/CTRL-A sees the following RAID segment order:
Device 0 (H1)
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
(2b) ARCCONF and maxView Storage Manager see the correct RAID segment order:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
4.15 RAID 10 Rebuild Order
With a degraded RAID 10 logical drive, the drive is rebuilt
one leg at a time, not in parallel.
4.16 Verify with Fix
In maxView Storage Manager and ARCCONF, the Verify with Fix
operation is NOT available when:
1. The logical drive has a non-redundant RAID level
2. Other tasks are in progress on the logical drive
3. The logical drive is in a non-optimal or impacted state
4.17 Locate Logical Drive Blink LED
In maxView Storage Manager, Locate Logical Drive continues to
blink the LED for a pulled physical drive in the array after
the locate action is stopped. (For unpulled drives, the blinking
stops.) This issue is not seen with ARCCONF.
4.18 ATA Secure Erase
In ARCCONF, the ATA Secure Erase operation cannot be aborted.
Once started, it continues to completion.
NOTE: ATA Secure Erase is also available in the Ctrl-A BIOS.
and maxView Storage Manager.
4.19 ARCCONF Backward Compatibility
ARCCONF is backward compatible with older Adaptec controller
models. As a result, the ARCCONF user's guide and online help
show command options that are not supported by newer Adaptec
controllers, like the Adaptec Series 7 and Adaptec Series 8.
Example:
o With ARCCONF SETMAXCACHE, Adaptec Series 7 and Series 8
controllers do not support ADDTOPOOL or REMOVEFROMPOOL
4.20 Adaptec Series 6 Controller Issues
The following issues are seen only with Adaptec Series 6 RAID
controllers:
o In maxView Storage Manager, the Preserve Cache option on the
Set Properties window is not supported on Series 6 RAID
controllers. Attempting to set this option for the Series 6
controller fails.
o Renaming a RAID volume disables the write-cache (if enabled).
You cannot re-enable the write-cache in maxView Storage Manager.
WORKAROUND: Use ARCCONF to enable the write-cache.
o In a VMware Guest OS under VMware 5.x, maxView Storage Manager
and ARCCONF do not detect existing logical drive partitions.
As a result, attempting to delete, clear, or erase the logical
drive may fail.
o On Series 6 controllers, maxView Storage Manager deletes
partitioned JBODs without issuing a warning message.
o Series 6 controllers do not support the ARCCONF GETPERFORM command.
4.21 Simple Volume Support
o In this release, you can create a maximum of 128 Simple
Volumes in maxView Storage Manager, ARCCONF, or the BIOS.
o When a Simple Volume fails, the status remains unchanged
after drive replacement.
WORKAROUND: Manually delete the Simple Volume to remove it.
4.22 Auto-Volume Support
o Changing a controller into Auto-Volume mode (ARCCONF/BIOS) is not
supported if the configuration includes any logical device type
other than Simple Volume, including a maxCache Device. The mode
switch from RAID mode to Auto-Volume mode is blocked if any other
type of logical volume exists (including maxCache). After
switching to Auto-Volume mode, you can create and delete Simple
Volumes only in maxView Storage Manager and ARCCONF.
o In Auto-Volume mode, only the first 128 RAW drives are converted
to Simple Volumes; the rest of the RAW drives remain unchanged.
If you uninitialize a Ready drive while the controller is in
Auto-Volume mode, the firmware converts the drive automatically
until the Simple Volume count reaches the maximum.
4.23 Hot-Removing Disk Drives on Xenserver Guest OS
XenServer does not support "hot-removal" of disk drives from a
partitioned logical drive. As a result, if you hot remove a disk
from a logical drive, the Guest OS becomes inaccessible because
the drive partition remains visible to the OS instead of being
cleared.
WORKAROUND: Reboot the XenServer host, detach the failed
partition, then restart the VM.
4.24 Updating Hard Disk Firmware on VMware Guest OS
Updating the firmware for a SAS hard disk drive with ARCCONF/maxView
can crash (PSOD) the VMware Guest OS. This issue is seen with SAS
hard drives only; with SATA drives, the firmware update completes
successfully.
4.25 Creating a Support Archive on a Guest OS
To create a support archive on a VMware or Xenserver Guest OS,
use maxView Storage Manager only. Creating a support archive
with ARCCONF is not supported in this release.
4.26 Enclosure Status Reporting
Enclosure status, in maxView Storage Manager, is event-driven.
As a result, enclosures can have a "Degraded" status even if
related resources (fan, temperature, power) are performing
normally (Optimal status). For instance, the Enclosure status
changes to "Degraded" if the system reports an "Enclosure device
not responding ..." event, even if other sensor values are normal.
4.27 PHY Status on Enclosure Backplanes
In the Controller Properties window, maxView Storage Manager shows
the Connector Info as "unknown" for all PHYs on an enclosure-based
backplane (for instance, a backplane attached to connector 1).
4.28 Special Characters in Logical Device Names
Special characters are permitted in logical device names
in maxView Storage Manager, the BIOS, and ARCCONF. However,
with Linux ARCCONF (create, setname), special characters
must be "escaped" to ensure proper interpretation. For
example:
ARCCONF SETNAME 1 LOGICALDRIVE 1 arc_ldrive%\$12\&
4.29 Speaker Status on SuperMicro SAS2X28 Enclosures
SuperMicro SAS2X28 enclosures do not propagate the speaker
status to maxView Storage Manager. As a result, maxView
always displays the speaker status as Off.
4.30 Changing Read and Write Cache Settings for a Logical Drive
maxView Storage Manager does not allow you to change the
read-cache and write-cache settings for a logical drive in
one step. You must click OK after each change.
4.31 Online Help Issues
When opening the maxView Storage Manager help from a remote
Linux system (eg, over a VPN), the help window may fail to
open with a 'can't establish connection to server' message.
WORKAROUND: replace 127.0.0.1:8443 in the URL with <system_ip_address>:8443
--------------------------------------------------------------------
(c) 2015 PMC-Sierra, Inc. All Rights Reserved.
This software is protected under international copyright laws and
treaties. It may only be used in accordance with the terms
of its accompanying license agreement.
The information in this document is proprietary and confidential to
PMC-Sierra, Inc., and for its customers' internal use. In any event,
no part of this document may be reproduced or redistributed in any
form without the express written consent of PMC-Sierra, Inc.,
1380 Bordeaux Drive, Sunnyvale, CA 94089.
P/N DOC-01768-05-A Rev A

BIN
amd64/1.08/arcconf Executable file

Binary file not shown.

BIN
amd64/2.00/arcconf Executable file

Binary file not shown.

292
amd64/2.01/License.txt Normal file
View File

@ -0,0 +1,292 @@
International License Agreement for Non-Warranted Programs
Part 1 - General Terms
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE PROGRAM.
Adaptec WILL LICENSE THE PROGRAM TO YOU ONLY IF YOU FIRST ACCEPT THE
TERMS OF THIS AGREEMENT. BY USING THE PROGRAM YOU AGREE TO THESE
TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,
PROMPTLY RETURN THE UNUSED PROGRAM TO THE PARTY (EITHER Adaptec OR
ITS RESELLER) FROM WHOM YOU ACQUIRED IT TO RECEIVE A REFUND OF
THE AMOUNT YOU PAID.
The Program is owned by (Adaptec) or a supplier of Adaptec
and is copyrighted and licensed, not sold.
The term "Program" means the original program and all whole or
partial copies of it. A Program consists of machine-readable
instructions, its components, data, audio-visual content (such
as images, text, recordings, or pictures), and related licensed
materials.
This Agreement includes Part 1 - General Terms and Part 2
Country unique Terms and is the complete agreement regarding the
use of this Program, and replaces any prior oral or written
communications between you and Adaptec. The terms of Part 2 may
replace or modify those of Part 1.
1. License
Use of the Program
Adaptec grants you a nonexclusive license to use the Program.
You may 1) use the Program to the extent of authorizations you
have acquired and 2) make and install copies to support the
level of use authorized, providing you reproduce the copyright
notice and any other legends of ownership on each copy, or
partial copy, of the Program.
If you acquire this Program as a program upgrade, your
authorization to use the Program from which you upgraded is
terminated.
You will ensure that anyone who uses the Program does so only in
compliance with the terms of this Agreement.
You may not 1) use, copy, modify, or distribute the Program
except as provided in this Agreement; 2) reverse assemble,
reverse compile, or otherwise translate the Program except as
specifically permitted by law without the possibility of
contractual waiver; or 3) sublicense, rent, or lease the
Program.
Transfer of Rights and Obligations
You may transfer all your license rights and obligations under a
Proof of Entitlement for the Program to another party by
transferring the Proof of Entitlement and a copy of this
Agreement and all documentation. The transfer of your license
rights and obligations terminates your authorization to use the
Program under the Proof of Entitlement.
2. Proof of Entitlement
The Proof of Entitlement for this Program is evidence of your
authorization to use this Program and of your eligibility for
future upgrade program prices (if announced) and potential
special or promotional opportunities.
3. Charges and Taxes
Adaptec defines use for the Program for charging purposes and
specifies it in the Proof of Entitlement. Charges are based on
extent of use authorized. If you wish to increase the extent of
use, notify Adaptec or its reseller and pay any applicable charges.
Adaptec does not give refunds or credits for charges already due or
paid.
If any authority imposes a duty, tax, levy or fee, excluding
those based on Adaptec's net income, upon the Program supplied by
Adaptec under this agreement, then you agree to pay that amount
as Adaptec specifies or
supply exemption documentation.
4. No Warranty
SUBJECT TO ANY STATUTORY WARRANTIES WHICH CAN NOT BE EXCLUDED,
Adaptec MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE WARRANTY OF NON-INFRINGEMENT
AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE PROGRAM OR TECHNICAL SUPPORT,
IF ANY. Adaptec MAKES NO WARRANTY REGARDING THE CAPABILITY OF THE
PROGRAM TO CORRECTLY PROCESS, PROVIDE AND/OR RECEIVE DATE DATA
WITHIN AND BETWEEN THE 20TH AND 21ST CENTURIES.
The exclusion also applies to any of Adaptec's subcontractors,
suppliers, or program developers (collectively called
"Suppliers").
Manufacturers, suppliers, or publishers of non-Adaptec Programs may
provide their own warranties.
5. Limitation of Liability
NEITHER Adaptec NOR ITS SUPPLIERS WILL BE LIABLE FOR ANY DIRECT OR
INDIRECT
DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
SAVINGS, OR ANY INCIDENTAL, SPECIAL, OR OTHER ECONOMIC
CONSEQUENTIAL DAMAGES, EVEN IF Adaptec IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
6. General
Nothing in this Agreement affects any statutory rights of
consumers that cannot be waived or limited by contract.
Adaptec may terminate your license if you fail to comply with the
terms of this Agreement. If Adaptec does so, you must immediately
destroy the Program and all copies you made of it.
You agree to comply with applicable export laws and regulations.
Neither you nor Adaptec will bring a legal action under this
Agreement more than two years after the cause of action arose
unless otherwise provided by local law without the possibility
of contractual waiver or limitation.
Neither you nor Adaptec is responsible for failure to fulfill any
obligations due to causes beyond its control.
Adaptec does not provide program services or technical support,
unless Adaptec specifies otherwise.
The laws of the country in which you acquire the Program govern
this Agreement, except 1) in Australia, the laws of the State or
Territory in which the transaction is performed govern this
Agreement; 2) in Albania, Armenia, Belarus, Bosnia/Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan,
Kirghizia, Former Yugoslav Republic of Macedonia
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic,
Slovenia, Ukraine, and Federal Republic of Yugoslavia, the laws
of Austria govern this Agreement; 3) in the United Kingdom, all
disputes relating to this Agreement will be governed by English
Law and will be submitted to the exclusive jurisdiction of the
English courts; 4) in Canada, the laws in the Province of
Ontario govern this Agreement; and 5) in the United States and
Puerto Rico, and People's Republic of China, the laws of the
State of New York govern this Agreement.
Part 2 - Country-unique Terms
AUSTRALIA:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Trade Practices Act 1974 or other
legislation and are only limited to the extent permitted by the
applicable legislation.
Limitation of Liability (Section 3):
The following paragraph is added to this Section:
Where Adaptec is in breach of a condition or warranty implied by the
Trade Practices Act 1974, Adaptec's liability is limited to the
repair or replacement of the goods, or the supply of equivalent
goods. Where that condition or warranty relates to right to
sell, quiet possession or clear title, or the goods are of a
kind ordinarily acquired for personal, domestic or household use
or consumption, then none of the limitations in this paragraph
apply.
GERMANY:
No Warranty (Section 4):
The following paragraphs are added to this Section:
The minimum warranty period for Programs is six months.
In case a Program is delivered without Specifications, we will
only warrant that the Program information correctly describes
the Program and that the Program can be used according to the
Program information. You have to check the usability according
to the Program information within the "money-back guaranty"
period.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
The limitations and exclusions specified in the Agreement will
not apply to damages caused by Adaptec with fraud or gross
negligence, and for express warranty.
INDIA:
General (Section 6):
The following replaces the fourth paragraph of this Section:
If no suit or other legal action is brought, within two years
after the cause of action arose, in respect of any claim that
either party may have against the other, the rights of the
concerned party in respect of such claim will be forfeited and
the other party will stand released from its obligations in
respect of such claim.
IRELAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Except as expressly provided in these terms and conditions, all
statutory conditions, including all warranties implied, but
without prejudice to the generality of the foregoing, all
warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
ITALY:
Limitation of Liability (Section 5):
This Section is replaced by the following:
Unless otherwise provided by mandatory law, Adaptec is not liable
for any damages which might arise.
NEW ZEALAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Consumer Guarantees Act 1993 or
other legislation which cannot be excluded or limited. The
Consumer Guarantees Act 1993 will not apply in respect of any
goods or services which Adaptec provides, if you require the goods
and services for the purposes of a business as defined in that
Act.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
Where Programs are not acquired for the purposes of a business
as defined in the Consumer Guarantees Act 1993, the limitations
in this Section are subject to the limitations in that Act.
PEOPLE'S REPUBLIC OF CHINA:
Charges (Section 3):
The following paragraph is added to the Section:
All banking charges incurred in the People's Republic of China
will be borne by you and those incurred outside the People's
Republic of China will be borne by Adaptec.
UNITED KINGDOM:
Limitation of Liability (Section 5):
The following paragraph is added to this Section at the end of
the first paragraph:
The limitation of liability will not apply to any breach of
Adaptec's obligations implied by Section 12 of the Sales of Goods
Act 1979 or Section 2 of the Supply of Goods and Services Act
1982.
UNITED STATES AND CANADA:
No Country-unique Terms apply.
By continuing with the installation of the Program, you are
accepting the terms and conditions above.

819
amd64/2.01/README.TXT Normal file
View File

@ -0,0 +1,819 @@
README.TXT: Adaptec maxView Storage Manager &
ARCCONF Command Line Interface Utility
as of March 22, 2016
--------------------------------------------------------------------
Please check the product website for the later versions of this
file to ensure you are reviewing the latest information. This
file contains important information about issues and errata
that were discovered after completion of the standard
product documentation.
In the case of conflict between various parts of the documentation
set, this file contains the most current information.
Table of Contents
1. New Features of this Release
2. Software Versions and Documentation
2.1. Utility Software
2.2. Documentation
4.2.2.1. Series 6, 7, 8 Controller Documentation
4.2.2.2. HBA 1000 Series Product Documentation
4.2.2.3. SmartIOC Product Documentation
3. Installation Notes
3.1. Installation and Setup
3.2. Supported Operating Systems
3.2.1. Series 6, 7, 8 Controllers
3.2.2. Smart Family Controllers
3.3. General Setup Notes
3.4. Remote Access
3.5. Windows 8 Setup
3.6. SLES Setup
3.7. Ubuntu Setup
3.8. Bootable USB Image Security Warnings
3.9. RAW Device Setup (Series 6, 7, 8 Only)
3.10. maxView Plugin for VMware vSphere Web Client
4. Known Limitations
4.1. Global Limitations
4.1.1. Dual-Controller Systems
4.1.2. Email Notifications
4.1.3. SGPIO Enclosures
4.1.4. Non-RAID Mode Controllers
4.1.5. Browser Issues
4.1.6. Remote System Access on Linux and Windows
4.1.7. RAID 10 Segment Order
4.1.8. RAID 10 Rebuild Order
4.1.9. Locate Logical Drive Blink LED
4.1.10. ARCCONF Backward Compatibility
4.1.11. Updating Hard Disk Firmware on VMware Guest OS
4.1.12. Hot Swap Issues on VMware CentOS Guest OS
4.1.13. Enclosure Status Reporting
4.1.14. PHY Status on Enclosure Backplanes
4.1.15. Special Characters in Logical Device Names
4.1.16. Speaker Status on SuperMicro SAS2X28 Enclosures
4.1.17. Online Help Issues
4.1.18. Broadcasting Alerts About Status and Activity
4.2. Limitations Specific to Series 6, 7, 8 Controllers
4.2.1. RAID-Level Migrations
4.2.2. maxCache Device Migration
4.2.3. ARCCONF maxCache Device Size Issue
4.2.4. Power Management Issues
4.2.5. Verify with Fix
4.2.6. ATA Secure Erase
4.2.7. Series 6 Controller Issues
4.2.8. Simple Volume Support
4.2.9. Auto-Volume Support
4.2.10. Hot-Removing Disk Drives on Xenserver Guest OS
4.2.11. Changing Read and Write Cache Settings for Logical Drive
4.3. Limitations Specific to Smart Family Controllers
4.3.1. SES Passthrough Commands to Expanders
4.3.2. Firmware Upgrade Issues
1. New Features of this Release
o Added new features:
- New command to identify a device by blinking its LEDs.
- Segment and Group Information of a RAID 10 Logical
Device can now be displayed.
- A new UNINIT/TASK command to clear drive configuration
for physical devices containing RAID Information Sector
(RIS) that have been masked in order to protect the
configuration data.
- Ability to show SGPIO virtual SEP information to show
enclosure devices for SGPIO backplanes.
- For cases where a logical drive fails, the array status
is now reported.
- Ability to display physical drive mount point information.
- Ability to display logical drive mount point information.
- Verify Write support is provided.
- Linux Hyper-V is supported for the maxView Storage Manager.
o For Smart family products, added support for Citrix XenServer.
o Bugfixes
2. Software Versions and Documentation
2.1. Utility Software
o Microsemi Adaptec maxView Storage Manager
Version 2.01.00 (22268)
o Microsemi Adaptec ARCCONF Command Line Interface
Utility Version 2.01.00 (22268)
2.2. Documentation
2.2.1. Series 6, 7, 8 Controller Documentation
PDF Format (English/Japanese)
o maxView Storage Manager User's Guide
o Adaptec RAID Controller Command Line Utility
User's Guide
HTML and Text Format
o maxView Storage Manager Online Help
o maxView Storage Manager README.TXT file
2.2.2. HBA 1000 Series Product Documentation
PDF:
o Adaptec maxView Storage Manager User's Guide for
Smart-Family Controllers
o Adaptec HBA 1000 Series Command Line Utility
User's Guide
HTML and Text Format:
o maxView Storage Manager for Smart-Family Controllers
Online Help
o maxView Storage Manager README.TXT file
2.2.3. SmartIOC Product Documentation
PDF:
o Adaptec maxView Storage Manager User's Guide for
Smart-Family Controllers
o Adaptec SmartIOC 2000 Command Line Utility User's
Guide
HTML and Text Format:
o maxView Storage Manager for Smart-Family Controllers
Online Help
o maxView Storage Manager README.TXT file
3. Installation Notes
3.1. Installation and Setup
Refer to your product documentation for the correct
installation and setup details:
o Your product Installation and User's Guide contains
complete installation information for your product's
drivers.
o The maxView Storage Manager User's Guide for your
product contains installation information for the
maxView Storage Manager software.
o The Command Line Utility User's Guide for your product
contains complete installation for ARCCONF.
3.2. Supported Operating Systems
3.2.1. Series 6, 7, 8 Controllers
Microsoft Windows
o Microsoft Windows Server 2012 (64-bit)
o Microsoft Windows Server 2012 R2 (64-bit)
o Microsoft Windows Server 2008 R2 SP1 (64-bit)
o Microsoft Windows SBS 2011 (Standard and Essential)
o Microsoft Windows 10 (32-bit and 64-bit)
o Microsoft Windows 8.1 (32-bit and 64-bit)
o Microsoft Windows 7 (32-bit and 64-bit)
o Microsoft WinPE 8.1 (32-bit and 64-bit)
Linux
o Red Hat Enterprise Linux/CentOS 7.2, 7.1 (64-bit)
o Red Hat Enterprise Linux/CentOS 6.7, 6.6 (64-bit)
o Red Hat Enterprise Linux/CentOS 5.11, 5.10 (64-bit)
o SuSE Linux Enterprise Server 12 SP1 (64-bit)
o SuSE Linux Enterprise Server 12 (64-bit)
o SuSE Linux Enterprise Server 11 SP4 and SP3 (64-bit)
o Debian Linux 8.1 (64-bit)
o Ubuntu Linux 14.04.3, 14.04 (64-bit)
o Ubuntu Linux 12.04.5 (64-bit)
o Fedora Linux 22 (64-bit)
FreeBSD
o FreeBSD 10.2 (64-bit)
o FreeBSD 9.3 (64-bit)
Virtual OS Environments
o VMware ESXi 6.0 (64-bit)
o VMware ESXi 5.5 U2 (64-bit)
o Citrix XenServer 6.5.1 (64-bit)
o Citrix XenServer 6.2 (32-bit)
Solaris
o Solaris 11 (32-bit)
o Solaris 10 U9 (32-bit)
Notes
1. The ARCCONF Command Line Utility is supported on
only 64-bit versions of Microsoft Windows and Linux.
2. Boot USB (offline or pre-boot) for the ARCCONF Command
Line Utility and maxView Storage Manager is supported
in Linux.
3.2.2. Smart Family Controllers
Microsoft Windows
o Microsoft Windows Server 2012 (64-bit)
o Microsoft Windows Server 2012 R2 (64-bit)
o Microsoft Windows Server 2008 R2 SP1 (64-bit)
o Microsoft Windows SBS 2011 (Standard and Essential)
o Microsoft Windows 10 (32-bit and 64-bit)
o Microsoft Windows 8.1 (32-bit and 64-bit)
o Microsoft Windows 7 (32-bit and 64-bit)
Linux
o Red Hat Enterprise Linux/CentOS 7.2, 7.1 (64-bit)
o Red Hat Enterprise Linux/CentOS 6.7, 6.6 (64-bit)
o Red Hat Enterprise Linux/CentOS 5.11, 5.10 (64-bit)
o SuSE Linux Enterprise Server 12 SP1 (64-bit)
o SuSE Linux Enterprise Server 12 (64-bit)
o SuSE Linux Enterprise Server 11 SP4 and SP3 (64-bit)
o Ubuntu Linux 14.04.3, 14.04 (64-bit)
o Ubuntu Linux 12.04.5 (64-bit)
Virtual OS Environments
o VMware ESXi 6.0, ESXi U1 (64-bit)
o VMware ESXi 5.5 U2, ESXi 5.5 U3 (64-bit)
o Citrix XenServer 6.5.1 (64-bit)
o Citrix XenServer 6.2 (32-bit)
Notes
1. The ARCCONF Command Line Utility is supported on
only 64-bit versions of Microsoft Windows and Linux.
2. Boot USB (offline or pre-boot) for the ARCCONF Command
Line Utility and maxView Storage Manager is supported
in Linux.
3.3. General Setup Notes
o maxView Storage Manager is not backwards-compatible with
Series 5 and older Adaptec controller models.
o maxView Storage Manager and legacy Adaptec Storage Manager
(ASM) cannot coexist on the same system.
o For Series 6, 7, 8 controllers:
- maxView Storage Manager is not supported on FreeBSD.
Use ARCCONF to create and manage arrays.
3.4. Remote Access
maxView Storage Manager requires the following range of
ports to be open for remote access:
o 34570-34580 (TCP)
o 34570 (UDP)
o 34577-34580 (UDP)
See also 4.1.6 for OS-specific issues and workarounds.
3.5. Windows 8 Setup
To log in and use maxView Storage Manager on a Windows 8
system, you must create a local user account; you cannot
use your MS Live account.
To create a local user account:
1. Log into your MS Live account.
2. Select Settings->Change PC Settings->Users->Switch to
Local user.
3. Provide account details.
4. Start maxView Storage Manager and log in with your
local user account credentials.
3.6. SLES Setup
o To avoid a problem with launching maxView Storage
Manager on SLES 11 x64 systems with DHCP enabled,
ensure that the /etc/hosts file maps the server
IP address to a valid host name; it is not sufficient
to map the IP address to 'localhost'.
3.7. Ubuntu Setup
o To avoid a maxView Login failure on Ubuntu systems,
you must ensure that the root user account is enabled.
(It is disabled, by default, on Ubuntu 14.04
and later because no password is set.)
For example: sudo bash; sudo passwd root
o When upgrading maxView Storage Manager on an existing
Ubuntu Linux x64 installation, you must enable the
upgrade switch before installing the maxView .deb
package:
export maxView_Upgrade=true
dpkg -i StorMan-*.deb
To uninstall maxView after the upgrade:
export maxView_Upgrade=false
dpkg -r storman
3.8. Bootable USB Image Security Warnings
When running maxView Storage Manager from the bootable
USB image, you may be prompted with one or more with
security warnings before maxView launches. In
each case, acknowledge the warning and continue.
3.9. RAW Device Setup (Series 6, 7, 8 Only)
On Adaptec Series 7 and Adaptec Series 8 controllers,
a RAW Pass Through device is analogous to a JBOD, supported
by Adaptec Series 6 controllers and older. Any drive without
Adaptec RAID metadata is exposed to the OS as a RAW Pass
Through device. To remove the Adaptec metadata and convert
the drive to a RAW device, use the Uninitialize command in
maxView Storage Manager; any existing data on the drive is
destroyed. (You can also run uninit from the BIOS or
ARCCONF.) For more information about working with RAW devices,
see 'controller modes' in the CLI User's Guide, and BIOS
'general settings' in the RAID Controller Installation and
User's Guide.
3.10. maxView Plugin for VMware vSphere Web Client
The maxView Plugin for VMware vSphere Web Client is
supported on VMware 5.5 and 6.0.
4. Known Limitations
4.1. Global Limitations
4.1.1. Dual-Controller Systems
In dual-controller systems, the controller order in
maxView Storage Manager and the BIOS differs. Example:
with an Adaptec 72405 and 7805 installed, the BIOS reports
the 72405 as controller 1 and the 7805 as controller 2;
in the GUI, the controller order is reversed.
4.1.2. Email Notifications
o On Linux systems, we recommend adding the SMTP host
name and the system IP address, to the /etc/hosts file.
Doing so ensures that email notifications will succeed
if you specify the email server in maxView Storage
Manager by host name. Otherwise, email notifications
(including test messages) may fail if the DNS is unable
to resolve the host name.
WORKAROUND: Specify the email server in maxView Storage
Manager by IP address.
o On CentOS 5.9 x64, email notifications may not be sent
for logical drive creations, degraded logical drives,
or logical drives that are rebuilding or fully rebuilt.
4.1.3. SGPIO Enclosures
In this release, maxView Storage Manager does not show
connector information for SGPIO enclosures.
4.1.4. Non-RAID Mode Controllers
maxView Storage Manager can "see" RAID controllers
operating in HBA mode, Auto-Volume mode, and Simple Volume
mode (Adaptec Series 7, Adaptec Series 8, Smart Family
controllers only). However, to change the controller mode
on Adaptec Series 7/8 controllers, you must use ARCCONF
or the BIOS. With Adaptec Smart-Family controllers, you
can also change the controller mode with maxView Storage
Manager.
4.1.5. Browser Issues
To run maxView Storage Manager on the supported browsers.
Javascript must be enabled.
o Due to a certificate bug in Firefox 31.x, maxView
login may fail on RHEL systems with a "Secure
Connection" error. (Firefox 31.1 is the default
browser on RHEL 6.6; on RHEL 7.1, it is 31.4.)
WORKAROUND: Upgrade to Firefox 36.
o With the default Security setting in Microsoft
Internet Explorer 10 and 11, you may be unable to
login to maxView Storage Manager or experience
certain GUI display issues in the maxView online
Help system.
WORKAROUND: Change the default Security setting
from High (or Medium-High) to Medium.
Alternative: add the GUI IP address to the trusted
sites list.
o With Google Chrome, the scrollbar resets itself to
the top after selecting a drive in the Logical Drive
wizard. To select another drive, you must
scroll back down to the drive location.
o With Microsoft Internet Explorer 10, the controller
firmware update wizard does not show the f/w update
file name when the upload completes. To refresh
the display, click Next then Back.
o We do not recommend using multiple browsers
simultaneously on the same maxView
instance. Doing so may cause display issues or freezes;
to restore maxView, refresh the display by pressing F5.
4.1.6. Remote System Access on Linux and Windows
To avoid remote system access failures from Linux
and Windows clients running maxView Storage Manager,
check and update one or all of the following system
and network settings:
Windows:
o Ensure that the DNS server information is properly
configured
RHEL/Linux:
o Set server.properties file permissions to at least
read-only at all levels
1. Stop all maxView services.
2. Set the Permissions of server.properties file to
read and write or read-only at all levels
(Owner, Group and Others).
3. Apply and close.
4. Restart all services in the given order - cim,
agent, tomcat
5. Now try to remote login to this system from any
other system
o Check/update these network settings:
1. Disable SELinux
2. Disable firewall.
3. Disable the ipv6 in the system, if ipconfig shows
both ipv4 and ipv6 address.
4. Remove the virtual bridge virbr0, if present
5. Enter local ip address in 'localip' parameter in
server.properties file
4.1.7. RAID 10 Segment Order
maxView Storage Manager and the Ctrl-A BIOS report the
wrong segment order for RAID 10s, regardless of the order
in which the drives are selected.
Example 1: Create RAID 10 with 2 SDDs and 2 HDDs in maxView
Storage Manager:
(1a) ARCCONF and maxView Storage Manager see the
following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
Device 0 (H1)
(1b) the BIOS/CTRL-A sees the following RAID segment
order:
Device 2 (S1)
Device 1 (H2)
Device 0 (H1)
Device 3 (S2)
(1c) the correct and expected RAID segment order is:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
Example 2: Create RAID 10 with 2 SDDs and 2 HDDs
with ARCCONF:
(2a) the BIOS/CTRL-A sees the following RAID segment
order:
Device 0 (H1)
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
(2b) ARCCONF and maxView Storage Manager see the
correct RAID segment order:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
4.1.8. RAID 10 Rebuild Order
With a degraded RAID 10 logical drive, the drive is
rebuilt one leg at a time, not in parallel.
4.1.9. Locate Logical Drive Blink LED
In maxView Storage Manager, Locate Logical Drive
continues to blink the LED for a pulled physical drive
in the array after the locate action is stopped.
(For unpulled drives, the blinking stops.) This issue is
not seen with ARCCONF.
4.1.10. ARCCONF Backward Compatibility
ARCCONF is backward compatible with older Adaptec
controller models. As a result, the ARCCONF user's guide
and online help show command options that are not
supported by newer Adaptec controllers, like the
Adaptec Series 7 and Adaptec Series 8 or later products.
Example: With ARCCONF SETMAXCACHE, Adaptec Series 7 and
Series 8 controllers do not support ADDTOPOOL or
REMOVEFROMPOOL
4.1.11. Updating Hard Disk Firmware on VMware Guest OS
Updating the firmware for a SAS hard disk drive with
ARCCONF/maxView can crash (PSOD) the VMware Guest OS.
This issue is seen with SAS hard drives only; with
SATA drives, the firmware update completes successfully.
4.1.12. Hot Swap Issues on VMware CentOS Guest OS
Due to a limitation with the VMware CentOS Guest OS
network configuration, maxView Storage Manager does not
show newly added or removed hot swap drives.
(ARCCONF sees the configuration change but maxView
does not.)
WORKAROUND: (1) reboot the system or restart maxView
services; (2) adjust the network configuration; contact
Adaptec Support for more information.
4.1.13. Enclosure Status Reporting
Enclosure status, in maxView Storage Manager, is
event-driven. As a result, enclosures can have a
"Degraded" status even if related resources (fan,
temperature, power) are performing normally (Optimal
status). For instance, the Enclosure status changes
to "Degraded" if the system reports an "Enclosure
device not responding ..." event, even if other sensor
values are normal.
4.1.14. PHY Status on Enclosure Backplanes
In the Controller Properties window, maxView Storage
Manager shows the Connector Info as "unknown" for all
PHYs on an enclosure-based backplane (for instance, a
backplane attached to connector 1).
4.1.15. Special Characters in Logical Device Names
Special characters are permitted in logical device
names in maxView Storage Manager, the BIOS, and ARCCONF.
However, with Linux ARCCONF (create, setname), special
characters must be "escaped" to ensure proper
interpretation. For example:
ARCCONF SETNAME 1 LOGICALDRIVE 1 arc_ldrive%\$12\&amp;
4.1.16. Speaker Status on SuperMicro SAS2X28 Enclosures
SuperMicro SAS2X28 enclosures do not propagate
the speaker status to maxView Storage Manager. As
a result, maxView always displays the speaker
status as Off.
4.1.17. Online Help Issues
o When opening the maxView Storage Manager help
from a remote Linux system (eg, over a VPN), the
help window may fail to open with a 'can't establish
connection to server' message.
WORKAROUND: replace 127.0.0.1:8443 in the URL with
<system_ip_address>:8443
o In IE11, topics in the help may display with a 'Topics
Not Found' message when their corresponding links are
clicked in the navigation pane of the help.
WORKAROUND: click on the "Add" browser link to add
certification to view the content.
4.1.18. Broadcasting Alerts About Status and Activity
This feature is not supported by the maxView Storage
Manager or ARCCONF and has been removed from the product
documentation.
4.2. Limitations Specific to Series 6, 7, 8 Controllers
4.2.1. RAID-Level Migrations
o The following RAID-level migrations (RLM) are
supported in this release:
- RAID 0 to RAID 5
- RAID 0 to RAID 10
- RAID 5 to RAID 6
- RAID 6 to RAID 5
- RAID 10 to RAID 5
- RAID 5 to RAID 10
- RAID 1 to RAID 5
- SIMPLE VOLUME to RAID 1
- RAID 1 to SIMPLE VOLUME
o When migrating a Simple Volume to RAID 1, maxView
Storage Manager reports the logical drive state as
Impacted (rather than Reconfiguring);
this is normal.
o We do not recommend performing a RAID-level
migration or Online Capacity Expansion (OCE)
on a logical drive with maxCache SSD caching
enabled.
NOTE: maxView Storage Manager grays out the
options for logical drives with maxCache enabled.
ARCCONF terminates the task.
o Always allow a RAID-level migration to complete
before creating a support archive file. Otherwise,
the support archive will include incorrect
partition information. Once the migration is
complete, the partition information will be reported
correctly.
4.2.2. maxCache Device Migration
Only one maxCache Device is supported per controller.
Moving the maxCache Device (all underlying SSDs) from
one controller to another (assuming both controllers
support maxCache) is supported only if (1) the new
controller does not have a maxCache Device or any other
maxCache Device with a conflicting device number and
(2) only after a clean shutdown
on the old controller.
4.2.3. ARCCONF maxCache Device Size Issue
ARCCONF supports >2TB maxCache Devices if you create
the device with the 'max' parameter. However, the
functional limit for the maxCache Device is 2TB,
which is also the limit in maxView Storage Manager.
4.2.4. Power Management Issues
o Power management is not supported on FreeBSD.
o Capturing support logs from maxView or ARCCONF
will spin up drives when power management is
active. This behavior is by design.
o The Logical Drive Creation wizard no longer
includes the option to enable power management settings.
WORKAROUND: Enable power management for the
logical drive from the Set Properties window.
4.2.5. Verify with Fix
In maxView Storage Manager and ARCCONF, the Verify
with Fix operation is NOT available when:
1. The logical drive has a non-redundant RAID level
2. Other tasks are in progress on the logical drive
3. The logical drive is in a non-optimal or impacted state
4.2.6. ATA Secure Erase
In ARCCONF, the ATA Secure Erase operation cannot
be aborted. Once started, it continues to completion.
NOTE: ATA Secure Erase is also available in the
Ctrl-A BIOS and maxView Storage Manager.
4.2.7. Series 6 Controller Issues
The following issues are seen only with Adaptec
Series 6 RAID controllers:
o In maxView Storage Manager, the Preserve Cache
option on the Set Properties window is not
supported on Series 6 RAID controllers. Attempting
to set this option for the Series 6 controller fails.
o Renaming a RAID volume disables the write-cache
(if enabled). You cannot re-enable the write-cache
in maxView Storage Manager.
WORKAROUND: Use ARCCONF to enable the write-cache.
o In a VMware Guest OS under VMware 5.x, maxView
Storage Manager and ARCCONF do not detect existing
logical drive partitions. As a result,
attempting to delete, clear, or erase the logical
drive may fail.
o On Series 6 controllers, maxView Storage Manager
deletes partitioned JBODs without issuing a
warning message.
o Series 6 controllers do not support the ARCCONF
GETPERFORM command.
4.2.8. Simple Volume Support
o In this release, you can create a maximum of 128
Simple Volumes in maxView Storage Manager, ARCCONF,
or the BIOS.
o When a Simple Volume fails, the status remains
unchanged after drive replacement.
WORKAROUND: Manually delete the Simple Volume to
remove it.
4.2.9. Auto-Volume Support
o Changing a controller into Auto-Volume mode
(ARCCONF/BIOS) is not supported if the configuration
includes any logical device type other than Simple
Volume, including a maxCache Device. The mode switch
from RAID mode to Auto-Volume mode is blocked if any
other type of logical volume exists (including
maxCache). After switching to Auto-Volume mode,
you can create and delete Simple Volumes
only in maxView Storage Manager and ARCCONF.
o In Auto-Volume mode, only the first 128 RAW drives
are converted to Simple Volumes; the rest of the
RAW drives remain unchanged. If you uninitialize
a Ready drive while the controller is in Auto-Volume
mode, the firmware converts the drive automatically
until the Simple Volume count reaches the maximum.
4.2.10. Hot-Removing Disk Drives on Xenserver Guest OS
XenServer does not support "hot-removal" of disk
drives from a partitioned logical drive. As a result,
if you hot remove a disk from a logical drive,
the Guest OS becomes inaccessible because the drive
partition remains visible to the OS instead of being cleared.
WORKAROUND: Reboot the XenServer host, detach the
failed partition, then restart the VM.
4.2.11. Changing Read and Write Cache Settings for
Logical Drive
maxView Storage Manager does not allow you to change
the read-cache and write-cache settings for a logical drive
in one step. You must click OK after each change.
4.3. Limitations Specific to Smart Family Controllers
4.3.1. SES Passthrough Commands to Expanders
SES passthrough commands to expanders fail.
4.3.2 Firmware Upgrade Issues
For systems using Adaptec HBA 1000 with an Adaptec
SAS Expander 82885T card, where the ARCCONF utility
is used to upgrade the expander firmware, ARCCONF
may crash if 64-bit chunk sizes are used.
WORKAROUND: Use 32-bit chunk sizes to upgrade/downgrade
the expander firmware.
Copyright 2016 Microsemi Corporation. All rights reserved.
Microsemi and the Microsemi logo are trademarks of Microsemi
Corporation. All other trademarks and service marks are
the property of their respective owners.
PMC-2153191, Issue 2
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive
portfolio of semiconductor and system solutions for communications,
defense and security, aerospace, and industrial markets.
Products include high-performance and radiation-hardened
analog mixed-signal integrated circuits, FPGAs, SoCs, and
ASICs; power management products; timing and synchronization
devices and precise time solutions; voice processing devices;
RF solutions; discrete components; enterprise storage and
communications solutions; security technologies and scalable
anti-tamper products; Ethernet solutions; Power-over-Ethernet
ICs and midspans; custom design capabilities and services.
Microsemi is headquartered in Aliso Viejo, California and has
approximately 4,800 employees world-wide.
Learn more at www.microsemi.com.
Microsemi makes no warranty, representation, or guarantee
regarding the information contained herein or the suitability
of its products and services for any particular purpose,
nor does Microsemi assume any liability whatsoever arising
out of the application or use of any product or circuit.
The products sold hereunder and any other products sold
by Microsemi have been subject to limited testing and should
not be used in conjunction with mission-critical equipment
or applications. Any performance specific ations are believed
to be reliable but are not verified, and Buyer must conduct
and complete all performance and other testing of the products,
alone and together with, or installed in, any end-products.
Buyer shall not rely on any data and performance specifications
or parameters provided by Microsemi. It is the Buyer's
responsibility to independently determine suitability of
any products and to test and verify the same. The information
provided by Microsemi hereunder is provided as is, where is
and with all faults, and the entire risk associated with such
information is entirely with the Buyer. Microsemi does not
grant, explicitly or implicitly, to any party any patent
rights, licenses, or any other IP rights, whether with regard
to such information itself or anything described by
such information. Information provided in this document is
proprietary to Microsemi, and Microsemi reserves the right
to make any changes to the information in this document or
to any products and services at any time without notice.
The technology discussed in this document may be protected by
one or more patent grants.

BIN
amd64/2.01/arcconf Executable file

Binary file not shown.

292
amd64/2.02/License.txt Normal file
View File

@ -0,0 +1,292 @@
International License Agreement for Non-Warranted Programs
Part 1 - General Terms
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE PROGRAM.
Adaptec WILL LICENSE THE PROGRAM TO YOU ONLY IF YOU FIRST ACCEPT THE
TERMS OF THIS AGREEMENT. BY USING THE PROGRAM YOU AGREE TO THESE
TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,
PROMPTLY RETURN THE UNUSED PROGRAM TO THE PARTY (EITHER Adaptec OR
ITS RESELLER) FROM WHOM YOU ACQUIRED IT TO RECEIVE A REFUND OF
THE AMOUNT YOU PAID.
The Program is owned by (Adaptec) or a supplier of Adaptec
and is copyrighted and licensed, not sold.
The term "Program" means the original program and all whole or
partial copies of it. A Program consists of machine-readable
instructions, its components, data, audio-visual content (such
as images, text, recordings, or pictures), and related licensed
materials.
This Agreement includes Part 1 - General Terms and Part 2
Country unique Terms and is the complete agreement regarding the
use of this Program, and replaces any prior oral or written
communications between you and Adaptec. The terms of Part 2 may
replace or modify those of Part 1.
1. License
Use of the Program
Adaptec grants you a nonexclusive license to use the Program.
You may 1) use the Program to the extent of authorizations you
have acquired and 2) make and install copies to support the
level of use authorized, providing you reproduce the copyright
notice and any other legends of ownership on each copy, or
partial copy, of the Program.
If you acquire this Program as a program upgrade, your
authorization to use the Program from which you upgraded is
terminated.
You will ensure that anyone who uses the Program does so only in
compliance with the terms of this Agreement.
You may not 1) use, copy, modify, or distribute the Program
except as provided in this Agreement; 2) reverse assemble,
reverse compile, or otherwise translate the Program except as
specifically permitted by law without the possibility of
contractual waiver; or 3) sublicense, rent, or lease the
Program.
Transfer of Rights and Obligations
You may transfer all your license rights and obligations under a
Proof of Entitlement for the Program to another party by
transferring the Proof of Entitlement and a copy of this
Agreement and all documentation. The transfer of your license
rights and obligations terminates your authorization to use the
Program under the Proof of Entitlement.
2. Proof of Entitlement
The Proof of Entitlement for this Program is evidence of your
authorization to use this Program and of your eligibility for
future upgrade program prices (if announced) and potential
special or promotional opportunities.
3. Charges and Taxes
Adaptec defines use for the Program for charging purposes and
specifies it in the Proof of Entitlement. Charges are based on
extent of use authorized. If you wish to increase the extent of
use, notify Adaptec or its reseller and pay any applicable charges.
Adaptec does not give refunds or credits for charges already due or
paid.
If any authority imposes a duty, tax, levy or fee, excluding
those based on Adaptec's net income, upon the Program supplied by
Adaptec under this agreement, then you agree to pay that amount
as Adaptec specifies or
supply exemption documentation.
4. No Warranty
SUBJECT TO ANY STATUTORY WARRANTIES WHICH CAN NOT BE EXCLUDED,
Adaptec MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE WARRANTY OF NON-INFRINGEMENT
AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE PROGRAM OR TECHNICAL SUPPORT,
IF ANY. Adaptec MAKES NO WARRANTY REGARDING THE CAPABILITY OF THE
PROGRAM TO CORRECTLY PROCESS, PROVIDE AND/OR RECEIVE DATE DATA
WITHIN AND BETWEEN THE 20TH AND 21ST CENTURIES.
The exclusion also applies to any of Adaptec's subcontractors,
suppliers, or program developers (collectively called
"Suppliers").
Manufacturers, suppliers, or publishers of non-Adaptec Programs may
provide their own warranties.
5. Limitation of Liability
NEITHER Adaptec NOR ITS SUPPLIERS WILL BE LIABLE FOR ANY DIRECT OR
INDIRECT
DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
SAVINGS, OR ANY INCIDENTAL, SPECIAL, OR OTHER ECONOMIC
CONSEQUENTIAL DAMAGES, EVEN IF Adaptec IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
6. General
Nothing in this Agreement affects any statutory rights of
consumers that cannot be waived or limited by contract.
Adaptec may terminate your license if you fail to comply with the
terms of this Agreement. If Adaptec does so, you must immediately
destroy the Program and all copies you made of it.
You agree to comply with applicable export laws and regulations.
Neither you nor Adaptec will bring a legal action under this
Agreement more than two years after the cause of action arose
unless otherwise provided by local law without the possibility
of contractual waiver or limitation.
Neither you nor Adaptec is responsible for failure to fulfill any
obligations due to causes beyond its control.
Adaptec does not provide program services or technical support,
unless Adaptec specifies otherwise.
The laws of the country in which you acquire the Program govern
this Agreement, except 1) in Australia, the laws of the State or
Territory in which the transaction is performed govern this
Agreement; 2) in Albania, Armenia, Belarus, Bosnia/Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan,
Kirghizia, Former Yugoslav Republic of Macedonia
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic,
Slovenia, Ukraine, and Federal Republic of Yugoslavia, the laws
of Austria govern this Agreement; 3) in the United Kingdom, all
disputes relating to this Agreement will be governed by English
Law and will be submitted to the exclusive jurisdiction of the
English courts; 4) in Canada, the laws in the Province of
Ontario govern this Agreement; and 5) in the United States and
Puerto Rico, and People's Republic of China, the laws of the
State of New York govern this Agreement.
Part 2 - Country-unique Terms
AUSTRALIA:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Trade Practices Act 1974 or other
legislation and are only limited to the extent permitted by the
applicable legislation.
Limitation of Liability (Section 3):
The following paragraph is added to this Section:
Where Adaptec is in breach of a condition or warranty implied by the
Trade Practices Act 1974, Adaptec's liability is limited to the
repair or replacement of the goods, or the supply of equivalent
goods. Where that condition or warranty relates to right to
sell, quiet possession or clear title, or the goods are of a
kind ordinarily acquired for personal, domestic or household use
or consumption, then none of the limitations in this paragraph
apply.
GERMANY:
No Warranty (Section 4):
The following paragraphs are added to this Section:
The minimum warranty period for Programs is six months.
In case a Program is delivered without Specifications, we will
only warrant that the Program information correctly describes
the Program and that the Program can be used according to the
Program information. You have to check the usability according
to the Program information within the "money-back guaranty"
period.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
The limitations and exclusions specified in the Agreement will
not apply to damages caused by Adaptec with fraud or gross
negligence, and for express warranty.
INDIA:
General (Section 6):
The following replaces the fourth paragraph of this Section:
If no suit or other legal action is brought, within two years
after the cause of action arose, in respect of any claim that
either party may have against the other, the rights of the
concerned party in respect of such claim will be forfeited and
the other party will stand released from its obligations in
respect of such claim.
IRELAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Except as expressly provided in these terms and conditions, all
statutory conditions, including all warranties implied, but
without prejudice to the generality of the foregoing, all
warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
ITALY:
Limitation of Liability (Section 5):
This Section is replaced by the following:
Unless otherwise provided by mandatory law, Adaptec is not liable
for any damages which might arise.
NEW ZEALAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Consumer Guarantees Act 1993 or
other legislation which cannot be excluded or limited. The
Consumer Guarantees Act 1993 will not apply in respect of any
goods or services which Adaptec provides, if you require the goods
and services for the purposes of a business as defined in that
Act.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
Where Programs are not acquired for the purposes of a business
as defined in the Consumer Guarantees Act 1993, the limitations
in this Section are subject to the limitations in that Act.
PEOPLE'S REPUBLIC OF CHINA:
Charges (Section 3):
The following paragraph is added to the Section:
All banking charges incurred in the People's Republic of China
will be borne by you and those incurred outside the People's
Republic of China will be borne by Adaptec.
UNITED KINGDOM:
Limitation of Liability (Section 5):
The following paragraph is added to this Section at the end of
the first paragraph:
The limitation of liability will not apply to any breach of
Adaptec's obligations implied by Section 12 of the Sales of Goods
Act 1979 or Section 2 of the Supply of Goods and Services Act
1982.
UNITED STATES AND CANADA:
No Country-unique Terms apply.
By continuing with the installation of the Program, you are
accepting the terms and conditions above.

708
amd64/2.02/README.TXT Normal file
View File

@ -0,0 +1,708 @@
README: maxView Storage Manager & ARCCONF Command Line Utility
Microsemi Adaptec maxView Storage Manager
Microsemi Adaptec Command Line Interface Utility (ARCCONF)
as of September 7, 2016
--------------------------------------------------------------------
Please check the product website for the newer versions of this file to
ensure you are reviewing the latest information.
This file contains important information about issues and errata that were
discovered after completion of the standard product documentation.
In the case of conflict between various parts of the documentation set,
this file contains the most current information.
--------------------------------------------------------------------
Table of Contents
Chapter 1. New Features of this Release
Chapter 2. Software Versions and Documentation
2.1 Utility Software
2.2 Documentation
2.2.1 Series 6, 7, 8 Product Documentation
2.2.2 HBA 1000 Series Product Documentation
2.2.3 SmartIOC Product Documentation
Chapter 3. Installation Notes
3.1 Installation and Setup
3.2 Supported Operating Systems
3.2.1 Series 6, 7, 8 Controllers
3.2.2 Smart Family Controllers
3.3 General Setup Notes
3.4 Remote Access
3.5 Windows 8 Setup
3.6 SLES Setup
3.7 Ubuntu Setup
3.8 Bootable USB Image Security Warnings
3.9 RAW Device Setup (Series 6, 7, 8 Only)
3.10 maxView Plugin for VMware vSphere Web Client
Chapter 4. Known Limitations
4.1 Global Limitations
4.1.1 Dual-Controller Systems
4.1.2 Email Notifications
4.1.3 SGPIO Enclosures
4.1.4 Non-RAID Mode Controllers
4.1.5 Browser Issues
4.1.6 Remote System Access on Linux and Windows
4.1.7 RAID 10 Segment Order
4.1.8 RAID 10 Rebuild Order
4.1.9 Locate Logical Drive Blink LED
4.1.10 ARCCONF Backward Compatibility
4.1.11 Updating Hard Disk Firmware on VMware Guest OS
4.1.12 Hot Swap Issues on VMware CentOS Guest OS
4.1.13 Enclosure Status Reporting
4.1.14 PHY Status on Enclosure Backplanes
4.1.15 Special Characters in Logical Device Names
4.1.16 Speaker Status on SuperMicro SAS2X28 Enclosures
4.1.17 Online Help Issues
4.1.18 Broadcasting Alerts About Status and Activity
4.1.19 User-Specified Archive Path
4.1.20 Clear Configuration Status After Re-Insertion
4.1.21 Configuration Changes in Device Manager
4.2 Limitations for Series 6, 7, 8 Controllers
4.2.1 RAID-Level Migrations
4.2.2 maxCache Device Migration
4.2.3 ARCCONF maxCache Device Size Issue
4.2.4 Power Management Issues
4.2.5 Verify/Verify with Fix
4.2.6 ATA Secure Erase
4.2.7 Series 6 Controller Issues
4.2.8 Simple Volume Support
4.2.9 Auto-Volume Support
4.2.10 Hot-Removing Disk Drives on Xenserver Guest OS
4.2.11 Viewing Logical Drive Details After Re-Insertion
4.3 Limitations for Smart Family Controllers
4.3.1 SES Passthrough Commands to Expanders
4.3.2 Firmware Upgrade Issues
4.3.3 Mount Point Information with MPIO Support
4.3.4 Locate Physical Disk LED Behavior
--------------------------------------------------------------------
Chapter 1. New Features of this Release
* Added new features:
* Support for SMR HA(1) and SMR DM drives for all RAID levels and hot spares
* Ability to attach support archive to email notifications
* Save Config/Restore Config ribbon actions moved from Controller group to
System group (Clear Config remains in Controller group.)
* Misc UI changes/enhancements:
* SMR drive identification in Enterprise view, Logical Device wizard,
Spare Management wizard, Dashboard (tabs)
* Display I2C address in Controller Properties tab (Smart controllers
only)
* Display physical devices in Summary panel for Logical Device wizard
* Display enclosure information in Summary panel when multiple enclosures
selected for Initialize/Uninitialize (Series 6/7/8)
* Display specific failure messages instead of generic "Operation failed"
* Display event message for Firmware Update complete
* Display new firmware image version in maxView (and ARCCONF) for
Microsemi Adaptec(r) SAS Expander AEC-82885T
* New Enclosure node tabs: Resources, Slots
* Multi-language support in maxView: English, Chinese, German, Japanese,
Spanish, Russian
* New/Enhanced ARCCONF commands:
* Series 6/7/8: UARTLOG CONSOLE
* Smart/HBA controllers: SETCONTROLLERPARAM <I2CAddress>, SAVECONFIG,
PLAYCONFIG
* Add unused and reserved size of physical drive properties in
GETCONFIG output
* Support for statically-linked ARCCONF on Linux x64 (allows ARCCONF to run
without any OS library dependency)
* Support for PowerPC platforms running RHEL, SLES, and Ubuntu, and PowerKVM
(Series 6/7/8)
* Support for Microsoft Hyper-V hypervisor, Hyper-V Windows & Linux
Guest OSs
* Bugfixes
---------------
(1) SMR: Shingled Magnetic Recording. HA: Host Aware (backward compatible
with standard HDD). DM: Device Managed (backward compatible with standard
HDD).
--------------------------------------------------------------------
Chapter 2. Software Versions and Documentation
2.1. Utility Software
* Microsemi Adaptec(r) maxView Storage Manager Version 2.02.00 (B22404)
* Microsemi Adaptec(r) ARCCONF Command Line Interface Utility Version 2.02.00 (B22404)
2.2. Documentation
2.2.1 Series 6, 7, 8 Product Documentation
PDF Format
* maxView Storage Manager User's Guide for Microsemi Adaptec ARC-Family
Controllers
* Microsemi Adaptec RAID Controller Command Line Utility User's Guide
HTML and Text Format
* maxView Storage Manager Online Help
* maxView Storage Manager/ARCCONF README.TXT file
2.2.2 HBA 1000 Series Product Documentation
PDF:
* maxView Storage Manager User's Guide for Microsemi Smart-Family Controllers
* Microsemi Adaptec HBA 1000 Series Command Line Utility User's Guide
HTML and Text Format:
* maxView Storage Manager for Smart-Family Controllers Online Help
* maxView Storage Manager/ARCCONF README.TXT file
2.2.3 SmartIOC Product Documentation
PDF:
* maxView Storage Manager User's Guide for Microsemi Smart-Family Controllers
* Microsemi SmartIOC 2000 Command Line Utility User's Guide
HTML and Text Format:
* maxView Storage Manager for Microsemi Smart-Family Controllers Online Help
* maxView Storage Manager/ARCCONF README.TXT file
--------------------------------------------------------------------
Chapter 3. Installation Notes
3.1. Installation and Setup
Refer to your product documentation for the installation and setup details:
* Your product Installation and User's Guide contains complete installation
information for your product's drivers.
* The maxView Storage Manager User's Guide for your product contains
installation information for the maxView Storage Manager software.
* The Command Line Utility User's Guide for your product contains complete
installation information for ARCCONF.
3.2 Supported Operating Systems
Notes:
1. maxView Storage Manager and ARCCONF Command Line Utility are supported on
64-bit operating systems only.
2. The Boot USB (offline or pre-boot) for ARCCONF and maxView Storage Manager
is supported on Linux.
3.2.1 Series 6, 7, 8 Controllers
Microsoft Windows
* Microsoft(r) Windows(r) Server 2012 (64-bit)
* Microsoft(r) Windows(r) Server 2012 R2 (64-bit)
* Microsoft(r) Windows(r) Server 2008 R2 SP1 (64-bit)
* Microsoft(r) Windows(r) SBS 2011 (Standard and Essential, 64-bit)
* Microsoft(r) Windows(r) 10 (64-bit)
* Microsoft(r) Windows(r) 8.1 (64-bit)
* Microsoft(r) Windows(r) 7 (64-bit)
* Microsoft(r) WinPE 5.x (64-bit)
Linux
* Red Hat(r) Enterprise Linux/CentOS 7.2, 7.1 (64-bit)
* Red Hat(r) Enterprise Linux/CentOS 6.8, 6.7 (64-bit)
* Red Hat(r) Enterprise Linux/CentOS 5.11, 5.10 (64-bit)
* SuSE Linux Enterprise Server 12 SP1 (64-bit)
* SuSE Linux Enterprise Server 12 (64-bit)
* SuSE Linux Enterprise Server 11 SP4 and SP3 (64-bit)
* Debian Linux 8.3, 8.1 (64-bit)
* Ubuntu Linux 16.04, 14.04.4 (64-bit)
* Fedora Linux 23 (64-bit)
Linux on PowerPC
* Red Hat(r) Enterprise Linux 7.2 (64-bit)
* SuSE Linux Enterprise Server 12 SP1 (64-bit)
* Ubuntu Linux 16.04, 14.04.4 (64-bit)
* PowerKVM 3.1.0.1 (64-bit)
FreeBSD
* FreeBSD(r) 10.2 (64-bit)
* FreeBSD(r) 9.3 (64-bit)
Solaris
* Solaris 11.2 (64-bit)
* Solaris 10 U9 (64-bit)
Virtual OS Environments
* VMware vSphere 6.0 (64-bit)
* VMware ESXi 6.0, ESXi 5.5 U3 and U2 (64-bit)
* Citrix XenServer 6.5.1 (64-bit)
* Microsoft Hyper-V (64-bit)
3.2.2 Smart Family Controllers
Microsoft Windows
* Microsoft(r) Windows(r) Server 2012 (64-bit)
* Microsoft(r) Windows(r) Server 2012 R2 (64-bit)
* Microsoft(r) Windows(r) Server 2008 R2 SP1 (64-bit)
* Microsoft(r) Windows(r) SBS 2011 (Standard and Essential, 64-bit)
* Microsoft(r) Windows(r) 10 (64-bit)
* Microsoft(r) Windows(r) 8.1 (64-bit)
* Microsoft(r) Windows(r) 7 (64-bit)
Linux
* Red Hat(r) Enterprise Linux/CentOS 7.2, 7.1 (64-bit)
* Red Hat(r) Enterprise Linux/CentOS 6.8, 6.7 (64-bit)
* Red Hat(r) Enterprise Linux/CentOS 5.11, 5.10 (64-bit)
* SuSE Linux Enterprise Server 12 SP1 (64-bit)
* SuSE Linux Enterprise Server 12 (64-bit)
* SuSE Linux Enterprise Server 11 SP4 and SP3 (64-bit)
* Ubuntu Linux 16.04, 14.04.4 (64-bit)
Virtual OS Environments
* VMware vSphere 6.0 U1, 6.0 (64-bit)
* VMware ESXi 6.0, ESXi 5.5 U3 and U2 (64-bit)
* Citrix XenServer 6.5.1 (64-bit)
* Microsoft Hyper-V (64-bit)
3.3 General Setup Notes
* maxView Storage Manager is not backwards-compatible with Series 5 and
older Adaptec controller models.
* maxView Storage Manager and legacy Adaptec Storage Manager (ASM) cannot
coexist on the same system.
* For Series 6, 7, 8 controllers:
* maxView Storage Manager is not supported on FreeBSD. Use ARCCONF to
create and manage arrays.
3.4 Remote Access
maxView Storage Manager requires the following range of ports to be open for
remote access:
* 34570-34580 (TCP)
* 34570 (UDP)
* 34577-34580 (UDP)
3.5 Windows 8 Setup
To log in and use maxView Storage Manager on a Windows 8 system, you must
create a local user account; you cannot use your MS Live account. To create a
local user account:
1. Log into your MS Live account.
2. Select Settings->Change PC Settings->Users->Switch to Local user.
3. Provide account details.
4. Start maxView Storage Manager and log in with your local user account
credentials.
3.6 SLES Setup
To avoid a problem with launching maxView Storage Manager on SLES 11 or SLES
12 x64 systems with DHCP enabled, ensure that the /etc/hosts file maps the
server IP address to a valid host name; it is not sufficient to map the IP
address to 'localhost'.
3.7 Ubuntu Setup
* To avoid a maxView Login failure on Ubuntu systems, you must ensure that the
root user account is enabled. (It is disabled, by default, on Ubuntu 14.04
and later because no password is set.)
For example: sudo bash; sudo passwd root
* When upgrading maxView Storage Manager on an existing Ubuntu Linux x64
installation, you must enable the upgrade switch before installing the
maxView .deb package:
export maxView_Upgrade=true
dpkg -i StorMan-*.deb
To uninstall maxView after the upgrade:
export maxView_Upgrade=false
dpkg -r storman
3.8 Bootable USB Image Security Warnings
When running maxView Storage Manager from the bootable USB image, you may be
prompted with one or more with security warnings before maxView launches. In
each case, acknowledge the warning and continue.
3.9 RAW Device Setup (Series 6, 7, 8 Only)
On Adaptec Series 7 and Adaptec Series 8 controllers, a RAW Pass Through
device is analogous to a JBOD, supported by Adaptec Series 6 controllers and
older. Any drive without Adaptec RAID metadata is exposed to the OS as a RAW
Pass Through device. To remove the Adaptec metadata and convert the drive to a
RAW device, use the Uninitialize command in maxView Storage Manager; any
existing data on the drive is destroyed. (You can also run uninit from the
BIOS or ARCCONF.) For more information about working with RAW devices, see
'controller modes' in the CLI User's Guide, and BIOS 'general settings' in the
RAID Controller Installation and User's Guide.
3.10 maxView Plugin for VMware vSphere Web Client
The maxView Plugin for VMware vSphere Web Client is supported on VMware 5.5
and 6.0.
--------------------------------------------------------------------
Chapter 4. Known Limitations
4.1 Global Limitations
4.1.1 Dual-Controller Systems
In dual-controller systems, the controller order in maxView Storage Manager
and the BIOS differs. Example: with an Adaptec 72405 and 7805 installed, the
BIOS reports the 72405 as controller 1 and the 7805 as controller 2; in the
GUI, the controller order is reversed.
4.1.2 Email Notifications
On Linux systems, we recommend adding the SMTP host name and the system IP
address, to the /etc/hosts file. Doing so ensures that email notifications
will succeed if you specify the email server in maxView Storage Manager by
host name. Otherwise, email notifications (including test messages) may fail
if the DNS is unable to resolve the host name.
WORKAROUND: Specify the email server in maxView Storage Manager by IP address.
4.1.3 SGPIO Enclosures
In this release, maxView Storage Manager does not show connector information
for SGPIO enclosures.
4.1.4 Non-RAID Mode Controllers
maxView Storage Manager can "see" RAID controllers operating in HBA mode,
Auto-Volume mode, and Simple Volume mode (Adaptec Series 7, Adaptec Series 8,
Smart Family controllers only). However, to change the controller mode on
Adaptec Series 7/8 controllers, you must use ARCCONF or the BIOS. With Adaptec
Smart-Family controllers, you can also change the controller mode with maxView
Storage Manager.
4.1.5 Browser Issues
* To run maxView Storage Manager on the supported browsers, Javascript must be
enabled.
* With Ubuntu Linux, Firefox 46/47 has alignment problems in some parts of the
maxView GUI.
WORKAROUND: Upgrade to Firefox 48.
* Due to a certificate bug in Firefox 31.x, maxView login may fail on RHEL
systems with a "Secure Connection" error. (Firefox 31.1 is the default
browser on RHEL 6.6; on RHEL 7.1, it is 31.4.)
WORKAROUND: Upgrade to the latest Firefox version.
* With the default Security setting in Microsoft Internet Explorer 10 and 11,
you may be unable to login to maxView Storage Manager or experience certain
GUI display issues in the maxView online Help system.
WORKAROUND: Change the default Security setting from High (or Medium-High)
to Medium. Alternative: add the GUI IP address to the trusted sites list.
* With Google Chrome, the scrollbar resets itself to the top after selecting a
drive in the Logical Drive wizard. To select another drive, you must scroll
back down to the drive location.
* With Microsoft Internet Explorer 10, the controller firmware update wizard
does not show the f/w update file name when the upload completes. To refresh
the display, click Next then Back.
* We do not recommend using multiple browsers simultaneously on the same
maxView instance. Doing so may cause display issues or freezes; to restore
maxView, refresh the display by pressing F5.
4.1.6 Remote System Access on Linux and Windows
To avoid remote system access failures from Linux and Windows clients running
maxView Storage Manager, check and update one or all of the following system
and network settings:
Windows:
* Ensure that the DNS server information is properly configured
RHEL/Linux:
Set server.properties file permissions to at least read-only at all levels
1. Stop all maxView services.
2. Set the Permissions of server.properties file to read and write or read-
only at all levels (Owner, Group and Others). Apply and close.
3. Restart all services in the given order - cim, agent, tomcat
4. Now try to remote login to this system from any other system
4.1.7 RAID 10 Segment Order
maxView Storage Manager and the Ctrl-A BIOS report the wrong segment order for
RAID 10s, regardless of the order in which the drives are selected.
Example 1: Create RAID 10 with 2 SDDs and 2 HDDs in maxView Storage Manager:
(1a) ARCCONF and maxView Storage Manager see the following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
Device 0 (H1)
(1b) the BIOS/CTRL-A sees the following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 0 (H1)
Device 3 (S2)
(1c) the correct and expected RAID segment order is:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
Example 2: Create RAID 10 with 2 SDDs and 2 HDDs with ARCCONF:
(2a) the BIOS/CTRL-A sees the following RAID segment order:
Device 0 (H1)
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
(2b) ARCCONF and maxView Storage Manager see the correct RAID segment order:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
4.1.8 RAID 10 Rebuild Order
With a degraded RAID 10 logical drive, the drive is rebuilt one leg at a time,
not in parallel.
4.1.9 Locate Logical Drive Blink LED
In maxView Storage Manager, Locate Logical Drive continues to blink the LED
for a pulled physical drive in the array after the locate action is stopped.
(For unpulled drives, the blinking stops.) This issue is not seen with
ARCCONF.
4.1.10 ARCCONF Backward Compatibility
ARCCONF is backward compatible with older Adaptec controller models. As a
result, the ARCCONF user's guide and online help show command options that are
not supported by newer Adaptec controllers, like the Adaptec Series 7 and
Adaptec Series 8 or later products.
Example: With ARCCONF SETMAXCACHE, Adaptec Series 7 and Series 8 controllers
do not support ADDTOPOOL or REMOVEFROMPOOL.
4.1.11 Updating Hard Disk Firmware on VMware Guest OS
Updating the firmware for a SAS hard disk drive with ARCCONF/maxView can crash
(PSOD) the VMware Guest OS. This issue is seen with SAS hard drives only; with
SATA drives, the firmware update completes successfully.
4.1.12 Hot Swap Issues on VMware CentOS Guest OS
Due to a limitation with the VMware CentOS Guest OS network configuration,
maxView Storage Manager does not show newly added or removed hot swap drives.
(ARCCONF sees the configuration change but maxView does not.)
WORKAROUND: (1) reboot the system or restart maxView services; (2) adjust the
network configuration; contact Adaptec Support for more information.
4.1.13 Enclosure Status Reporting
Enclosure status, in maxView Storage Manager, is event-driven. As a result,
enclosures can have a "Degraded" status even if related resources (fan,
temperature, power) are performing normally (Optimal status). For instance,
the Enclosure status changes to "Degraded" if the system reports an "Enclosure
device not responding ..." event, even if other sensor values are normal.
4.1.14 PHY Status on Enclosure Backplanes
In the Controller Properties window, maxView Storage Manager shows the
Connector Info as "unknown" for all PHYs on an enclosure-based backplane (for
instance, a backplane attached to connector 1).
4.1.15 Special Characters in Logical Device Names
Special characters are permitted in logical device names in maxView Storage
Manager, the BIOS, and ARCCONF. However, with Linux ARCCONF (create, setname),
special characters must be "escaped" to ensure proper interpretation. For
example: ARCCONF SETNAME 1 LOGICALDRIVE 1 arc_ldrive%\$12\&amp;
4.1.16 Speaker Status on SuperMicro SAS2X28 Enclosures
SuperMicro SAS2X28 enclosures do not propagate the speaker status to maxView
Storage Manager. As a result, maxView always displays the speaker status as
Off.
4.1.17 Online Help Issues
* Help from the Express Configuration wizard opens the Custom Configuration
help panel.
WORKAROUND: Open the Express Configuration Help panel from the Help System
TOC pane.
* When opening the maxView Storage Manager help from a remote Linux system
(eg, over a VPN), the help window may fail to open with a 'can't establish
connection to server' message.
WORKAROUND: Replace 127.0.0.1:8443 in the URL with <system_ip_address>:8443
* In IE11, topics in the help may display with a 'Topics Not Found' message
when their corresponding links are clicked in the navigation pane of the
help.
WORKAROUND: Click on the "Add" browser prompt to add certification to view
the content.
4.1.18 Broadcasting Alerts About Status and Activity
This feature is not supported by the maxView Storage Manager or ARCCONF and
has been removed from the product documentation.
4.1.19 User-Specified Archive Path
While executing the savesupportarchive command where a user-specified path
exists, ARCCONF will instead place the logs under the /var/log/ directory.
4.1.20 Clear Configuration Status After Re-Insertion
After removing a RAID member and then clearing the controller configuration,
maxView Storage Manager recovers the configuration for all RAID volumes and
physical drives when the offline drive is re-inserted and the OS restarted. By
design, RAID members store metadata about all other virtual devices. This
allows the controller to recover the configuration from the re-inserted drive,
even though the configuration was previously cleared.
4.1.21 Configuration Changes in Device Manager
After disabling/enabling the Microsemi Adaptec controller in the Device
Manager, it can take up to 10 minutes for maxView Storage Manager to detect
the configuration change.
WORKAROUND: Use the Refresh link in the maxView GUI to update the
configuration.
4.2 Limitations for Series 6, 7, 8 Controllers
4.2.1 RAID-Level Migrations
* The following RAID-level migrations (RLM) are supported in this release:
* RAID 0 to RAID 5
* RAID 0 to RAID 10
* RAID 5 to RAID 6
* RAID 6 to RAID 5
* RAID 10 to RAID 5
* RAID 5 to RAID 10
* RAID 1 to RAID 5
* SIMPLE VOLUME to RAID 1
* RAID 1 to SIMPLE VOLUME
* When migrating a Simple Volume to RAID 1, maxView Storage Manager reports
the logical drive state as Impacted (rather than Reconfiguring); this is
normal.
* We do not recommend performing a RAID-level migration or Online Capacity
Expansion (OCE) on a logical drive with maxCache SSD caching enabled.
NOTE: maxView Storage Manager grays out the options for logical drives with
maxCache enabled. ARCCONF terminates the task.
* Always allow a RAID-level migration to complete before creating a support
archive file. Otherwise, the support archive will include incorrect
partition information. Once the migration is complete, the partition
information will be reported correctly.
4.2.2 maxCache Device Migration
Only one maxCache Device is supported per controller. Moving the maxCache
Device (all underlying SSDs) from one controller to another (assuming both
controllers support maxCache) is supported only if (1) the new controller does
not have a maxCache Device or any other maxCache Device with a conflicting
device number and (2) only after a clean shutdown on the old controller.
4.2.3 ARCCONF maxCache Device Size Issue
ARCCONF supports >2TB maxCache Devices if you create the device with the 'max'
parameter. However, the functional limit for the maxCache Device is 2TB, which
is also the limit in maxView Storage Manager.
4.2.4 Power Management Issues
* Power management is not supported on FreeBSD.
* Capturing support logs from maxView or ARCCONF will spin up drives when
power management is active. This behavior is by design.
* The Logical Drive Creation wizard no longer includes the option to enable
power management settings.
WORKAROUND: Enable power management for the logical drive from the Set
Properties window.
4.2.5 Verify/Verify with Fix
* Incremental progress percentage information in SNMP is not updated for the
Verify/Verify_Fix operations. Task progress shows 0% until complete, then
100%.
* In maxView Storage Manager and ARCCONF, the Verify_Fix operation is NOT
available when:
1. The logical drive has a non-redundant RAID level.
2. Other tasks are in progress on the logical drive.
3. The logical drive is in a non-optimal or impacted state.
4.2.6 ATA Secure Erase
In ARCCONF, the ATA Secure Erase operation cannot be aborted. Once started, it
continues to completion.
In maxView Storage Manager, the drive is locked during ATA Secure Erase. To
recover, use the ARCCONF ATAPASSWORD CLEAR <passwd> command; the default
password is 'pmc-sierra'.
NOTE: ATA Secure Erase is also available in the Ctrl-A BIOS.
4.2.7 Series 6 Controller Issues
The following issues are seen only with Microsemi Adaptec Series 6 RAID
controllers:
* In maxView Storage Manager, the Preserve Cache option on the Set Properties
window is not supported on Series 6 RAID controllers. Attempting to set this
option for the Series 6 controller fails.
* Renaming a RAID volume disables the write-cache (if enabled). You cannot re-
enable the write-cache in maxView Storage Manager.
WORKAROUND: Use ARCCONF to enable the write-cache.
* In a VMware Guest OS under VMware 5.x, maxView Storage Manager and ARCCONF
do not detect existing logical drive partitions. As a result, attempting to
delete, clear, or erase the logical drive may fail.
* On Series 6 controllers, maxView Storage Manager deletes partitioned JBODs
without issuing a warning message.
* Series 6 controllers do not support the ARCCONF GETPERFORM command.
4.2.8 Simple Volume Support
* In this release, you can create a maximum of 128 Simple Volumes in maxView
Storage Manager, ARCCONF, or the BIOS.
* When a Simple Volume fails, the status remains unchanged after drive
replacement.
WORKAROUND: Manually delete the Simple Volume to remove it.
4.2.9 Auto-Volume Support
* Changing a controller into Auto-Volume mode (ARCCONF/BIOS) is not supported
if the configuration includes any logical device type other than Simple
Volume, including a maxCache Device. The mode switch from RAID mode to Auto-
Volume mode is blocked if any other type of logical volume exists (including
maxCache). After switching to Auto-Volume mode, you can create and delete
Simple Volumes only in maxView Storage Manager and ARCCONF.
* In Auto-Volume mode, only the first 128 RAW drives are converted to Simple
Volumes; the rest of the RAW drives remain unchanged. If you uninitialize a
Ready drive while the controller is in Auto-Volume mode, the firmware
converts the drive automatically until the Simple Volume count reaches the
maximum.
4.2.10 Hot-Removing Disk Drives on Xenserver Guest OS
XenServer does not support "hot-removal" of disk drives from a partitioned
logical drive. As a result, if you hot remove a disk from a logical drive, the
Guest OS becomes inaccessible because the drive partition remains visible to
the OS instead of being cleared.
WORKAROUND: Reboot the XenServer host, detach the failed partition, then
restart the VM.
4.2.11 Viewing Logical Drive Details After Re-Insertion
If you remove/re-insert a RAID member when the controller's "Automatic
Failover" property is enabled and there is no hot spare configured/protecting
the logical device, you must click on the Refresh link in maxView Storage
Manager to view the proper data of the re-inserted drive and RAID volume.
4.3. Limitations for Smart Family Controllers
4.3.1 SES Passthrough Commands to Expanders
SES passthrough commands to expanders fail.
4.3.2 Firmware Upgrade Issues
For systems using Adaptec HBA 1000 with an Adaptec SAS Expander 82885T card,
where the ARCCONF utility is used to upgrade the expander firmware, ARCCONF
may crash if 64-bit chunk sizes are used.
WORKAROUND: Use 32-bit chunk sizes to upgrade/downgrade the expander firmware.
4.3.3 Mount Point Information with MPIO Support
When Multipath I/O (MPIO) is enabled in Windows, mount point information is
not available in maxView or ARCCONF.
4.3.4 Locate Physical Disk LED Behavior
Since the locate commands are executed at the physical device level, the LED
that is used to locate physical disks in an array when using ARCCONF/maxView
will continue to blink the physical device(s) even after deleting the array.
--------------------------------------------------------------------
Copyright (c) 2016 Microsemi Corporation. All rights reserved. Microsemi and
the Microsemi logo are trademarks of Microsemi Corporation. All other
trademarks and service marks are the property of their respective owners.
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of
semiconductor and system solutions for communications, defense and security,
aerospace, and industrial markets. Products include high-performance and
radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs, and
ASICs; power management products; timing and synchronization devices and
precise time solutions; voice processing devices; RF solutions; discrete
components; enterprise storage and communications solutions; security
technologies and scalable anti-tamper products; Ethernet solutions; Power-
over-Ethernet ICs and midspans; custom design capabilities and services.
Microsemi is headquartered in Aliso Viejo, California and has approximately
4,800 employees world-wide. Learn more at www.microsemi.com.
PMC-2153191, Issue 3
Microsemi makes no warranty, representation, or guarantee regarding the
information contained herein or the suitability of its products and services
for any particular purpose, nor does Microsemi assume any liability whatsoever
arising out of the application or use of any product or circuit. The products
sold hereunder and any other products sold by Microsemi have been subject to
limited testing and should not be used in conjunction with mission-critical
equipment or applications. Any performance specific ations are believed to be
reliable but are not verified, and Buyer must conduct and complete all
performance and other testing of the products, alone and together with, or
installed in, any end-products. Buyer shall not rely on any data and
performance specifications or parameters provided by Microsemi. It is the
Buyer's responsibility to independently determine suitability of any products
and to test and verify the same. The information provided by Microsemi
hereunder is provided "as is, where is" and with all faults, and the entire
risk associated with such information is entirely with the Buyer. Microsemi
does not grant, explicitly or implicitly, to any party any patent rights,
licenses, or any other IP rights, whether with regard to such information
itself or anything described by such information. Information provided in this
document is proprietary to Microsemi, and Microsemi reserves the right to make
any changes to the information in this document or to any products and
services at any time without notice.
The technology discussed in this document may be protected by one or more
patent grants.

BIN
amd64/2.02/arcconf Executable file

Binary file not shown.

BIN
amd64/2.03/arcconf Executable file

Binary file not shown.

BIN
amd64/2.04/arcconf Executable file

Binary file not shown.

BIN
amd64/2.05/arcconf Executable file

Binary file not shown.

BIN
amd64/2.06/arcconf Executable file

Binary file not shown.

BIN
amd64/3.00/arcconf Executable file

Binary file not shown.

BIN
amd64/3.01/arcconf Executable file

Binary file not shown.

BIN
amd64/3.02/arcconf Executable file

Binary file not shown.

BIN
amd64/3.03/arcconf Executable file

Binary file not shown.

BIN
amd64/4.30/arcconf Executable file

Binary file not shown.

678
amd64/7.31/README.TXT Normal file
View File

@ -0,0 +1,678 @@
--------------------------------------------------------------------
README.TXT
Adaptec Storage Manager (ASM)
as of May 7, 2012
--------------------------------------------------------------------
Please review this file for important information about issues
and erratas that were discovered after completion of the standard
product documentation. In the case of conflict between various
parts of the documentation set, this file contains the most
current information.
The following information is available in this file:
1. Software Versions and Documentation
1.1 Adaptec Storage Manager
1.2 Documentation
2. Installation and Setup Notes
2.1 Supported Operating Systems
2.2 Minimum System Requirements
2.3 General Setup Notes
2.4 Linux Setup Notes
2.5 Debian Linux Setup Notes
3. General Cautions and Notes
3.1 General Cautions
3.2 General Notes
4. Operating System-Specific Issues and Notes
4.1 Windows - All
4.2 Windows 64-Bit
4.3 Linux
4.4 Debian and Ubuntu
4.5 FreeBSD
4.6 Fedora and FreeBSD
4.7 Linux and FreeBSD
4.8 VMware
5. RAID Level-Specific Notes
5.1 RAID 1 and RAID 5 Notes
5.2 RAID 10 Notes
5.3 RAID x0 Notes
5.4 RAID Volume Notes
5.5 JBOD Notes
5.6 Hybrid RAID Notes
5.7 RAID-Level Migration Notes
6. Power Management Issues and Notes
7. "Call Home" Issues and Notes
8. ARCCONF Issues and Notes
9. Other Issues and Notes
--------------------------------------------------------------------
1. Software Versions and Documentation
1.1. Adaptec Storage Manager Version 7.3.1, ARCCONF Version 7.3.1
1.2. Documentation on this DVD
PDF format*:
- Adaptec Storage Manager User's Guide
- Adaptec RAID Controller Command Line Utility User's Guide
*Requires Adobe Acrobat Reader 4.0 or later
HTML and text format:
- Adaptec Storage Manager Online Help
- Adaptec Storage Manager README.TXT file
--------------------------------------------------------------------
2. Installation and Setup Notes
- The Adaptec Storage Manager User's Guide contains complete installation
instructions for the Adaptec Storage Manager software. The Adaptec
RAID Controllers Command Line Utility User's Guide contains
complete installation instructions for ARCCONF, Remote ARCCONF,
and the Adaptec CIM Provider. The Adaptec RAID Controllers
Installation and User's Guide contains complete installation
instructions for Adaptec RAID controllers and drivers.
2.1 Supported Operating Systems
- Microsoft Windows*:
o Windows Server 2008, 32-bit and 64-bit
o Windows Server 2008 R2, 64-bit
o Windows SBS 2011, 32-bit and 64-bit
o Windows Storage Server 2008 R2, 32-bit and 64-bit
o Windows Storage Server 2011, 32-bit and 64-bit
o Windows 7, 32-bit and 64-bit
*Out-of-box and current service pack
- Linux:
o Red Hat Enterprise Linux 5.7, 6.1, IA-32 and x64
o SuSE Linux Enterprise Server 10, 11, IA-32 and x64
o Debian Linux 5.0.7, 6.0 IA-32 and x64
o Ubuntu Linux 10.10, 11.10, IA-32 and x64
o Fedora Linux 14, 15, 16 IA-32 and x64
o Cent OS 5.7, 6.2, IA-32 and x64
o VMware ESXi 5.0, VMware ESX 4.1 Classic (Agent only)
- Solaris:
o Solaris 10,
o Solaris 11 Express
- FreeBSD:
o FreeBSD 7.4, 8.2
2.2 Minimum System Requirements
o Pentium Compatible 1.2 GHz processor, or equivalent
o 512 MB RAM
o 135 MB hard disk drive space
o Greater than 256 color video mode
2.3 General Setup Notes
- You can configure Adaptec Storage Manager settings on other
servers exactly as they are configured on one server. To
replicate the Adaptec Storage Manager Enterprise view tree
and notification list, do the following:
1. Install Adaptec Storage Manager on one server.
2. Start Adaptec Storage Manager. Using the 'Add remote system'
action, define the servers for your tree.
3. Open the Notification Manager. Using the 'Add system'
action, define the notification list.
4. Exit Adaptec Storage Manager.
5. Copy the following files onto a diskette from the directory
where the Adaptec Storage Manager is installed:
RaidMSys.ser --> to replicate the tree
RaidNLst.ser --> to replicate the notification list
RaidSMTP.ser --> to replicate the SMTP e-mail notification list
RaidJob.ser --> to replicate the jobs in the Task Scheduler
6. Install Adaptec Storage Manager on the other servers.
7. Copy the files from the diskette into the directory where
Adaptec Storage Manager is installed on the other servers.
2.4 Linux Setup Notes
- Because the RPM for Red Hat Enterprise Linux 5 is unsigned, the
installer reports that the package is "Unsigned, Malicious Software".
Ignore the message and continue the installation.
- To run Adaptec Storage Manager under Red Hat Enterprise Linux for
x64, the Standard installation with "Compatibility Arch Support"
is required.
- To install Adaptec Storage Manager on Red Hat Enterprise Linux,
you must install two packages from the Red Hat installation CD:
o compat-libstdc++-7.3-2.96.122.i386.rpm
o compat-libstdc++--devel-7.3-2.96.122.i386.rpm
NOTE: The version string in the file name may be different
from above. Be sure to check the version string on the
Red Hat CD.
For example, type:
rpm --install /mnt/compat-libstdc++-7.3-2.96.122.i386.rpm
where mnt is the mount point of the CD-ROM drive.
- To install Adaptec Storage Manager on Red Hat Enterprise Linux 5,
you must install one of these packages from the Red Hat
installation CD:
o libXp-1.0.0-8.i386.rpm (32-Bit)
o libXp-1.0.0-8.x86.rpm (64-Bit)
- To install Adaptec Storage Manager on SuSE Linux Enterprise
Desktop 9, Service Pack 1, for 64-bit systems, you must install
two packages from the SuSE Linux installation CD:
- liblcms-devel-1.12-55.2.x86_64.rpm
- compat-32bit-9-200502081830.x86_64.rpm
NOTE: The version string in the file name may be different
from above. Be sure to check the version string on the
installation CD.
- To enable ASM's hard drive firmware update feature on RHEL 64-bit
systems, you must ensure that the "sg" module is loaded in the
kernel. To load the module manually (if it is not loaded already),
use the command "modprobe sg".
2.5 Debian Linux Setup Notes
- You can use the ASM GUI on Debian Linux 5.x only if you install
the GNOME desktop. Due to a compatibility issue with X11, the
default KDE desktop is not supported in this release.
- To ensure that the ASM Agent starts automatically when Debian
is rebooted, you must update the default start and stop values
in /etc/init.d/stor_agent, as follows:
·[Original]
# Default-Start: 2 3 5
# Default-Stop: 0 1 2 6
·[Modification]
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
To activate the changes, execute 'insserv stor_agent', as root.
--------------------------------------------------------------------
3. Adaptec Storage Manager General Cautions and Notes
3.1 General Cautions
- This release supports a maximum of 8 concurrent online capacity
expansion (OCE) tasks in the RAID array migration wizard.
- While building or clearing a logical drive, do not remove and
re-insert any drive from that logical drive. Doing so may cause
unpredictable results.
- Do not move disks comprising a logical drive from one controller
to another while the power is on. Doing so could cause the loss of
the logical drive configuration or data, or both. Instead, power
off both affected controllers, move the drives, and then restart.
- When using Adaptec Storage Manager and the CLI concurrently,
configuration changes may not appear in the Adaptec Storage
Manager GUI until you refresh the display (by pressing F5).
3.2 General Notes
- Adaptec Storage Manager requires the following range of ports
to be open for remote access: 34570-34580 (TCP), 34570 (UDP),
34577-34580 (UDP).
- Adaptec Storage Manager generates log files automatically to
assist in tracking system activity. The log files are
created in the directory where Adaptec Storage Manager is
installed.
o RaidEvt.log - Contains the information reported in
Adaptec Storage Manager event viewer for all
local and remote systems.
o RaidEvtA.log - Contains the information reported in
Adaptec Storage Manager event viewer for the
local system.
o RaidNot.log - Contains the information reported in the
Notification Manager event viewer.
o RaidErr.log - Contains Java messages generated by
Adaptec Storage Manager.
o RaidErrA.log - Contains Java messages generated by the
Adaptec Storage Manager agent.
o RaidCall.log - Contains the information reported when
statistics logging is enabled in ASM.
Information written to these files is appended to the existing
files to maintain a history. However, when an error log file
reaches a size of 5 Mbytes, it is copied to a new file with
the extension .1 and the original (that is, the .LOG file) is
deleted and recreated. For other log files, a .1 file is created
when the .LOG file reaches a size of 1 Mbyte. If a .1 file already
exists, the existing .1 file is destroyed.
- In the Event viewer, Adaptec Storage Manager reports both the
initial build task for a logical drive and a subsequent Verify/Fix
as a "Build/Verify" task.
- When displaying information about a physical device, the device,
vendor and model information may be displayed incorrectly.
- After using a hot spare to successfully rebuild a redundant
logical drive, Adaptec Storage Manager will continue to
show the drive as a global hot spare. To remove the hot spare
designation, delete it in Adaptec Storage Manager.
--------------------------------------------------------------------
4. Operating System-Specific Issues and Notes
4.1 Windows - All
- The Java Virtual Machine has a problem with the 256-color
palette. (The Adaptec Storage Manager display may be distorted
or hard to read.) Set the Display Properties Settings to a
color mode with greater than 256 colors.
- When you shut down Windows, you might see the message
"unexpected shutdown". Windows displays this message if the
Adaptec Storage Manager Agent fails to exit within 3 seconds.
It has no effect on file I/O or other system operations and can
be ignored.
4.2 Windows 64-Bit
- Adaptec RAID controllers do not produce an audible alarm on the
following 64-bit Windows operating systems:
o Windows Server 2003 x64 Edition (all versions)
4.3 Linux
- When you delete a logical drive, the operating system can no longer
see the last logical drive. WORKAROUND: To allow Linux to see the
last logical drive, restart your system.
- The controller does not support attached CD drives during OS
installation.
- On certain versions of Linux, you may see messages concerning font
conversion errors. Font configuration under X-Windows is a known
JVM problem. It does not affect the proper operation of the
Adaptec Storage Manager software. To suppress these messages,
add the following line to your .Xdefaults file:
stringConversionWarnings: False
4.4 Debian and Ubuntu
- To create logical drives on Debian and Ubuntu installations, you
must log in as root. It is not sufficient to start ASM with the
'sudo /usr/StorMan/StorMan.sh' command (when not logged in as
root). WORKAROUND: To create logical drives on Ubuntu when not
logged in as root, install the package 'sudo dpkg -i storm_6.50-15645_amd64.deb'.
4.5 FreeBSD
- On FreeBSD systems, JBOD disks created with Adaptec Storage Manager
are not immediately available to the OS. You must reboot the
system before you can use the JBOD.
4.6 Fedora and FreeBSD
- Due to an issue with the Java JDialog Swing class, the 'Close'
button may not appear on some Adaptec Storage Manager windows
or dialog boxes under FreeBSD or Fedora Linux 15 or higher.
WORKAROUND: Press ALT+F4 or right-click on the title bar, then
close the dialog box from the pop-up menu.
4.7 Linux and FreeBSD
- If you cannot connect to a local or remote Adaptec Storage Manager
installed on a Linux or FreeBSD system, verify that the TCP/IP hosts
file is configured properly.
1. Open the /etc/hosts file.
NOTE: The following is an example:
127.0.0.1 localhost.localdomain localhost matrix
2. If the hostname of the system is identified on the line
with 127.0.0.1, you must create a new host line.
3. Remove the hostname from the 127.0.0.1 line.
NOTE: The following is an example:
127.0.0.1 localhost.localdomain localhost
4. On a new line, type the IP address of the system.
5. Using the Tab key, tab to the second column and enter the
fully qualified hostname.
6. Using the Tab key, tab to the third column and enter the
nickname for the system.
NOTE: The following is an example of a completed line:
1.1.1.1 matrix.localdomain matrix
where 1.1.1.1 is the IP address of the server and
matrix is the hostname of the server.
7. Restart the server for the changes to take effect.
4.8 VMware
- If you are unable to connect to VMware ESX Server from a
remote ASM GUI, even though it appears in the Enterprise
View as a remote system, most likely, some required ports
are open and others are not. (The VMware ESX firewall blocks
most ports, by default.) Check to make sure that all ports
34570 thru 34581 are opened on the ESX server.
- After making array configuration changes in VMware, you must
run the "esxcfg-rescan" tool manually at the VMware console
to notify the operating system of the new target characteristics
and/or availability. Alternatively, you can rescan from the
Virtual Infrastructure Client: click on the host in the left
panel, select the Configuration tab, choose "Storage Adapters",
then, on the right side of the screen, click "Rescan".
- With VMware ESX 4.1, the OS command 'esxcfg-scsidevs -a'
incorrectly identifies the Adaptec ASR-5445 controller as
"Adaptec ASR5800". (ASM itself identifies the controller
correctly.) To verify the controller name at the OS level,
use this command to check the /proc file system:
# cat /proc/scsi/aacraid/<Node #>
where <Node #> is 1, 2, 3 etc.
--------------------------------------------------------------------
5. RAID Level-Specific Notes
5.1 RAID 1 and RAID 5 Notes
- During a logical device migration from RAID 1 or RAID 5 to
RAID 0, if the original logical drive had a spare drive
attached, the resulting RAID 0 retains the spare drive.
Since RAID 0 is not redundant, you can remove the hot spare.
5.2 RAID 10 Notes
- If you force online a failed RAID 10, ASM erroneously shows two
drives rebuilding (the two underlying member drives), not one.
- You cannot change the priority of a RAID 10 verify. Setting
the priority at the start of a verify has no effect. The
priority is still shown as high. Changing the priority of
a running verify on a RAID-10 changes the displayed priority
until a rescan is done, then the priority shows as high again.
- Performing a Verify or Verify/Fix on an RAID 10 displays the
same message text in the event log: "Build/Verify started on
second level logical drive of 'LogicalDrive_0.'" You may see the
message three times for a Verify, but only once for a Verify/Fix.
5.3 RAID x0 Notes
- To create a RAID x0 with an odd number of drives (15, 25, etc),
specify an odd number of second-level devices in the Advanced
settings for the array. For a 25 drive RAID 50, for instance,
the default is 24 drives.
NOTE: This differs from the BIOS utility, which creates RAID x0
arrays with an odd number of drives by default.
- After building or verifying a leg of a second-level logical drive,
the status of the second-level logical drive is displayed as a
"Quick Initialized" drive.
5.4 RAID Volume Notes
- In ASM, a failed RAID Volume comprised of two RAID 1 logical
drives is erroneously reported as a failed RAID 10. A failed
RAID Volume comprised of two RAID 5 logical drives is
erroneously reported as a failed RAID 50.
5.5 JBOD Notes
- In this release, ASM deletes partitioned JBODs without issuing
a warning message.
- When migrating a JBOD to a Simple Volume, the disk must be quiescent
(no I/O load). Otherwise, the migration will fail with an I/O Read
error.
5.6 Hybrid RAID Notes
- ASM supports Hybrid RAID 1 and RAID 10 logical drives comprised
of hard disk drives and Solid State Drives (SSDs). For a Hybrid
RAID 10, you must select an equal number of SSDs and HDDs in
“every other drive” order, that is: SSD—HDD—SSD—HDD, and so on.
Failure to select drives in this order creates a standard
logical drive that does not take advantage of SSD performance.
5.7 RAID-Level Migration (RLM) Notes
- We strongly recommend that you use the default 256KB stripe
size for all RAID-level migrations. Choosing a different stripe
size may crash the system.
- If a disk error occurs when migrating a 2TB RAID 0 to RAID 5
(eg, bad blocks), ASM displays a message that the RAID 5 drive
is reconfiguring even though the migration failed and no
RAID-level migration task is running. To recreate the
logical drive, fix or replace the bad disk, delete the RAID 5
in ASM, then try again.
- When migrating a RAID 5EE, be careful not to remove and re-insert
a drive in the array. If you do, the drive will not be included
when the array is rebuilt. The migration will stop and the drive
will be reported as Ready (not part of array).
NOTE: We strongly recommend that you do not remove and re-insert
any drive during a RAID-level migration.
- When migrating a RAID 6 to a RAID 5, the migration will fail if
the (physical) drive order on the target logical device differs
from the source; for instance, migrating a four-drive RAID 6 to
a three-drive RAID 5.
- Migrating a RAID 5 with greater than 2TB capacity to RAID 6 or
RAID 10 is not supported in this release. Doing so may crash
the system.
- When migrating from a RAID 0 to any redundant logical drive,
like RAID 5 or 10, Adaptec Storage Manager shows the status as
"Degraded Reconfiguring" for a moment, then the status changes
to "Reconfiguring." The "Degraded" status does not appear in
the event log.
- The following RAID-level migrations and online capacity
expansions (OCE) are NOT supported:
o RAID 50 to RAID 5 RLM
o RAID 60 to RAID 6 RLM
o RAID 50 to RAID 60 OCE
- During a RAID-level migration, ASM and the BIOS utility show
different RAID levels while the migration is in progress. ASM shows
the target RAID level; the BIOS utility shows the current RAID level.
- If a disk error occurs during a RAID-level migration (eg, bad blocks),
the exception is reported in the ASM event viewer (bottom pane)
and in the support archive file (Support.zip, Controller 1 logs.txt),
but not in the main ASM Event Log file, RaidEvtA.log.
- Always allow a RAID-level migration to complete before gathering
support archive information in Support.zip. Otherwise, the Support.zip
file will include incorrect partition information. Once the RLM is
complete, the partition information will be reported correctly.
--------------------------------------------------------------------
6. Power Management Issues and Notes
- You must use a compatible combination of Adaptec Storage Manager
and controller firmware and driver software to use the power
management feature. All software components must support power
management. You can download the latest controller firmware
and drivers from the Adaptec Web site at www.adaptec.com.
- Power management is not supported under FreeBSD.
- Power management settings apply only to logical drives in the
Optimal state. If you change the power settings on a Failed
logical drive, then force the drive online, the previous
settings are reinstated.
- After setting power values for a logical drive in ARCCONF, the
settings are not updated in the Adaptec Storage Manager GUI.
--------------------------------------------------------------------
7. "Call Home" Issues and Notes
- The Call Home feature is not supported in this release. To gather
statistics about your system for remote analysis, enable statistics
logging in ASM, then create a Call Home Support Archive. For more
information, see the user's guide.
--------------------------------------------------------------------
8. ARCCONF Issues and Notes
- With VMware ESX 4.1, you cannot delete a logical drive
with ARCCONF. WORKAROUND: Connect to the VMware machine from a
remote ASM GUI, then delete the logical drive.
- With Linux kernel versions 2.4 and 2.6, the ARCCONF
DELETE <logical_drive> command may fail with a Kernel Oops
error message. Even though the drives are removed from the
Adaptec Storage Manager GUI, they may not really be deleted.
Reboot the controller; then, issue the ARCCONF DELETE command
again.
--------------------------------------------------------------------
9. Other Issues and Notes
- Some solid state drives identify themselves as ROTATING media.
As a result, these SSDs:
o Appear as SATA drives in the ASM Physical Devices View
o Cannot be used as Adaptec maxCache devices
o Cannot be used within a hybrid RAID array (comprised of
SSDs and hard disks)
- The blink pattern on Adaptec Series 6/6Q/6E/6T controllers differs
from Series 2 and Series 5 controllers:
o When blinking drives in ASM, the red LED goes on and stays solid;
on Series 2 and 5 controllers, the LED blinks on and off.
o When failing drives in ASM (using the 'Set drive state to failed'
action), the LED remains off; on Series 2 and 5 controllers, the
LED goes on and remains solid.
- Cache settings for RAID Volumes (Read cache, Write cache, maxCache)
have no effect. The cache settings for the underlying logical
devices take priority.
- On rare occasions, ASM will report invalid medium error counts on
a SATA hard drive or SSD. To correct the problem, use ARCCONF to
clear the device counts. The command is:
arcconf getlogs <Controller_ID> DEVICE clear
- On rare occasions, ASM lists direct-attached hard drives and SSDs
as drives in a virtual SGPIO enclosure. Normally, the drives are
listed in the Physical Devices View under ports CN0 and CN1.
- Hard Drive Firmware Update Wizard:
o Firmware upgrade on Western Digital WD5002ABYS-01B1B0 hard drives
is not supported for packet sizes below 2K (512/1024).
o After flashing the firmware of a Seagate Barracuda ES ST3750640NS
hard drive, you MUST cycle the power before ASM will show the new
image. You can pull out and re-insert the drive; power cycle the
enclosure; or power cycle the system if the drive is attached directly.
- Secure Erase:
o If you reboot the system while a Secure Erase operation is in
progress, the affected drive may not be displayed in Adaptec
Storage Manager or other Adaptec utilities, such as the ACU.
o You can perform a Secure Erase on a Solid State Drive (SSD) to
remove the metadata. However, the drive will move to the Failed
state when you reboot the system. To use the SSD, reboot to
the BIOS, then initialize the SSD. After initialization, the SSD
will return to the Ready state. (A SSD in the Failed state cannot
be initialized in ASM.)
- The Repair option in the ASM Setup program may fail to fix a
corrupted installation, depending on which files are affected.
The repair operation completes successfully, but the software
remains unfixed.
- Adaptec Storage Manager may fail to exit properly when you create
64 logical devices in the wizard. The logical devices are still
created, however.
- The "Clear logs on all controllers" action does not clear events
in the ASM Event Viewer (GUI). It clears device events, defunct
drive events, and controller events in the controllers' log files.
To clear events in the lower pane of the GUI, select Clear
configuration event viewer from the File menu.
- Stripe Size Limits for Large Logical Drives:
The stripe size limit for logical drives with more than 8 hard
drives is 512KB; for logical drives with more than 16 hard
drives it is 256KB.
- Agent Crashes when Hot-Plugging an Enclosure:
With one or more logical drives on an enclosure, removing
the enclosure cable from the controller side may crash
the ASM Agent.
--------------------------------------------------------------------
(c) 2012 PMC-Sierra, Inc. All Rights Reserved.
This software is protected under international copyright laws and
treaties. It may only be used in accordance with the terms
of its accompanying license agreement.
The information in this document is proprietary and confidential to
PMC-Sierra, Inc., and for its customers' internal use. In any event,
no part of this document may be reproduced or redistributed in any
form without the express written consent of PMC-Sierra, Inc.,
1380 Bordeaux Drive, Sunnyvale, CA 94089.
P/N DOC-01700-02-A Rev A

BIN
amd64/7.31/arcconf Executable file

Binary file not shown.

BIN
amd64/7.31/libstdc++.so.5 Executable file

Binary file not shown.

View File

@ -0,0 +1 @@
libstdc++.so.6.0.8

BIN
amd64/centos5/libstdc++.so.6.0.8 Executable file

Binary file not shown.

Binary file not shown.

View File

@ -1 +0,0 @@
6455985a1ce492a8d89b602f9e7663602b815a43

Binary file not shown.

View File

@ -1 +0,0 @@
b2c7e4e3926e1251a81ed1ffdfded410842377f7

Binary file not shown.

View File

@ -1 +0,0 @@
525eaf69e115059fb1210db1a2597eadc34f2413

Binary file not shown.

View File

@ -1 +0,0 @@
ba15fa23eac215b711d713a73fba9a0cc15391fa

Binary file not shown.

View File

@ -1 +0,0 @@
ba15fa23eac215b711d713a73fba9a0cc15391fa

Binary file not shown.

View File

@ -1 +0,0 @@
f4c596b9af3a8e2d71b67b9b275f12111daa2992

Binary file not shown.

View File

@ -1 +0,0 @@
423b71ae95e74b7812961a7eaba3d8cb41b46c5a

Binary file not shown.

View File

@ -1 +0,0 @@
ea2c84be2cbf46d1ff6774e4550fd6b12b873963

Binary file not shown.

View File

@ -1 +0,0 @@
ee3c07ca0ee088633c414d9d6ff4920cb999768a

Binary file not shown.

View File

@ -1 +0,0 @@
e6556d24736aaeda71c0d3f2c6117a13f3b7de10

Binary file not shown.

View File

@ -1 +0,0 @@
5cc091115dd8f93d9b103a7053e2ce3cb6215ca9

102
build_orig.sh Normal file
View File

@ -0,0 +1,102 @@
#!/bin/bash
# the directory of the script
DIR=`cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd`
echo "Working directory $DIR"
# the temp directory used, within $DIR
WORK_DIR=`mktemp -d -p "$DIR"`
echo "Creating temp working directory $WORK_DIR"
# deletes the temp directory
function cleanup {
rm -rf "$WORK_DIR"
echo "Deleted temp working directory $WORK_DIR"
}
# register the cleanup function to be called on the EXIT signal
trap cleanup EXIT
# Download Files specified in files.diz
while IFS=! read type app version outputfile url md5 realver
do
echo "Downloading $app Version: $version"
#use -O for output file. define $outputfile yourself
wget -c --no-check-certificate --tries=1 -O $DIR/../$outputfile --timeout=5 "$url"
# use $(..) instead of backticks.
calculated_md5=$(md5sum "$DIR/../$outputfile" | cut -f 1 -d " ")
# compare md5
case "$calculated_md5" in
"$md5" )
echo "$DIR/../$outputfile md5 ok"
;;
*)
echo "$DIR/../$outputfile md5 NOT ok"
exit 1
;;
esac
done < "$DIR/files.diz"
# Extract to specified dir and set some variables
while IFS=! read type app version outputfile url md5 realver
do
mkdir -p $WORK_DIR/${type}/${realver}
pushd $WORK_DIR/${type}/${realver}
unzip $DIR/../$outputfile
tar -zxf $DIR/../$outputfile
rpm2cpio $DIR/../$outputfile | cpio -idmv
rpm2cpio manager/*.x86_64.rpm | cpio -idmv
rpm2cpio manager/*.i386.rpm | cpio -idmv
popd
mkdir -p $WORK_DIR/${app}-${version}/${type}/${realver}
pushd $WORK_DIR/${app}-${version}/${type}/${realver}
case "${type}" in
"amd64" )
mv $WORK_DIR/${type}/${realver}/linux_x64/cmdline/arcconf .
mv $WORK_DIR/${type}/${realver}/linux_x64/arcconf .
mv $WORK_DIR/${type}/${realver}/usr/lib64/lib* .
mv $WORK_DIR/${type}/${realver}/usr/StorMan/arcconf .
mv $WORK_DIR/${type}/${realver}/usr/StorMan/libstdc* .
chmod +x arcconf
dos2unix $WORK_DIR/${type}/${realver}/linux_x64/cmdline/*.{txt,TXT}
mv $WORK_DIR/${type}/${realver}/linux_x64/cmdline/*.{txt,TXT} .
dos2unix $WORK_DIR/${type}/${realver}/usr/StorMan/*.{txt,TXT}
mv $WORK_DIR/${type}/${realver}/usr/StorMan/*.{txt,TXT} .
;;
"i386" )
mv $WORK_DIR/${type}/${realver}/linux/cmdline/arcconf .
mv $WORK_DIR/${type}/${realver}/usr/lib/lib* .
mv $WORK_DIR/${type}/${realver}/usr/StorMan/arcconf .
mv $WORK_DIR/${type}/${realver}/usr/StorMan/libstdc* .
chmod +x arcconf
dos2unix $WORK_DIR/${type}/${realver}/linux/cmdline/*.{txt,TXT}
mv $WORK_DIR/${type}/${realver}/linux/cmdline/*.{txt,TXT} .
dos2unix $WORK_DIR/${type}/${realver}/usr/StorMan/*.{txt,TXT}
mv $WORK_DIR/${type}/${realver}/usr/StorMan/*.{txt,TXT} .
;;
*)
echo "Wrong arch"
exit 1
;;
esac
echo "${app}_${version}.orig.tar.gz" > $WORK_DIR/filename.txt
echo "${app}-${version}" > $WORK_DIR/dirname.txt
echo "${version}" > $WORK_DIR/version.txt
popd
done < "$DIR/files.diz"
FILENAME=`cat $WORK_DIR/filename.txt`
DIRNAME=`cat $WORK_DIR/dirname.txt`
echo "Creating $DIR/../$FILENAME "
pushd $WORK_DIR
tar -czf $DIR/../$FILENAME $DIRNAME
popd
VER=`cat $WORK_DIR/version.txt`
echo "Importing $DIR/../$FILENAME as $VER into git"
#exit 1
cleanup
gbp import-orig --pristine-tar -u $VER $DIR/../$FILENAME
exit 0

14
debian/README.source vendored Normal file
View File

@ -0,0 +1,14 @@
arcconf-2.02 (1:2.02.22404-1) unstable; urgency=low
Sources have been repacked from the following upstream archive:
373126b8d256aa76022906145a87d398 arcconf_v2_02_22404.zip
Upstream licence has been reformated using the following command:
cat /tmp/1 | sed 's!$!\n!' | \
sed "s|Bureau of Industry and Security's Lists to Check|http://www.bis.doc.gov/ComplianceAndEnforcement/ListsToCheck.htm|" | \
awk 'NR==1 || NF || prvNF {print} {prvNF=NF}' | sed 's!^$!.!' | \
vim - -c '%!fold -s -w76' -c '%s/^/ /'
-- Reto Kaiser (njam) <reto@cargomedia.ch> Thu Mar 20 14:32:12 UTC 2014

5
debian/arcconf.wrapper32 vendored Normal file
View File

@ -0,0 +1,5 @@
#!/bin/sh
LD_LIBRARY_PATH=/usr/lib/arcconf:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
#exec /usr/bin/linux32 --uname-2.6 /usr/lib/arcconf/arcconf $@
exec /usr/lib/arcconf/arcconf $@

5
debian/arcconf.wrapper64 vendored Normal file
View File

@ -0,0 +1,5 @@
#!/bin/sh
LD_LIBRARY_PATH=/usr/lib/arcconf:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
#exec /usr/bin/linux64 --uname-2.6 /usr/lib/arcconf/arcconf $@
exec /usr/lib/arcconf/arcconf $@

26
debian/changelog vendored Normal file
View File

@ -0,0 +1,26 @@
arcconf (3.03.1-1) UNRELEASED; urgency=medium
* new integrated version
* add old 7.31 version of arcconf for compatiility
* add old version 4.30 for compatibility
* Bump to 2.06
* Bump to 3.00
* add missing 3.00 to package
* Bump to 3.01
* Bump to 3.02
* Bump to 3.03
-- Mario Fetka <mario.fetka@gmail.com> Tue, 13 Aug 2019 15:05:02 +0200
arcconf (2.05.1) UNRELEASED; urgency=medium
* Non-maintainer upload.
* new integrated version
-- Mario Fetka <mario.fetka@gmail.com> Tue, 31 Oct 2017 17:14:13 +0100
arcconf (2.02.22404-1) unstable; urgency=low
* Initial release.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Thu, 20 Mar 2014 09:00:00 +0200

1
debian/compat vendored Normal file
View File

@ -0,0 +1 @@
7

46
debian/control vendored Normal file
View File

@ -0,0 +1,46 @@
Source: arcconf
Section: admin
Priority: optional
Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
Build-Depends: debhelper (>= 5), libc6-i386 | atop
Standards-Version: 3.9.3
Package: arcconf
Architecture: amd64 i386
Depends: ${misc:Depends}, ${shlibs:Depends}
Provides: arcconf-1.05, arcconf-1.07, arcconf-1.08, arcconf-2.02
Conflicts: arcconf-1.05, arcconf-1.07, arcconf-1.08, arcconf-2.02
Replaces: arcconf-1.05, arcconf-1.07, arcconf-1.08, arcconf-2.02
Description: Adaptec ARCCONF command line tool
Compatible Products:
.
Adaptec RAID 6405E
Adaptec RAID 6405T
Adaptec RAID 6445
Adaptec RAID 6805
Adaptec RAID 6805E
Adaptec RAID 6805Q
Adaptec RAID 6805T
Adaptec RAID 6805TQ
Adaptec RAID 7805
Adaptec RAID 7805Q
Adaptec RAID 71605
Adaptec RAID 71605E
Adaptec RAID 71605Q
Adaptec RAID 71685
Adaptec RAID 72405
Adaptec RAID 78165
Adaptec RAID 8405
Adaptec RAID 8405E
Adaptec RAID 8805
Adaptec RAID 8805E
Adaptec RAID 8885
Adaptec RAID 8885Q
Adaptec RAID 81605Z
Adaptec RAID 81605ZQ
PMC Adaptec HBA 1000-8e
PMC Adaptec HBA 1000-8i
PMC Adaptec HBA 1000-8i8e
PMC Adaptec HBA 1000-16e
PMC Adaptec HBA 1000-16i
Adaptec SAS Expander 82885T

46
debian/control.in vendored Normal file
View File

@ -0,0 +1,46 @@
Source: arcconf
Section: admin
Priority: optional
Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
Build-Depends: debhelper (>= 5), @BUILD_DEPENDS@
Standards-Version: 3.9.3
Package: arcconf
Architecture: amd64 i386
Depends: ${misc:Depends}, ${shlibs:Depends}
Provides: arcconf-1.05, arcconf-1.07, arcconf-1.08, arcconf-2.02
Conflicts: arcconf-1.05, arcconf-1.07, arcconf-1.08, arcconf-2.02
Replaces: arcconf-1.05, arcconf-1.07, arcconf-1.08, arcconf-2.02
Description: Adaptec ARCCONF command line tool
Compatible Products:
.
Adaptec RAID 6405E
Adaptec RAID 6405T
Adaptec RAID 6445
Adaptec RAID 6805
Adaptec RAID 6805E
Adaptec RAID 6805Q
Adaptec RAID 6805T
Adaptec RAID 6805TQ
Adaptec RAID 7805
Adaptec RAID 7805Q
Adaptec RAID 71605
Adaptec RAID 71605E
Adaptec RAID 71605Q
Adaptec RAID 71685
Adaptec RAID 72405
Adaptec RAID 78165
Adaptec RAID 8405
Adaptec RAID 8405E
Adaptec RAID 8805
Adaptec RAID 8805E
Adaptec RAID 8885
Adaptec RAID 8885Q
Adaptec RAID 81605Z
Adaptec RAID 81605ZQ
PMC Adaptec HBA 1000-8e
PMC Adaptec HBA 1000-8i
PMC Adaptec HBA 1000-8i8e
PMC Adaptec HBA 1000-16e
PMC Adaptec HBA 1000-16i
Adaptec SAS Expander 82885T

215
debian/copyright vendored Normal file
View File

@ -0,0 +1,215 @@
Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: arcconf
Source: http://storage.microsemi.com/en-us/speed/raid/storage_manager/arcconf_v2_02_22404_zip.php
Files: debian/*
Copyright: Copyright (C) 2016 Adam Cecile (Le_Vert) <gandalf@le-vert.net>
License: GPL-3.0+
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
.
This package is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
.
On Debian systems, the complete text of the GNU General
Public License version 3 can be found in "/usr/share/common-licenses/GPL-3".
Files: *
Copyright: Copyright (C) 2003-2012 Adaptec by PMC
License: Proprietary
Microsemi Corporation
Microsemi Adaptec Downloadable Files:
.
This License is granted by Microsemi Corporation, referred to in this
License as "PMC-Sierra" or "ADAPTEC Inc" or "ADAPTEC" or "we" or "us."
Microsemi reserves the right to record all activities and to use any
information obtained in accordance with the privacy policy which you can
access below.
.
Directions to Obtain Your File:
.
CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS AS WELL AS THE EXPORT
COMPLIANCE REQUIREMENTS SET OUT BELOW. YOU MUST ANSWER THE REQUIRED
QUESTION TRUTHFULLY TO LET US KNOW WHETHER YOU HAVE READ AND UNDERSTOOD THE
TERMS AND CONDITIONS AND EXPORT COMPLIANCE REQUIREMENTS AND WHETHER YOU
AGREE TO COMPLY. YOU MUST CLICK A FURTHER BUTTON TO CONFIRM YOUR ANSWER AND
IF YOU ANSWER IN THE AFFIRMATIVE, A BINDING LICENSE AGREEMENT ("LICENSE")
WILL BE CONCLUDED BETWEEN US. YOU MAY THEN PROCEED TO DOWNLOAD THE SOFTWARE.
.
IF YOU DO NOT AGREE TO THESE TERMS, CONDITIONS, AND EXPORT COMPLIANCE
REQUIREMENTS THEN DO NOT DOWNLOAD THE SOFTWARE. IF YOU WISH TO CANCEL THIS
LICENSE AT ANY TIME YOU MAY DO SO BY DESTROYING ALL COPIES AND PARTIAL
COPIES OF THE SOFTWARE WHICH YOU HAVE DOWNLOADED.
.
YOU ALSO AGREE THAT YOU HAVE ALL NECESSARY INFORMATION IN ORDER TO ENTER
INTO THIS LICENSE WHETHER UNDER AN APPLICABLE EUROPEAN E-COMMERCE DIRECTIVE
OR OTHERWISE. IF YOU DO NOT AGREE TO THESE TERMS, CONDITIONS, AND
REQUIREMENTS, DO NOT DOWNLOAD ANY FILES.
.
Please retain a copy of the License for your files or you may contact
ADAPTEC's Legal Department at the address listed below for a further copy.
This license may be concluded in English or the language in which it is
drafted by ADAPTEC and appears to you online, as applicable. If you are a
consumer residing in Europe (a "European Consumer") then this License shall
not affect your statutory rights under the local laws in Europe.
.
This License grants you a non-exclusive license to use the ADAPTEC Software
and related documentation ("Software") on the following terms, conditions,
and export compliance requirements:
.
If you are NOT an individual consumer residing in Europe then the following
terms, conditions and export compliance requirements apply and are a part
of your license: ALL SECTIONS EXCEPT AS SPECIFIED HEREIN.
.
If you are an individual consumer residing in Europe ("European Consumer")
then the following terms, conditions and export compliance requirements
apply and are made part of your License: 1, 2, 3, 4, applicable parts of 6,
7, 9 and the first paragraph of export compliance. IF YOU ARE A EUROPEAN
CONSUMER THIS LICENSE SHALL NOT AFFECT YOUR RIGHTS UNDER THE STATUTORY LAWS
OF EUROPE.
.
Your right to use the Software.You may use the Software in machine readable
form (i.e. the form you download from us) within a single working location.
You may copy the Software in the same form solely for back-up purposes or
use within a single working location. You must reproduce ADAPTEC's
copyright notice and proprietary legends. These requirements apply to
European Consumers.
.
Restrictions. This Software contains trade secrets and in order to protect
them you may not: (1) distribute copies of the Software in any manner,
including, but not limited to, distribution through web site posting; (2)
decompile, reverse engineer, disassemble, or otherwise reduce the Software
to a human perceivable form; (3) MODIFY, ADAPT OR TRANSLATE THE SOFTWARE
INTO ANY OTHER FORM; (4) RENT, LEASE, LOAN, RESELL FOR PROFIT, OR CREATE
DERIVATIVE WORKS BASED UPON THE SOFTWARE OR ANY PART OF IT. These
requirements apply to European Consumers.
.
Ownership. The Software is copyrighted by, proprietary to and a trade
secret of ADAPTEC. ADAPTEC retains the title, ownership and intellectual
property rights in and to the Software and all subsequent copies regardless
of the form or media. The Software is protected by the copyright laws of
the United States, the European Union, and international copyright
treaties. This License is not a sale of the Software. These terms apply to
European consumers.
.
Termination. This License is effective until terminated. This License will
terminate automatically without notice if you fail to comply with any of
the provisions. Upon termination you shall destroy all copies of the
Software including any partial copies. This provision applies to European
Consumers.
.
Disclaimer of Warranty. IF YOU ARE A EUROPEAN CONSUMER THEN THIS SECTION 5
DOES NOT APPLY TO YOU AND DOES NOT FORM PART OF YOUR LICENSE WITH US.
PROCEED TO SECTION 6. THE SOFTWARE IS LICENSED TO YOU "AS IS." YOU ACCEPT
ALL RISKS WHICH MAY ARISE FROM THE DOWNLOADING OF THE SOFTWARE, INCLUDING
BUT NOT LIMITED TO ERRORS IN TRANSMISSION OR CORRUPTION OF EXISTING DATA OR
SOFTWARE. ADAPTEC MAKES NO WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY
DISCLAIMS ANY WARRANTY OF NON INFRINGEMENT OF THIRD PARTIES' RIGHTS,
WARRANTIES OF SATISFACTORY QUALITY AND OF FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow the exclusion of implied warranties or limitations
of how long an implied warranty may last, so the above exclusion may not
apply to you. You may also have other rights which vary from state to state.
.
Limitation of Liability. FOR EUROPEAN CONSUMERS: WE WILL NOT BE LIABLE TO
YOU WHERE YOU SUFFER LOSS WHICH WAS NOT FORESEEABLE TO YOU AND TO US WHEN
YOU DOWNLOADED THE SOFTWARE (EVEN IF IT RESULTS FROM OUR FAILURE TO COMPLY
WITH THIS LICENSE OR OUR NEGLIGENCE); WHERE YOU SUFFER ANY BUSINESS LOSS
INCLUDING LOSS OF REVENUE, PROFITS OR ANTICIPATED SAVINGS (WHETHER THOSE
LOSSES ARE THE DIRECT OR INDIRECT RESULT OF OUR DEFAULT); OR WHERE YOUR
LOSS DOES NOT RESULT FROM OUR FAILURE TO COMPLY WITH THIS LICENSE OR OUR
NEGLIGENCE. THE SOFTWARE HAS BEEN MADE AVAILABLE TO YOU FREE OF CHARGE. YOU
MAY AT ANY TIME DOWNLOAD A FURTHER COPY OF THE SOFTWARE FREE OF CHARGE TO
REPLACE YOUR ORIGINAL COPY OF THE SOFTWARE (CONSEQUENTLY, WE AND OUR
SUPPLIERS WILL ONLY BE LIABLE TO YOU UP TO A MAXIMUM TOTAL LIMIT OF TWO
THOUSAND DOLLARS U.S. OR ITS EURO EQUIVALENT AT THE TIME A CLAIM IS MADE).
OUR MAXIMUM FINANCIAL RESPONSIBILITY TO YOU AND THAT OF OUR SUPPLIERS WILL
NOT EXCEED THIS LIMIT EVEN IF THE ACTUAL LOSS YOU SUFFER IS MORE THAN THAT.
HOWEVER, NOTHING IN THIS LICENSE SHALL RESTRICT ANY PARTY'S LIABILITY FOR
FRAUD, DEATH OR PERSONAL INJURY ARISING FROM ITS NEGLIGENCE OR FOR FRAUD OR
ANY FRAUDULENT MISREPRESENTATION.
.
ALL OTHERS DOWNLOADING THE SOFTWARE: THE SOFTWARE IS PROVIDED FREE OF
CHARGE TO YOU, THEREFORE UNDER NO CIRCUMSTANCES EXCEPT AS DESCRIBED HEREIN
AND UNDER NO LEGAL THEORY, TORT (INCLUDING NEGLIGENCE), CONTRACT, OR
OTHERWISE, SHALL ADAPTEC OR ITS SUPPLIERS OR RESELLERS BE LIABLE TO YOU OR
ANY OTHER PERSON FOR ANY ECONOMIC LOSS (INCLUDING LOSS OF PROFIT) OR FOR
ANY LOSS OF DATA, LOSS OF BUSINESS, LOSS OF GOODWILL, LOSS OF ANTICIPATED
SAVINGS (IN EACH CASE WHETHER DIRECT OR INDIRECT) OR FOR ANY OTHER DIRECT
OR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER
EVEN IF ADAPTEC SHALL HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
HOWEVER, NOTHING IN THIS LICENSE SHALL RESTRICT ANY PARTY'S LIABILITY FOR
FRAUD, DEATH OR PERSONAL INJURY ARISING FROM ITS NEGLIGENCE OR FOR FRAUD OR
ANY FRAUDULENT MISREPRESENTATION.
.
Export. By downloading, you acknowledge that the laws and regulations of
the United States and relevant countries within the European Union,
restrict the export and re-export of the Software. Further, you agree that
you will not export or re-export the Software or media in any form without
the appropriate United States and foreign government approval. If you are a
European Consumer you must not export Software outside the country in which
you download it without our prior written permission. (See below for
details on Export Compliance Requirements.)
.
U.S. Government Restricted Rights. IF YOU ARE A EUROPEAN CONSUMER THEN THIS
CLAUSE WILL NOT APPLY TO YOU AND DOES NOT FORM PART OF YOUR LICENSE
AGREEMENT WITH US. PLEASE PROCEED TO SECTION 9. If the Software is acquired
under the terms of a United States GSA contract, use, reproduction or
disclosure is subject to the restrictions set forth in the applicable ADP
Schedule contract. If the Software is acquired under the terms of a DoD or
civilian agency contract, use, duplication or disclosure by the Government
is subject to the restrictions of this License in accordance with 48 C.F.R.
12.212 of the Federal Acquisition Regulations and its successors and 48
C.F.R. 227.7202-1 of the DoD FAR Supplement and its successors. (See below
for details on Export Compliance Requirements.)
.
General. California residents entered into and to be performed within
California, except as governed by Federal law. Should any provision of this
License be declared unenforceable in any jurisdiction, then such provision
shall be deemed to be severable from this License and shall not affect the
remainder hereof. All rights in the Software not specifically granted in
this License are reserved by Adaptec.
.
EXPORT COMPLIANCE REQUIREMENTS
.
Export of any information from the Adaptec web site (including Confidential
Information obtained through Adaptec Access) outside of the United States
is subject to all U.S. export control laws. You will abide by such laws and
also to the provision of the U.S. Export-Re-export Requirements and
Enhanced Proliferation Control Initiative set forth here. You and your
organization will not sell, license, or otherwise provide or ship Adaptec
products or technical data (or the direct product thereof) for export or
re-export to the embargoed or restricted* countries listed below:
.
Afghanistan (Taliban controlled area), Cuba, Iran, Iraq, North Korea*,
Sudan, and Syria*
.
You agree not to transfer, export or re-export Adaptec products, technology
or software to your customers or any intermediate entity in the chain of
supply if our products will be used in the design, development, production,
stockpiling or use of missiles, chemical or biological weapons or for
nuclear end uses without obtaining prior authorization from the U.S.
Government.
.
You also agree that unless you receive prior authorization from the U.S.
Department of Commerce, you shall not transfer, export or re-export,
directly or indirectly, any Adaptec technology or software (or the direct
product of such technology or software or any part thereof, or any process
or service which is the direct product of such technology or software) to
any Sanctioned and/or Embargoed entity listed on:
.
http://www.bis.doc.gov/ComplianceAndEnforcement/ListsToCheck.htm
.
If you have any questions concerning this License, contact:
.
Microsemi Corporation
Legal Department
1380 Bordeaux Drive
Sunnyvale, CA 94089
Phone: (408) 239-8000

2
debian/dirs vendored Normal file
View File

@ -0,0 +1,2 @@
usr/sbin
usr/lib/arcconf

1
debian/docs vendored Normal file
View File

@ -0,0 +1 @@
amd64/2.02/README.TXT

62
debian/postinst vendored Normal file
View File

@ -0,0 +1,62 @@
#!/bin/sh
set -e
if [ -f "/usr/lib/arcconf/arcconf-3.03" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-3.03 303
fi
if [ -f "/usr/lib/arcconf/arcconf-3.02" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-3.02 302
fi
if [ -f "/usr/lib/arcconf/arcconf-3.01" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-3.01 301
fi
if [ -f "/usr/lib/arcconf/arcconf-3.00" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-3.00 300
fi
if [ -f "/usr/lib/arcconf/arcconf-2.06" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.06 206
fi
if [ -f "/usr/lib/arcconf/arcconf-2.05" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.05 205
fi
if [ -f "/usr/lib/arcconf/arcconf-2.04" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.04 204
fi
if [ -f "/usr/lib/arcconf/arcconf-2.03" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.03 203
fi
if [ -f "/usr/lib/arcconf/arcconf-2.02" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.02 202
fi
if [ -f "/usr/lib/arcconf/arcconf-2.01" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.01 201
fi
if [ -f "/usr/lib/arcconf/arcconf-2.00" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-2.00 200
fi
if [ -f "/usr/lib/arcconf/arcconf-1.08" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-1.08 108
fi
if [ -f "/usr/lib/arcconf/arcconf-1.07" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-1.07 107
fi
if [ -f "/usr/lib/arcconf/arcconf-1.06" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-1.06 106
fi
if [ -f "/usr/lib/arcconf/arcconf-1.05" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-1.05 105
fi
if [ -f "/usr/lib/arcconf/arcconf-1.04" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-1.04 104
fi
if [ -f "/usr/lib/arcconf/arcconf-7.31" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-7.31 100
fi
if [ -f "/usr/lib/arcconf/arcconf-4.30" ]; then
update-alternatives --install /usr/lib/arcconf/arcconf arcconf /usr/lib/arcconf/arcconf-4.30 90
fi
#DEBHELPER#
exit 0

62
debian/prerm vendored Normal file
View File

@ -0,0 +1,62 @@
#! /bin/sh
set -e
if [ -f "/usr/lib/arcconf/arcconf-3.03" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-3.03
fi
if [ -f "/usr/lib/arcconf/arcconf-3.02" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-3.02
fi
if [ -f "/usr/lib/arcconf/arcconf-3.01" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-3.01
fi
if [ -f "/usr/lib/arcconf/arcconf-3.00" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-3.00
fi
if [ -f "/usr/lib/arcconf/arcconf-2.06" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.06
fi
if [ -f "/usr/lib/arcconf/arcconf-2.05" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.05
fi
if [ -f "/usr/lib/arcconf/arcconf-2.04" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.04
fi
if [ -f "/usr/lib/arcconf/arcconf-2.03" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.03
fi
if [ -f "/usr/lib/arcconf/arcconf-2.02" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.02
fi
if [ -f "/usr/lib/arcconf/arcconf-2.01" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.01
fi
if [ -f "/usr/lib/arcconf/arcconf-2.00" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-2.00
fi
if [ -f "/usr/lib/arcconf/arcconf-1.08" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-1.08
fi
if [ -f "/usr/lib/arcconf/arcconf-1.07" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-1.07
fi
if [ -f "/usr/lib/arcconf/arcconf-1.06" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-1.06
fi
if [ -f "/usr/lib/arcconf/arcconf-1.05" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-1.05
fi
if [ -f "/usr/lib/arcconf/arcconf-1.04" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-1.04
fi
if [ -f "/usr/lib/arcconf/arcconf-7.31" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-7.31
fi
if [ -f "/usr/lib/arcconf/arcconf-4.30" ]; then
update-alternatives --remove arcconf /usr/lib/arcconf/arcconf-4.30
fi
#DEBHELPER#
exit 0

138
debian/rules vendored Executable file
View File

@ -0,0 +1,138 @@
#!/usr/bin/make -f
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
clean:
dh_testdir
dh_testroot
dh_clean
install:
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
ifeq ($(DEB_BUILD_ARCH),amd64)
install -D -m 0755 debian/arcconf.wrapper64 \
debian/arcconf/usr/sbin/arcconf
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/centos5/libstdc++.so.6.0.8
install -D -m 0755 amd64/centos5/libstdc++.so.6.0.8 \
debian/arcconf/usr/lib/arcconf/libstdcv4.so.6.0.8
ln -s libstdcv4.so.6.0.8 debian/arcconf/usr/lib/arcconf/libstdcv4.so.6
install -D -m 0755 amd64/3.03/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-3.03
install -D -m 0755 amd64/3.02/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-3.02
install -D -m 0755 amd64/3.01/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-3.01
install -D -m 0755 amd64/3.00/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-3.00
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.06/arcconf
install -D -m 0755 amd64/2.06/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.06
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.05/arcconf
install -D -m 0755 amd64/2.05/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.05
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.04/arcconf
install -D -m 0755 amd64/2.04/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.04
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.03/arcconf
install -D -m 0755 amd64/2.03/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.03
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.02/arcconf
install -D -m 0755 amd64/2.02/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.02
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.01/arcconf
install -D -m 0755 amd64/2.01/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.01
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/2.00/arcconf
install -D -m 0755 amd64/2.00/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.00
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/1.08/arcconf
install -D -m 0755 amd64/1.08/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.08
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/1.07/arcconf
install -D -m 0755 amd64/1.07/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.07
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/1.06/arcconf
install -D -m 0755 amd64/1.06/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.06
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/1.05/arcconf
install -D -m 0755 amd64/1.05/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.05
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" amd64/1.04/arcconf
install -D -m 0755 amd64/1.04/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.04
sed -i "s/libstdc++.so.5/libstdcv3.so.5/g" amd64/7.31/libstdc++.so.5
install -D -m 0755 amd64/7.31/libstdc++.so.5 \
debian/arcconf/usr/lib/arcconf/libstdcv3.so.5
sed -i "s/libstdc++.so.5/libstdcv3.so.5/g" amd64/7.31/arcconf
install -D -m 0755 amd64/7.31/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-7.31
install -D -m 0755 i386/4.30/libstdc++-libc6.2-2.so.3 \
debian/arcconf/usr/lib/arcconf/libstdc++-libc6.2-2.so.3
install -D -m 0755 amd64/4.30/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-4.30
endif
ifeq ($(DEB_BUILD_ARCH),i386)
install -D -m 0755 debian/arcconf.wrapper32 \
debian/arcconf/usr/sbin/arcconf
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/centos5/libstdc++.so.6.0.8
install -D -m 0755 i386/centos5/libstdc++.so.6.0.8 \
debian/arcconf/usr/lib/arcconf/libstdcv4.so.6.0.8
ln -s libstdcv4.so.6.0.8 debian/arcconf/usr/lib/arcconf/libstdcv4.so.6
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/2.01/arcconf
install -D -m 0755 i386/2.01/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.01
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/2.00/arcconf
install -D -m 0755 i386/2.00/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-2.00
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/1.08/arcconf
install -D -m 0755 i386/1.08/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.08
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/1.07/arcconf
install -D -m 0755 i386/1.07/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.07
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/1.06/arcconf
install -D -m 0755 i386/1.06/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.06
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/1.05/arcconf
install -D -m 0755 i386/1.05/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.05
sed -i "s/libstdc++.so.6/libstdcv4.so.6/g" i386/1.04/arcconf
install -D -m 0755 i386/1.04/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-1.04
sed -i "s/libstdc++.so.5/libstdcv3.so.5/g" i386/7.31/libstdc++.so.5
install -D -m 0755 i386/7.31/libstdc++.so.5 \
debian/arcconf/usr/lib/arcconf/libstdcv3.so.5
sed -i "s/libstdc++.so.5/libstdcv3.so.5/g" i386/7.31/arcconf
install -D -m 0755 i386/7.31/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-7.31
install -D -m 0755 i386/4.30/libstdc++-libc6.2-2.so.3 \
debian/arcconf/usr/lib/arcconf/libstdc++-libc6.2-2.so.3
install -D -m 0755 i386/4.30/arcconf \
debian/arcconf/usr/lib/arcconf/arcconf-4.30
endif
dh_install
binary-indep: build install
binary-arch: build install
dh_testdir
dh_testroot
dh_installchangelogs
dh_installdocs
dh_link
dh_compress
dh_fixperms
dh_makeshlibs
dh_strip
dh_installdeb
LD_LIBRARY_PATH=$$(pwd)/debian/arcconf/usr/lib/arcconf:$${LD_LIBRARY_PATH} dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
binary: binary-arch binary-indep
.PHONY: build clean binary-indep binary-arch binary install

29
files.diz Normal file
View File

@ -0,0 +1,29 @@
amd64!arcconf!3.03.1!arcconf_v3_03_23668.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v3_03_23668.zip!b561a9db7b68695a10b489e63348a7ad!3.03
amd64!arcconf!3.03.1!arcconf_v3_02_23600.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v3_02_23600.zip!63878768e5c80b787f1e83f28cd07c09!3.02
amd64!arcconf!3.03.1!arcconf_v3_01_23531.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v3_01_23531.zip!8d8148719bda151c8fbbdb3426ea6e08!3.01
amd64!arcconf!3.03.1!arcconf_v3_00_23488.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v3_00_23488.zip!df63edf89beba7b8e716db04994e5242!3.00
amd64!arcconf!3.03.1!arcconf_v2_06_23167.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_06_23167.zip!f84e041ec412b1ccea4ab5e659a7709e!2.06
amd64!arcconf!3.03.1!arcconf_v2_05_22932.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_05_22932.zip!51a03b5fe08b45f229b2c73127c5c6ae!2.05
amd64!arcconf!3.03.1!arcconf_v2_04_22665.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_04_22665.zip!07153757100a62ece5551d8950297f00!2.04
amd64!arcconf!3.03.1!arcconf_v2_03_22476.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_03_22476.zip!e98c9f2fb11d368adc0378ddd9daad40!2.03
amd64!arcconf!3.03.1!arcconf_v2_02_22404.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_02_22404.zip!373126b8d256aa76022906145a87d398!2.02
amd64!arcconf!3.03.1!arcconf_v2_01_22270.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_01_22270.zip!a51110590c3439245e5179a9e35bad86!2.01
i386!arcconf!3.03.1!arcconf_v2_01_22270.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_01_22270.zip!a51110590c3439245e5179a9e35bad86!2.01
amd64!arcconf!3.03.1!arcconf_v2_00_21811.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_00_21811.zip!946ed3423254d893120ceb89f7779685!2.00
i386!arcconf!3.03.1!arcconf_v2_00_21811.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v2_00_21811.zip!946ed3423254d893120ceb89f7779685!2.00
amd64!arcconf!3.03.1!arcconf_v1_8_21375.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_8_21375.zip!7a697a7c8b99b66312116d4249ab1922!1.08
i386!arcconf!3.03.1!arcconf_v1_8_21375.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_8_21375.zip!7a697a7c8b99b66312116d4249ab1922!1.08
amd64!arcconf!3.03.1!arcconf_v1_7_21229.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_7_21229.zip!8d8e1829172bb72f69081b2ac6d2e50b!1.07
i386!arcconf!3.03.1!arcconf_v1_7_21229.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_7_21229.zip!8d8e1829172bb72f69081b2ac6d2e50b!1.07
amd64!arcconf!3.03.1!arcconf_v1_6_21062.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_6_21062.zip!32aa39da4ecca41c4cb987791f5aa656!1.06
i386!arcconf!3.03.1!arcconf_v1_6_21062.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_6_21062.zip!32aa39da4ecca41c4cb987791f5aa656!1.06
amd64!arcconf!3.03.1!arcconf_v1_5_20942.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_5_20942.zip!de7e676bdd9c04db8125d04086d9efd6!1.05
i386!arcconf!3.03.1!arcconf_v1_5_20942.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_5_20942.zip!de7e676bdd9c04db8125d04086d9efd6!1.05
amd64!arcconf!3.03.1!arcconf_v1_4_20859.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_4_20859.zip!6c3d72fe83ff76e68a70fa59d92ae5f7!1.04
i386!arcconf!3.03.1!arcconf_v1_4_20859.zip!http://download.adaptec.com/raid/storage_manager/arcconf_v1_4_20859.zip!6c3d72fe83ff76e68a70fa59d92ae5f7!1.04
amd64!arcconf!3.03.1!asm_linux_x64_v7_31_18856.tgz!http://download.adaptec.com/raid/storage_manager/asm_linux_x64_v7_31_18856.tgz!f9f13c1f9223da6138abc2c8bdadd54a!7.31
i386!arcconf!3.03.1!asm_linux_x86_v7_31_18856.tgz!http://download.adaptec.com/raid/storage_manager/asm_linux_x86_v7_31_18856.tgz!2bdfd5e999a86ac5bd8c7b43d858fdfd!7.31
amd64!arcconf!3.03.1!libstdc++-4.1.2-55.el5.x86_64.rpm!http://vault.centos.org/5.11/os/x86_64/CentOS/libstdc++-4.1.2-55.el5.x86_64.rpm!ecbeb114ecf3a33848b7d4e1aefe65c2!centos5
i386!arcconf!3.03.1!libstdc++-4.1.2-55.el5.i386.rpm!http://vault.centos.org/5.11/os/i386/CentOS/libstdc++-4.1.2-55.el5.i386.rpm!b615266b1ddae7f9a17601179f83c826!centos5
amd64!arcconf!3.03.1!asm_linux_x64_v4.30-16038.rpm!http://download.adaptec.com/raid/aac/sm/asm_linux_x64_v4.30-16038.rpm!b7c7b25e2c7006b087997d8f0b8182cc!4.30
i386!arcconf!3.03.1!asm_linux_v4.30-16038.rpm!http://download.adaptec.com/raid/aac/sm/asm_linux_v4.30-16038.rpm!9585c8b60873b5f92be97a4355d306b7!4.30

BIN
i386/1.04/arcconf Executable file

Binary file not shown.

BIN
i386/1.05/arcconf Executable file

Binary file not shown.

BIN
i386/1.06/arcconf Executable file

Binary file not shown.

BIN
i386/1.07/arcconf Executable file

Binary file not shown.

292
i386/1.08/License.txt Normal file
View File

@ -0,0 +1,292 @@
International License Agreement for Non-Warranted Programs
Part 1 - General Terms
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE PROGRAM.
Adaptec WILL LICENSE THE PROGRAM TO YOU ONLY IF YOU FIRST ACCEPT THE
TERMS OF THIS AGREEMENT. BY USING THE PROGRAM YOU AGREE TO THESE
TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,
PROMPTLY RETURN THE UNUSED PROGRAM TO THE PARTY (EITHER Adaptec OR
ITS RESELLER) FROM WHOM YOU ACQUIRED IT TO RECEIVE A REFUND OF
THE AMOUNT YOU PAID.
The Program is owned by (Adaptec) or a supplier of Adaptec
and is copyrighted and licensed, not sold.
The term "Program" means the original program and all whole or
partial copies of it. A Program consists of machine-readable
instructions, its components, data, audio-visual content (such
as images, text, recordings, or pictures), and related licensed
materials.
This Agreement includes Part 1 - General Terms and Part 2
Country unique Terms and is the complete agreement regarding the
use of this Program, and replaces any prior oral or written
communications between you and Adaptec. The terms of Part 2 may
replace or modify those of Part 1.
1. License
Use of the Program
Adaptec grants you a nonexclusive license to use the Program.
You may 1) use the Program to the extent of authorizations you
have acquired and 2) make and install copies to support the
level of use authorized, providing you reproduce the copyright
notice and any other legends of ownership on each copy, or
partial copy, of the Program.
If you acquire this Program as a program upgrade, your
authorization to use the Program from which you upgraded is
terminated.
You will ensure that anyone who uses the Program does so only in
compliance with the terms of this Agreement.
You may not 1) use, copy, modify, or distribute the Program
except as provided in this Agreement; 2) reverse assemble,
reverse compile, or otherwise translate the Program except as
specifically permitted by law without the possibility of
contractual waiver; or 3) sublicense, rent, or lease the
Program.
Transfer of Rights and Obligations
You may transfer all your license rights and obligations under a
Proof of Entitlement for the Program to another party by
transferring the Proof of Entitlement and a copy of this
Agreement and all documentation. The transfer of your license
rights and obligations terminates your authorization to use the
Program under the Proof of Entitlement.
2. Proof of Entitlement
The Proof of Entitlement for this Program is evidence of your
authorization to use this Program and of your eligibility for
future upgrade program prices (if announced) and potential
special or promotional opportunities.
3. Charges and Taxes
Adaptec defines use for the Program for charging purposes and
specifies it in the Proof of Entitlement. Charges are based on
extent of use authorized. If you wish to increase the extent of
use, notify Adaptec or its reseller and pay any applicable charges.
Adaptec does not give refunds or credits for charges already due or
paid.
If any authority imposes a duty, tax, levy or fee, excluding
those based on Adaptec's net income, upon the Program supplied by
Adaptec under this agreement, then you agree to pay that amount
as Adaptec specifies or
supply exemption documentation.
4. No Warranty
SUBJECT TO ANY STATUTORY WARRANTIES WHICH CAN NOT BE EXCLUDED,
Adaptec MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE WARRANTY OF NON-INFRINGEMENT
AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE PROGRAM OR TECHNICAL SUPPORT,
IF ANY. Adaptec MAKES NO WARRANTY REGARDING THE CAPABILITY OF THE
PROGRAM TO CORRECTLY PROCESS, PROVIDE AND/OR RECEIVE DATE DATA
WITHIN AND BETWEEN THE 20TH AND 21ST CENTURIES.
The exclusion also applies to any of Adaptec's subcontractors,
suppliers, or program developers (collectively called
"Suppliers").
Manufacturers, suppliers, or publishers of non-Adaptec Programs may
provide their own warranties.
5. Limitation of Liability
NEITHER Adaptec NOR ITS SUPPLIERS WILL BE LIABLE FOR ANY DIRECT OR
INDIRECT
DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
SAVINGS, OR ANY INCIDENTAL, SPECIAL, OR OTHER ECONOMIC
CONSEQUENTIAL DAMAGES, EVEN IF Adaptec IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
6. General
Nothing in this Agreement affects any statutory rights of
consumers that cannot be waived or limited by contract.
Adaptec may terminate your license if you fail to comply with the
terms of this Agreement. If Adaptec does so, you must immediately
destroy the Program and all copies you made of it.
You agree to comply with applicable export laws and regulations.
Neither you nor Adaptec will bring a legal action under this
Agreement more than two years after the cause of action arose
unless otherwise provided by local law without the possibility
of contractual waiver or limitation.
Neither you nor Adaptec is responsible for failure to fulfill any
obligations due to causes beyond its control.
Adaptec does not provide program services or technical support,
unless Adaptec specifies otherwise.
The laws of the country in which you acquire the Program govern
this Agreement, except 1) in Australia, the laws of the State or
Territory in which the transaction is performed govern this
Agreement; 2) in Albania, Armenia, Belarus, Bosnia/Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan,
Kirghizia, Former Yugoslav Republic of Macedonia
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic,
Slovenia, Ukraine, and Federal Republic of Yugoslavia, the laws
of Austria govern this Agreement; 3) in the United Kingdom, all
disputes relating to this Agreement will be governed by English
Law and will be submitted to the exclusive jurisdiction of the
English courts; 4) in Canada, the laws in the Province of
Ontario govern this Agreement; and 5) in the United States and
Puerto Rico, and People's Republic of China, the laws of the
State of New York govern this Agreement.
Part 2 - Country-unique Terms
AUSTRALIA:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Trade Practices Act 1974 or other
legislation and are only limited to the extent permitted by the
applicable legislation.
Limitation of Liability (Section 3):
The following paragraph is added to this Section:
Where Adaptec is in breach of a condition or warranty implied by the
Trade Practices Act 1974, Adaptec's liability is limited to the
repair or replacement of the goods, or the supply of equivalent
goods. Where that condition or warranty relates to right to
sell, quiet possession or clear title, or the goods are of a
kind ordinarily acquired for personal, domestic or household use
or consumption, then none of the limitations in this paragraph
apply.
GERMANY:
No Warranty (Section 4):
The following paragraphs are added to this Section:
The minimum warranty period for Programs is six months.
In case a Program is delivered without Specifications, we will
only warrant that the Program information correctly describes
the Program and that the Program can be used according to the
Program information. You have to check the usability according
to the Program information within the "money-back guaranty"
period.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
The limitations and exclusions specified in the Agreement will
not apply to damages caused by Adaptec with fraud or gross
negligence, and for express warranty.
INDIA:
General (Section 6):
The following replaces the fourth paragraph of this Section:
If no suit or other legal action is brought, within two years
after the cause of action arose, in respect of any claim that
either party may have against the other, the rights of the
concerned party in respect of such claim will be forfeited and
the other party will stand released from its obligations in
respect of such claim.
IRELAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Except as expressly provided in these terms and conditions, all
statutory conditions, including all warranties implied, but
without prejudice to the generality of the foregoing, all
warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
ITALY:
Limitation of Liability (Section 5):
This Section is replaced by the following:
Unless otherwise provided by mandatory law, Adaptec is not liable
for any damages which might arise.
NEW ZEALAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Consumer Guarantees Act 1993 or
other legislation which cannot be excluded or limited. The
Consumer Guarantees Act 1993 will not apply in respect of any
goods or services which Adaptec provides, if you require the goods
and services for the purposes of a business as defined in that
Act.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
Where Programs are not acquired for the purposes of a business
as defined in the Consumer Guarantees Act 1993, the limitations
in this Section are subject to the limitations in that Act.
PEOPLE'S REPUBLIC OF CHINA:
Charges (Section 3):
The following paragraph is added to the Section:
All banking charges incurred in the People's Republic of China
will be borne by you and those incurred outside the People's
Republic of China will be borne by Adaptec.
UNITED KINGDOM:
Limitation of Liability (Section 5):
The following paragraph is added to this Section at the end of
the first paragraph:
The limitation of liability will not apply to any breach of
Adaptec's obligations implied by Section 12 of the Sales of Goods
Act 1979 or Section 2 of the Supply of Goods and Services Act
1982.
UNITED STATES AND CANADA:
No Country-unique Terms apply.
By continuing with the installation of the Program, you are
accepting the terms and conditions above.

693
i386/1.08/README.TXT Normal file
View File

@ -0,0 +1,693 @@
README.TXT
Adaptec maxView Storage Manager
Adaptec Command Line Interface Utility (ARCCONF)
as of May 19, 2015
--------------------------------------------------------------------
Please review this file for important information about issues
and errata that were discovered after completion of the standard
product documentation. In the case of conflict between various
parts of the documentation set, this file contains the most
current information.
The following information is available in this file:
1. New Features in this Release
2. Software Versions and Documentation
2.1 Utility Software
2.2 Documentation
3. Installation and Setup
3.1 Installation Instructions
3.2 Supported Operating Systems
3.3 General Setup Notes
3.4 Remote Access
3.5 Windows 8 Setup
3.6 SLES Setup
3.7 Ubuntu Setup
3.8 Bootable USB Image Security Warnings
3.9 RAW Device Setup
3.10 maxView Plugin for VMware vSphere Web Client
3.11 Firmware Downgrade on Series 8 Board Revision "B1"
3.12 Uninstallation Issues
4. Known Limitations
4.1 Login Issues on Windows Domain Server
4.2 Hot Spare Issues
4.3 Dual-Controller Systems
4.4 Email Notifications
4.5 SGPIO Enclosures
4.6 Non-RAID Mode Controllers
4.7 RAID-Level Migrations
4.8 maxCache Device Migration
4.9 ARCCONF maxCache Device Size Issue
4.10 Browser Issues
4.11 Remote System Issues
4.12 Power Management Issues
4.13 RAID 50/RAID 60, Max Drives
4.14 RAID 10 Segment Order
4.15 RAID 10 Rebuild Order
4.16 Verify with Fix
4.17 Locate Logical Drive Blink LED
4.18 ATA Secure Erase
4.19 ARCCONF Backward Compatibility
4.20 Adaptec Series 6 Controller Issues
4.21 Simple Volume Support
4.22 Auto-Volume Support
4.23 Hot-Removing Disk Drives on Xenserver Guest OS
4.24 Updating Hard Disk Firmware on VMware Guest OS
4.25 Creating a Support Archive on a Guest OS
4.26 Enclosure Status Reporting
4.27 PHY Status on Enclosure Backplanes
4.28 Special Characters in Logical Device Names
4.29 Speaker Status on SuperMicro SAS2X28 Enclosures
4.30 Changing Read and Write Cache Settings for a Logical Drive
4.31 Online Help Issues
--------------------------------------------------------------------
1. New Features in this Release
o Support for new operating systems
o Support for HDD/SSD temperature monitoring
o Improved SMART error logging for SAS and SATA devices
o Basecode logs and Flash Backup Module hard error logs included in support archive
o Enhanced maxView SMTP mail client to comply with highly secured SMTP servers (Gmail, Yahoo, etc)
o Open Pegasus 2.13 (maxView CIM Server) upgrade
o Re-design of maxView schedule dialog with advanced Primefaces calendar component
o Multi-level authentication and access privileges in maxView (Administrator/Standard user)
o Installer change: install GUI, Agent and CIM Server as separate components (saves 500MB RAM space, typical)
o Global Init/Uninit Physical Devices wizard
o Global Delete Logical Devices wizard
o Misc UI enhancements:
- Logical drive property tab shows initialization method
- Physical device temperature added to physical drive information
- Logical device long running task navigation from tree node to Tab to Task dialog
o ARCCONF changes:
- New commands: backupunit, driverupdate, setcustommode, setconnectormode
- Enhanced commands: identify command supports blink LED start/stop
o Bugfixes
--------------------------------------------------------------------
2. Software Versions and Documentation
2.1 Utility Software
o Adaptec maxView Storage Manager Version 1.08
o Adaptec ARCCONF Command Line Interface Utility Version 1.08
2.2 Documentation
PDF Format (English/Japanese):
o maxView Storage Manager User's Guide
o Adaptec RAID Controller Command Line Utility User's Guide
HTML and Text Format:
o maxView Storage Manager Online Help
o maxView Storage Manager README.TXT file
--------------------------------------------------------------------
3. Installation and Setup
3.1 Installation Instructions
The Adaptec SAS RAID Controllers Installation and User's Guide
contains complete installation information for the controllers
and drivers. The Adaptec RAID Controllers Command Line Utility
User's Guide contains complete installation information for
ARCCONF. The maxView Storage Manager User's Guide contains
complete installation information for the maxView Storage
Manager software.
3.2 Supported Operating Systems
Microsoft Windows:
o Windows Server 2012 R2, 64-bit
o Windows Server 2008, 32-bit and 64-bit
o Windows Server 2008 R2, 64-bit
o Windows SBS 2011, 64-bit
o Windows 7, 32-bit and 64-bit
o Windows 8, Windows 8.1, 32-bit and 64-bit
Linux:
o Red Hat Enterprise Linux 7.1, 64-bit
o Red Hat Enterprise Linux 6.6, 5.11, 32-bit and 64-bit
o SuSE Linux Enterprise Server 12, 64 bit
o SuSE Linux Enterprise Server 11, 10*, 32-bit and 64-bit
o Debian Linux 7.8, 32-bit and 64-bit
o Ubuntu Linux 14.10, 14.04.1, 12.04.3, 32-bit and 64-bit
o Fedora Linux 21, 32-bit and 64-bit
o CentOS 7.1, 64 bit
o CentOS 6.6, 5.11, 32-bit and 64-bit
*See Section 3.6 for SLES 10 setup issues
Virtual OS Environments:
o VMware ESXi 6.0, VMware ESXi 5.5
o Citrix XenServer 6.5 (32-bit GOS only)
Solaris:
o Solaris 10 U11
o Solaris 11.2
3.3 General Setup Notes
o maxView Storage Manager supports Adaptec Series 8, Adaptec
Series 7, and Adaptec Series 6 controllers. It is not backward
compatible with older Adaptec controller models.
o maxView Storage Manager is not supported on FreeBSD. Use
ARCCONF to create and manage arrays.
o maxView Storage Manager and legacy Adaptec Storage Manager (ASM)
cannot coexist on the same system.
3.4 Remote Access
maxView Storage Manager requires the following range of ports
to be open for remote access:
o 34570-34580 (TCP)
o 34570 (UDP)
o 34577-34580 (UDP)
See also Section 4.12 for OS-specific issues and workarounds.
3.5 Windows 8 Setup
To log in and use maxView Storage Manager on a Windows 8 system,
you must create a local user account; you cannot use your
MS Live account. To create a local user account:
1. Log into your MS Live account.
2. Select Settings->Change PC Settings->Users->Switch to Local user.
3. Provide account details.
4. Start maxView Storage Manager and log in with your local user
account credentials.
3.6 SLES Setup
o Due to a JRE conflict, maxView Storage Manager is not
supported on SLES 10 SP2/SP3 (x32, x64), and SLES 10 SP4 (x32).
WORKAROUND: Install SLES 10 SP4 64-bit then replace the 64-bit
JRE with a 32-bit JRE. Alternatively, use ARCCONF for storage
management on SLES 10 systems.
o To avoid a problem with launching maxView Storage Manager on
SLES 11 x64 systems with DHCP enabled, ensure that the
/etc/hosts file maps the server IP address to a valid host
name; it is not sufficient to map the IP address to 'localhost'.
3.7 Ubuntu Setup
o To avoid a maxView Login failure on Ubuntu systems, you must
ensure that the root user account is enabled. (It is disabled,
by default, on Ubuntu 14.04 and later because no password is set.)
For example: sudo bash; sudo passwd root
o When upgrading maxView Storage Manager on an existing Ubuntu
Linux x64 installation, you must enable the upgrade switch
before installing the maxView .deb package:
export maxView_Upgrade=true
dpkg -i StorMan-*.deb
To uninstall maxView after the upgrade:
export maxView_Upgrade=false
dpkg -r storman
3.8 Bootable USB Image Security Warnings
When running maxView Storage Manager from the bootable USB
image, you may be prompted with one or more with security
warnings before maxView launches. In each case, acknowledge
the warning and continue.
3.9 RAW Device Setup
On Adaptec Series 7 and Adaptec Series 8 controllers, a RAW
Pass Through device is analogous to a JBOD, supported by Adaptec
Series 6 controllers and older. Any drive without Adaptec RAID
metadata is exposed to the OS as a RAW Pass Through device. To
remove the Adaptec metadata and convert the drive to a RAW device,
use the Uninitialize command in maxView Storage Manager; any
existing data on the drive is destroyed. (You can also run
uninit from the BIOS or ARCCONF.) For more information about
working with RAW devices, see 'controller modes' in the CLI
User's Guide, and BIOS 'general settings' in the RAID Controller
Installation and User's Guide.
3.10 maxView Plugin for VMware vSphere Web Client
The maxView Plugin for VMware vSphere Web Client is supported
on VMware 5.5 only.
3.11 Firmware Downgrade on Series 8 Board Revision "B1"
Firmware downgrade from maxView Storage Manager, ARCCONF or the
BIOS is not supported on Adaptec Series 8 RAID controllers with
Board Revision "B1" (the newest board revision). Older firmware
versions do not support Board Revision "B1".
3.12 Uninstallation Issues
o When uninstalling maxView Storage Manager on Fedora Linux,
the OS displays a series of warning messages about missing
files. These messages can be ignored; the uninstallation
completes successfully.
WORKAROUND: To avoid the warnings, uninstall maxView with
'./StorMan-1.06-21032.i386.bin --remove' rather than
'rpm -e StorMan'.
o When using the 'Modify' option to uninstall maxView Storage
Manager on Windows, the 'Adaptec' folder is not removed from
the file system.
--------------------------------------------------------------------
4. Known Limitations
4.1 Login Issues on Windows Domain Server
If the maxView login account doesn't have local administrative
rights, login will fail with an error message: 'Invalid Username
or Password'. On domain servers running later versions of Microsoft
Windows Server, where no local administrator exists or can be
created, maxView login is not possible. Use ARCCONF to create
and manage arrays.
4.2 Hot Spare Issues
o After using a global hot spare to rebuild a redundant logical
drive, maxView Storage Manager displays an erroneous event
message: "Deleted dedicated hot spare drive for logical device".
In fact, the message should read "Logical device X is no longer
protected by hot spare drive Y".
o maxView Storage Manager allows you to un-assign a global hot
spare drive while copyback is in progess. This procedure is
not recommended.
4.3 Dual-Controller Systems
In dual-controller systems, the controller order in maxView
Storage Manager and the BIOS differs. Example: with an
Adaptec 72405 and 7805 installed, the BIOS reports
the 72405 as controller 1 and the 7805 as controller 2;
in the GUI, the controller order is reversed.
4.4 Email Notifications
o On Linux systems, we recommend adding the SMTP host name
to the /etc/hosts file. Doing so ensures that email
notifications will succeed if you specify the email
server in maxView Storage Manager by host name. Otherwise,
email notifications (including test messages) may fail if
the DNS is unable to resolve the host hame.
WORKAROUND: specify the email server in maxView Storage
Manager by IP address.
o On CentOS 5.9 x64, email notifications may not be sent for
logical drive creations, degraded logical drives, or logical
drives that are rebuilding or fully rebuilt.
4.5 SGPIO Enclosures
In this release, maxView Storage Manager does not show connector
information for SGPIO enclosures.
4.6 Non-RAID Mode Controllers
maxView Storage Manager can "see" RAID controllers operating
in HBA mode, Auto-Volume mode, and Simple Volume mode (Adaptec
Series 7 and Adaptec Series 8 controllers only). However, to
change the controller mode, you must use ARCCONF or the BIOS.
4.7 RAID-Level Migrations
o The following RAID-level migrations (RLM) are supported in
this release:
RAID 0 to RAID 5
RAID 0 to RAID 10
RAID 5 to RAID 6
RAID 6 to RAID 5
RAID 10 to RAID 5
RAID 5 to RAID 10
RAID 1 to RAID 5
SIMPLE VOLUME to RAID 1
RAID 1 to SIMPLE VOLUME
o When migrating a Simple Volume to RAID 1, maxView Storage
Manager reports the logical drive state as Impacted (rather
than Reconfiguring); this is normal.
o We do not recommend performing a RAID-level migration or
Online Capacity Expansion (OCE) on a logical drive with
maxCache SSD caching enabled.
NOTE: maxView Storage Manager grays out the options for logical
drives with maxCache enabled. ARCCONF terminates the task.
o Always allow a RAID-level migration to complete before creating
a support archive file. Otherwise, the support archive will
include incorrect partition information. Once the migration is
complete, the partition information will be reported correctly.
4.8 maxCache Device Migration
Only one maxCache Device is supported per controller. Moving
the maxCache Device (all underlying SSDs) from one
controller to another (assuming both controllers support
maxCache) is supported only if (1) the new controller does not
have a maxCache Device or any other maxCache Device with a
conflicting device number and (2) only after a clean shutdown
on the old controller.
4.9 ARCCONF maxCache Device Size Issue
ARCCONF supports >2TB maxCache Devices if you create the
device with the 'max' parameter. However, the functional
limit for the maxCache Device is 2TB, which is also the
limit in maxView Storage Manager.
4.10 Browser Issues
o To run maxView Storage Manager on the supported browsers,
Javascript must be enabled.
o Due to a certificate bug in Firefox 31.x, maxView login
may fail on RHEL systems with a "Secure Connection" error.
(Firefox 31.1 is the default browser on RHEL 6.6; on
RHEL 7.1, it is 31.4.)
WORKAROUND: Upgrade to Firefox 36.
o With the default Security setting in Microsoft Internet
Explorer 10 and 11, you may be unable to login to maxView
Storage Manager or experience certain GUI display issues
in the maxView online Help system.
WORKAROUND: Change the default Security setting from High
(or Medium-High) to Medium. Alternative: add the GUI IP
address to the trusted sites list.
o With Google Chrome, the scrollbar resets itself to the top
after selecting a drive in the Logical Drive wizard. To
select another drive, you must scroll back down to the
drive location.
o With Microsoft Internet Explorer 10, the controller
firmware update wizard does not show the f/w update
file name when the upload completes. To refresh the
display, click Next then Back.
o We do not recommend using multiple browsers simultaneously
on the same maxView instance. Doing so may cause display
issues or freezes; to restore maxView, refresh the
display by pressing F5.
4.11 Remote System Access on Linux and Windows
To avoid remote system access failures from Linux and Windows
clients running maxView Storage Manager, check and update one
or all of the following system and network settings:
Windows:
o Ensure that the DNS server information is properly configured
RHEL/Linux:
o Set server.properties file permissions to at least read-only at all levels
1. Stop all maxView services.
2. Set the Permissions of server.properties file to read and write or read-only
at all levels (Owner, Group and Others). Apply and close.
3. Restart all services in the given order - cim, agent, tomcat
4. Now try to remote login to this system from any other system
o Check/update these network settings:
1. Disable SELinux
2. Disable firewall.
3. Disable the ipv6 in the system, if ipconfig shows both ipv4 and ipv6 address.
4. Remove the virtual bridge virbr0, if present
5. Enter local ip address in 'localip' parameter in server.properties file
4.12 Power Management Issues
o Power management is not supported on FreeBSD.
o Capturing support logs from maxView or ARCCONF will spin up
drives when power management is active. This behavior is by design.
o For logical drives comprised of SSDs only, the Power Tab in
maxView Storage Manager is disabled.
o The Logical Drive Creation wizard does not save the power
management settings after the logical drive is created.
It is always disabled.
WORKAROUND: Enable power management for the logical drive
from the Set Properties window.
4.13 RAID 50/RAID 60, Max Drives
The maximum number of drives in a RAID 50 or RAID 60 differ
between maxView Storage Manager, ARCCONF, and the BIOS:
o BIOS and ARCCONF: 128 drives max
RAID 50 - From 2-16 legs with 3-32 drives/leg
RAID 60 - From 2-16 legs with 4-16 drives/leg
o maxView Storage Manager:
Assumes 2 legs for RAID 50/RAID 60 (non-selectable)
RAID 50 2-32 drives/leg (64 total)
RAID 60 2-16 drives/leg (32 total)
4.14 RAID 10 Segment Order
maxView Storage Manager and the Ctrl-A BIOS report the wrong
segment order for RAID 10s, regardless of the order in which
the drives are selected.
Example 1: Create RAID 10 with 2 SDDs and 2 HDDs in maxView Storage Manager:
(1a) ARCCONF and maxView Storage Manager see the following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
Device 0 (H1)
(1b) the BIOS/CTRL-A sees the following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 0 (H1)
Device 3 (S2)
(1c) the correct and expected RAID segment order is:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
Example 2: Create RAID 10 with 2 SDDs and 2 HDDs with ARCCONF:
(2a) the BIOS/CTRL-A sees the following RAID segment order:
Device 0 (H1)
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
(2b) ARCCONF and maxView Storage Manager see the correct RAID segment order:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
4.15 RAID 10 Rebuild Order
With a degraded RAID 10 logical drive, the drive is rebuilt
one leg at a time, not in parallel.
4.16 Verify with Fix
In maxView Storage Manager and ARCCONF, the Verify with Fix
operation is NOT available when:
1. The logical drive has a non-redundant RAID level
2. Other tasks are in progress on the logical drive
3. The logical drive is in a non-optimal or impacted state
4.17 Locate Logical Drive Blink LED
In maxView Storage Manager, Locate Logical Drive continues to
blink the LED for a pulled physical drive in the array after
the locate action is stopped. (For unpulled drives, the blinking
stops.) This issue is not seen with ARCCONF.
4.18 ATA Secure Erase
In ARCCONF, the ATA Secure Erase operation cannot be aborted.
Once started, it continues to completion.
NOTE: ATA Secure Erase is also available in the Ctrl-A BIOS.
and maxView Storage Manager.
4.19 ARCCONF Backward Compatibility
ARCCONF is backward compatible with older Adaptec controller
models. As a result, the ARCCONF user's guide and online help
show command options that are not supported by newer Adaptec
controllers, like the Adaptec Series 7 and Adaptec Series 8.
Example:
o With ARCCONF SETMAXCACHE, Adaptec Series 7 and Series 8
controllers do not support ADDTOPOOL or REMOVEFROMPOOL
4.20 Adaptec Series 6 Controller Issues
The following issues are seen only with Adaptec Series 6 RAID
controllers:
o In maxView Storage Manager, the Preserve Cache option on the
Set Properties window is not supported on Series 6 RAID
controllers. Attempting to set this option for the Series 6
controller fails.
o Renaming a RAID volume disables the write-cache (if enabled).
You cannot re-enable the write-cache in maxView Storage Manager.
WORKAROUND: Use ARCCONF to enable the write-cache.
o In a VMware Guest OS under VMware 5.x, maxView Storage Manager
and ARCCONF do not detect existing logical drive partitions.
As a result, attempting to delete, clear, or erase the logical
drive may fail.
o On Series 6 controllers, maxView Storage Manager deletes
partitioned JBODs without issuing a warning message.
o Series 6 controllers do not support the ARCCONF GETPERFORM command.
4.21 Simple Volume Support
o In this release, you can create a maximum of 128 Simple
Volumes in maxView Storage Manager, ARCCONF, or the BIOS.
o When a Simple Volume fails, the status remains unchanged
after drive replacement.
WORKAROUND: Manually delete the Simple Volume to remove it.
4.22 Auto-Volume Support
o Changing a controller into Auto-Volume mode (ARCCONF/BIOS) is not
supported if the configuration includes any logical device type
other than Simple Volume, including a maxCache Device. The mode
switch from RAID mode to Auto-Volume mode is blocked if any other
type of logical volume exists (including maxCache). After
switching to Auto-Volume mode, you can create and delete Simple
Volumes only in maxView Storage Manager and ARCCONF.
o In Auto-Volume mode, only the first 128 RAW drives are converted
to Simple Volumes; the rest of the RAW drives remain unchanged.
If you uninitialize a Ready drive while the controller is in
Auto-Volume mode, the firmware converts the drive automatically
until the Simple Volume count reaches the maximum.
4.23 Hot-Removing Disk Drives on Xenserver Guest OS
XenServer does not support "hot-removal" of disk drives from a
partitioned logical drive. As a result, if you hot remove a disk
from a logical drive, the Guest OS becomes inaccessible because
the drive partition remains visible to the OS instead of being
cleared.
WORKAROUND: Reboot the XenServer host, detach the failed
partition, then restart the VM.
4.24 Updating Hard Disk Firmware on VMware Guest OS
Updating the firmware for a SAS hard disk drive with ARCCONF/maxView
can crash (PSOD) the VMware Guest OS. This issue is seen with SAS
hard drives only; with SATA drives, the firmware update completes
successfully.
4.25 Creating a Support Archive on a Guest OS
To create a support archive on a VMware or Xenserver Guest OS,
use maxView Storage Manager only. Creating a support archive
with ARCCONF is not supported in this release.
4.26 Enclosure Status Reporting
Enclosure status, in maxView Storage Manager, is event-driven.
As a result, enclosures can have a "Degraded" status even if
related resources (fan, temperature, power) are performing
normally (Optimal status). For instance, the Enclosure status
changes to "Degraded" if the system reports an "Enclosure device
not responding ..." event, even if other sensor values are normal.
4.27 PHY Status on Enclosure Backplanes
In the Controller Properties window, maxView Storage Manager shows
the Connector Info as "unknown" for all PHYs on an enclosure-based
backplane (for instance, a backplane attached to connector 1).
4.28 Special Characters in Logical Device Names
Special characters are permitted in logical device names
in maxView Storage Manager, the BIOS, and ARCCONF. However,
with Linux ARCCONF (create, setname), special characters
must be "escaped" to ensure proper interpretation. For
example:
ARCCONF SETNAME 1 LOGICALDRIVE 1 arc_ldrive%\$12\&
4.29 Speaker Status on SuperMicro SAS2X28 Enclosures
SuperMicro SAS2X28 enclosures do not propagate the speaker
status to maxView Storage Manager. As a result, maxView
always displays the speaker status as Off.
4.30 Changing Read and Write Cache Settings for a Logical Drive
maxView Storage Manager does not allow you to change the
read-cache and write-cache settings for a logical drive in
one step. You must click OK after each change.
4.31 Online Help Issues
When opening the maxView Storage Manager help from a remote
Linux system (eg, over a VPN), the help window may fail to
open with a 'can't establish connection to server' message.
WORKAROUND: replace 127.0.0.1:8443 in the URL with <system_ip_address>:8443
--------------------------------------------------------------------
(c) 2015 PMC-Sierra, Inc. All Rights Reserved.
This software is protected under international copyright laws and
treaties. It may only be used in accordance with the terms
of its accompanying license agreement.
The information in this document is proprietary and confidential to
PMC-Sierra, Inc., and for its customers' internal use. In any event,
no part of this document may be reproduced or redistributed in any
form without the express written consent of PMC-Sierra, Inc.,
1380 Bordeaux Drive, Sunnyvale, CA 94089.
P/N DOC-01768-05-A Rev A

BIN
i386/1.08/arcconf Executable file

Binary file not shown.

BIN
i386/2.00/arcconf Executable file

Binary file not shown.

292
i386/2.01/License.txt Normal file
View File

@ -0,0 +1,292 @@
International License Agreement for Non-Warranted Programs
Part 1 - General Terms
PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE PROGRAM.
Adaptec WILL LICENSE THE PROGRAM TO YOU ONLY IF YOU FIRST ACCEPT THE
TERMS OF THIS AGREEMENT. BY USING THE PROGRAM YOU AGREE TO THESE
TERMS. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT,
PROMPTLY RETURN THE UNUSED PROGRAM TO THE PARTY (EITHER Adaptec OR
ITS RESELLER) FROM WHOM YOU ACQUIRED IT TO RECEIVE A REFUND OF
THE AMOUNT YOU PAID.
The Program is owned by (Adaptec) or a supplier of Adaptec
and is copyrighted and licensed, not sold.
The term "Program" means the original program and all whole or
partial copies of it. A Program consists of machine-readable
instructions, its components, data, audio-visual content (such
as images, text, recordings, or pictures), and related licensed
materials.
This Agreement includes Part 1 - General Terms and Part 2
Country unique Terms and is the complete agreement regarding the
use of this Program, and replaces any prior oral or written
communications between you and Adaptec. The terms of Part 2 may
replace or modify those of Part 1.
1. License
Use of the Program
Adaptec grants you a nonexclusive license to use the Program.
You may 1) use the Program to the extent of authorizations you
have acquired and 2) make and install copies to support the
level of use authorized, providing you reproduce the copyright
notice and any other legends of ownership on each copy, or
partial copy, of the Program.
If you acquire this Program as a program upgrade, your
authorization to use the Program from which you upgraded is
terminated.
You will ensure that anyone who uses the Program does so only in
compliance with the terms of this Agreement.
You may not 1) use, copy, modify, or distribute the Program
except as provided in this Agreement; 2) reverse assemble,
reverse compile, or otherwise translate the Program except as
specifically permitted by law without the possibility of
contractual waiver; or 3) sublicense, rent, or lease the
Program.
Transfer of Rights and Obligations
You may transfer all your license rights and obligations under a
Proof of Entitlement for the Program to another party by
transferring the Proof of Entitlement and a copy of this
Agreement and all documentation. The transfer of your license
rights and obligations terminates your authorization to use the
Program under the Proof of Entitlement.
2. Proof of Entitlement
The Proof of Entitlement for this Program is evidence of your
authorization to use this Program and of your eligibility for
future upgrade program prices (if announced) and potential
special or promotional opportunities.
3. Charges and Taxes
Adaptec defines use for the Program for charging purposes and
specifies it in the Proof of Entitlement. Charges are based on
extent of use authorized. If you wish to increase the extent of
use, notify Adaptec or its reseller and pay any applicable charges.
Adaptec does not give refunds or credits for charges already due or
paid.
If any authority imposes a duty, tax, levy or fee, excluding
those based on Adaptec's net income, upon the Program supplied by
Adaptec under this agreement, then you agree to pay that amount
as Adaptec specifies or
supply exemption documentation.
4. No Warranty
SUBJECT TO ANY STATUTORY WARRANTIES WHICH CAN NOT BE EXCLUDED,
Adaptec MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, THE WARRANTY OF NON-INFRINGEMENT
AND THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, REGARDING THE PROGRAM OR TECHNICAL SUPPORT,
IF ANY. Adaptec MAKES NO WARRANTY REGARDING THE CAPABILITY OF THE
PROGRAM TO CORRECTLY PROCESS, PROVIDE AND/OR RECEIVE DATE DATA
WITHIN AND BETWEEN THE 20TH AND 21ST CENTURIES.
The exclusion also applies to any of Adaptec's subcontractors,
suppliers, or program developers (collectively called
"Suppliers").
Manufacturers, suppliers, or publishers of non-Adaptec Programs may
provide their own warranties.
5. Limitation of Liability
NEITHER Adaptec NOR ITS SUPPLIERS WILL BE LIABLE FOR ANY DIRECT OR
INDIRECT
DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST
SAVINGS, OR ANY INCIDENTAL, SPECIAL, OR OTHER ECONOMIC
CONSEQUENTIAL DAMAGES, EVEN IF Adaptec IS INFORMED OF THEIR
POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
6. General
Nothing in this Agreement affects any statutory rights of
consumers that cannot be waived or limited by contract.
Adaptec may terminate your license if you fail to comply with the
terms of this Agreement. If Adaptec does so, you must immediately
destroy the Program and all copies you made of it.
You agree to comply with applicable export laws and regulations.
Neither you nor Adaptec will bring a legal action under this
Agreement more than two years after the cause of action arose
unless otherwise provided by local law without the possibility
of contractual waiver or limitation.
Neither you nor Adaptec is responsible for failure to fulfill any
obligations due to causes beyond its control.
Adaptec does not provide program services or technical support,
unless Adaptec specifies otherwise.
The laws of the country in which you acquire the Program govern
this Agreement, except 1) in Australia, the laws of the State or
Territory in which the transaction is performed govern this
Agreement; 2) in Albania, Armenia, Belarus, Bosnia/Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan,
Kirghizia, Former Yugoslav Republic of Macedonia
(FYROM), Moldova, Poland, Romania, Russia, Slovak Republic,
Slovenia, Ukraine, and Federal Republic of Yugoslavia, the laws
of Austria govern this Agreement; 3) in the United Kingdom, all
disputes relating to this Agreement will be governed by English
Law and will be submitted to the exclusive jurisdiction of the
English courts; 4) in Canada, the laws in the Province of
Ontario govern this Agreement; and 5) in the United States and
Puerto Rico, and People's Republic of China, the laws of the
State of New York govern this Agreement.
Part 2 - Country-unique Terms
AUSTRALIA:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Trade Practices Act 1974 or other
legislation and are only limited to the extent permitted by the
applicable legislation.
Limitation of Liability (Section 3):
The following paragraph is added to this Section:
Where Adaptec is in breach of a condition or warranty implied by the
Trade Practices Act 1974, Adaptec's liability is limited to the
repair or replacement of the goods, or the supply of equivalent
goods. Where that condition or warranty relates to right to
sell, quiet possession or clear title, or the goods are of a
kind ordinarily acquired for personal, domestic or household use
or consumption, then none of the limitations in this paragraph
apply.
GERMANY:
No Warranty (Section 4):
The following paragraphs are added to this Section:
The minimum warranty period for Programs is six months.
In case a Program is delivered without Specifications, we will
only warrant that the Program information correctly describes
the Program and that the Program can be used according to the
Program information. You have to check the usability according
to the Program information within the "money-back guaranty"
period.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
The limitations and exclusions specified in the Agreement will
not apply to damages caused by Adaptec with fraud or gross
negligence, and for express warranty.
INDIA:
General (Section 6):
The following replaces the fourth paragraph of this Section:
If no suit or other legal action is brought, within two years
after the cause of action arose, in respect of any claim that
either party may have against the other, the rights of the
concerned party in respect of such claim will be forfeited and
the other party will stand released from its obligations in
respect of such claim.
IRELAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Except as expressly provided in these terms and conditions, all
statutory conditions, including all warranties implied, but
without prejudice to the generality of the foregoing, all
warranties implied by the Sale of Goods Act 1893 or the Sale of
Goods and Supply of Services Act 1980 are hereby excluded.
ITALY:
Limitation of Liability (Section 5):
This Section is replaced by the following:
Unless otherwise provided by mandatory law, Adaptec is not liable
for any damages which might arise.
NEW ZEALAND:
No Warranty (Section 4):
The following paragraph is added to this Section:
Although Adaptec specifies that there are no warranties, you may
have certain rights under the Consumer Guarantees Act 1993 or
other legislation which cannot be excluded or limited. The
Consumer Guarantees Act 1993 will not apply in respect of any
goods or services which Adaptec provides, if you require the goods
and services for the purposes of a business as defined in that
Act.
Limitation of Liability (Section 5):
The following paragraph is added to this Section:
Where Programs are not acquired for the purposes of a business
as defined in the Consumer Guarantees Act 1993, the limitations
in this Section are subject to the limitations in that Act.
PEOPLE'S REPUBLIC OF CHINA:
Charges (Section 3):
The following paragraph is added to the Section:
All banking charges incurred in the People's Republic of China
will be borne by you and those incurred outside the People's
Republic of China will be borne by Adaptec.
UNITED KINGDOM:
Limitation of Liability (Section 5):
The following paragraph is added to this Section at the end of
the first paragraph:
The limitation of liability will not apply to any breach of
Adaptec's obligations implied by Section 12 of the Sales of Goods
Act 1979 or Section 2 of the Supply of Goods and Services Act
1982.
UNITED STATES AND CANADA:
No Country-unique Terms apply.
By continuing with the installation of the Program, you are
accepting the terms and conditions above.

819
i386/2.01/README.TXT Normal file
View File

@ -0,0 +1,819 @@
README.TXT: Adaptec maxView Storage Manager &
ARCCONF Command Line Interface Utility
as of March 22, 2016
--------------------------------------------------------------------
Please check the product website for the later versions of this
file to ensure you are reviewing the latest information. This
file contains important information about issues and errata
that were discovered after completion of the standard
product documentation.
In the case of conflict between various parts of the documentation
set, this file contains the most current information.
Table of Contents
1. New Features of this Release
2. Software Versions and Documentation
2.1. Utility Software
2.2. Documentation
4.2.2.1. Series 6, 7, 8 Controller Documentation
4.2.2.2. HBA 1000 Series Product Documentation
4.2.2.3. SmartIOC Product Documentation
3. Installation Notes
3.1. Installation and Setup
3.2. Supported Operating Systems
3.2.1. Series 6, 7, 8 Controllers
3.2.2. Smart Family Controllers
3.3. General Setup Notes
3.4. Remote Access
3.5. Windows 8 Setup
3.6. SLES Setup
3.7. Ubuntu Setup
3.8. Bootable USB Image Security Warnings
3.9. RAW Device Setup (Series 6, 7, 8 Only)
3.10. maxView Plugin for VMware vSphere Web Client
4. Known Limitations
4.1. Global Limitations
4.1.1. Dual-Controller Systems
4.1.2. Email Notifications
4.1.3. SGPIO Enclosures
4.1.4. Non-RAID Mode Controllers
4.1.5. Browser Issues
4.1.6. Remote System Access on Linux and Windows
4.1.7. RAID 10 Segment Order
4.1.8. RAID 10 Rebuild Order
4.1.9. Locate Logical Drive Blink LED
4.1.10. ARCCONF Backward Compatibility
4.1.11. Updating Hard Disk Firmware on VMware Guest OS
4.1.12. Hot Swap Issues on VMware CentOS Guest OS
4.1.13. Enclosure Status Reporting
4.1.14. PHY Status on Enclosure Backplanes
4.1.15. Special Characters in Logical Device Names
4.1.16. Speaker Status on SuperMicro SAS2X28 Enclosures
4.1.17. Online Help Issues
4.1.18. Broadcasting Alerts About Status and Activity
4.2. Limitations Specific to Series 6, 7, 8 Controllers
4.2.1. RAID-Level Migrations
4.2.2. maxCache Device Migration
4.2.3. ARCCONF maxCache Device Size Issue
4.2.4. Power Management Issues
4.2.5. Verify with Fix
4.2.6. ATA Secure Erase
4.2.7. Series 6 Controller Issues
4.2.8. Simple Volume Support
4.2.9. Auto-Volume Support
4.2.10. Hot-Removing Disk Drives on Xenserver Guest OS
4.2.11. Changing Read and Write Cache Settings for Logical Drive
4.3. Limitations Specific to Smart Family Controllers
4.3.1. SES Passthrough Commands to Expanders
4.3.2. Firmware Upgrade Issues
1. New Features of this Release
o Added new features:
- New command to identify a device by blinking its LEDs.
- Segment and Group Information of a RAID 10 Logical
Device can now be displayed.
- A new UNINIT/TASK command to clear drive configuration
for physical devices containing RAID Information Sector
(RIS) that have been masked in order to protect the
configuration data.
- Ability to show SGPIO virtual SEP information to show
enclosure devices for SGPIO backplanes.
- For cases where a logical drive fails, the array status
is now reported.
- Ability to display physical drive mount point information.
- Ability to display logical drive mount point information.
- Verify Write support is provided.
- Linux Hyper-V is supported for the maxView Storage Manager.
o For Smart family products, added support for Citrix XenServer.
o Bugfixes
2. Software Versions and Documentation
2.1. Utility Software
o Microsemi Adaptec maxView Storage Manager
Version 2.01.00 (22268)
o Microsemi Adaptec ARCCONF Command Line Interface
Utility Version 2.01.00 (22268)
2.2. Documentation
2.2.1. Series 6, 7, 8 Controller Documentation
PDF Format (English/Japanese)
o maxView Storage Manager User's Guide
o Adaptec RAID Controller Command Line Utility
User's Guide
HTML and Text Format
o maxView Storage Manager Online Help
o maxView Storage Manager README.TXT file
2.2.2. HBA 1000 Series Product Documentation
PDF:
o Adaptec maxView Storage Manager User's Guide for
Smart-Family Controllers
o Adaptec HBA 1000 Series Command Line Utility
User's Guide
HTML and Text Format:
o maxView Storage Manager for Smart-Family Controllers
Online Help
o maxView Storage Manager README.TXT file
2.2.3. SmartIOC Product Documentation
PDF:
o Adaptec maxView Storage Manager User's Guide for
Smart-Family Controllers
o Adaptec SmartIOC 2000 Command Line Utility User's
Guide
HTML and Text Format:
o maxView Storage Manager for Smart-Family Controllers
Online Help
o maxView Storage Manager README.TXT file
3. Installation Notes
3.1. Installation and Setup
Refer to your product documentation for the correct
installation and setup details:
o Your product Installation and User's Guide contains
complete installation information for your product's
drivers.
o The maxView Storage Manager User's Guide for your
product contains installation information for the
maxView Storage Manager software.
o The Command Line Utility User's Guide for your product
contains complete installation for ARCCONF.
3.2. Supported Operating Systems
3.2.1. Series 6, 7, 8 Controllers
Microsoft Windows
o Microsoft Windows Server 2012 (64-bit)
o Microsoft Windows Server 2012 R2 (64-bit)
o Microsoft Windows Server 2008 R2 SP1 (64-bit)
o Microsoft Windows SBS 2011 (Standard and Essential)
o Microsoft Windows 10 (32-bit and 64-bit)
o Microsoft Windows 8.1 (32-bit and 64-bit)
o Microsoft Windows 7 (32-bit and 64-bit)
o Microsoft WinPE 8.1 (32-bit and 64-bit)
Linux
o Red Hat Enterprise Linux/CentOS 7.2, 7.1 (64-bit)
o Red Hat Enterprise Linux/CentOS 6.7, 6.6 (64-bit)
o Red Hat Enterprise Linux/CentOS 5.11, 5.10 (64-bit)
o SuSE Linux Enterprise Server 12 SP1 (64-bit)
o SuSE Linux Enterprise Server 12 (64-bit)
o SuSE Linux Enterprise Server 11 SP4 and SP3 (64-bit)
o Debian Linux 8.1 (64-bit)
o Ubuntu Linux 14.04.3, 14.04 (64-bit)
o Ubuntu Linux 12.04.5 (64-bit)
o Fedora Linux 22 (64-bit)
FreeBSD
o FreeBSD 10.2 (64-bit)
o FreeBSD 9.3 (64-bit)
Virtual OS Environments
o VMware ESXi 6.0 (64-bit)
o VMware ESXi 5.5 U2 (64-bit)
o Citrix XenServer 6.5.1 (64-bit)
o Citrix XenServer 6.2 (32-bit)
Solaris
o Solaris 11 (32-bit)
o Solaris 10 U9 (32-bit)
Notes
1. The ARCCONF Command Line Utility is supported on
only 64-bit versions of Microsoft Windows and Linux.
2. Boot USB (offline or pre-boot) for the ARCCONF Command
Line Utility and maxView Storage Manager is supported
in Linux.
3.2.2. Smart Family Controllers
Microsoft Windows
o Microsoft Windows Server 2012 (64-bit)
o Microsoft Windows Server 2012 R2 (64-bit)
o Microsoft Windows Server 2008 R2 SP1 (64-bit)
o Microsoft Windows SBS 2011 (Standard and Essential)
o Microsoft Windows 10 (32-bit and 64-bit)
o Microsoft Windows 8.1 (32-bit and 64-bit)
o Microsoft Windows 7 (32-bit and 64-bit)
Linux
o Red Hat Enterprise Linux/CentOS 7.2, 7.1 (64-bit)
o Red Hat Enterprise Linux/CentOS 6.7, 6.6 (64-bit)
o Red Hat Enterprise Linux/CentOS 5.11, 5.10 (64-bit)
o SuSE Linux Enterprise Server 12 SP1 (64-bit)
o SuSE Linux Enterprise Server 12 (64-bit)
o SuSE Linux Enterprise Server 11 SP4 and SP3 (64-bit)
o Ubuntu Linux 14.04.3, 14.04 (64-bit)
o Ubuntu Linux 12.04.5 (64-bit)
Virtual OS Environments
o VMware ESXi 6.0, ESXi U1 (64-bit)
o VMware ESXi 5.5 U2, ESXi 5.5 U3 (64-bit)
o Citrix XenServer 6.5.1 (64-bit)
o Citrix XenServer 6.2 (32-bit)
Notes
1. The ARCCONF Command Line Utility is supported on
only 64-bit versions of Microsoft Windows and Linux.
2. Boot USB (offline or pre-boot) for the ARCCONF Command
Line Utility and maxView Storage Manager is supported
in Linux.
3.3. General Setup Notes
o maxView Storage Manager is not backwards-compatible with
Series 5 and older Adaptec controller models.
o maxView Storage Manager and legacy Adaptec Storage Manager
(ASM) cannot coexist on the same system.
o For Series 6, 7, 8 controllers:
- maxView Storage Manager is not supported on FreeBSD.
Use ARCCONF to create and manage arrays.
3.4. Remote Access
maxView Storage Manager requires the following range of
ports to be open for remote access:
o 34570-34580 (TCP)
o 34570 (UDP)
o 34577-34580 (UDP)
See also 4.1.6 for OS-specific issues and workarounds.
3.5. Windows 8 Setup
To log in and use maxView Storage Manager on a Windows 8
system, you must create a local user account; you cannot
use your MS Live account.
To create a local user account:
1. Log into your MS Live account.
2. Select Settings->Change PC Settings->Users->Switch to
Local user.
3. Provide account details.
4. Start maxView Storage Manager and log in with your
local user account credentials.
3.6. SLES Setup
o To avoid a problem with launching maxView Storage
Manager on SLES 11 x64 systems with DHCP enabled,
ensure that the /etc/hosts file maps the server
IP address to a valid host name; it is not sufficient
to map the IP address to 'localhost'.
3.7. Ubuntu Setup
o To avoid a maxView Login failure on Ubuntu systems,
you must ensure that the root user account is enabled.
(It is disabled, by default, on Ubuntu 14.04
and later because no password is set.)
For example: sudo bash; sudo passwd root
o When upgrading maxView Storage Manager on an existing
Ubuntu Linux x64 installation, you must enable the
upgrade switch before installing the maxView .deb
package:
export maxView_Upgrade=true
dpkg -i StorMan-*.deb
To uninstall maxView after the upgrade:
export maxView_Upgrade=false
dpkg -r storman
3.8. Bootable USB Image Security Warnings
When running maxView Storage Manager from the bootable
USB image, you may be prompted with one or more with
security warnings before maxView launches. In
each case, acknowledge the warning and continue.
3.9. RAW Device Setup (Series 6, 7, 8 Only)
On Adaptec Series 7 and Adaptec Series 8 controllers,
a RAW Pass Through device is analogous to a JBOD, supported
by Adaptec Series 6 controllers and older. Any drive without
Adaptec RAID metadata is exposed to the OS as a RAW Pass
Through device. To remove the Adaptec metadata and convert
the drive to a RAW device, use the Uninitialize command in
maxView Storage Manager; any existing data on the drive is
destroyed. (You can also run uninit from the BIOS or
ARCCONF.) For more information about working with RAW devices,
see 'controller modes' in the CLI User's Guide, and BIOS
'general settings' in the RAID Controller Installation and
User's Guide.
3.10. maxView Plugin for VMware vSphere Web Client
The maxView Plugin for VMware vSphere Web Client is
supported on VMware 5.5 and 6.0.
4. Known Limitations
4.1. Global Limitations
4.1.1. Dual-Controller Systems
In dual-controller systems, the controller order in
maxView Storage Manager and the BIOS differs. Example:
with an Adaptec 72405 and 7805 installed, the BIOS reports
the 72405 as controller 1 and the 7805 as controller 2;
in the GUI, the controller order is reversed.
4.1.2. Email Notifications
o On Linux systems, we recommend adding the SMTP host
name and the system IP address, to the /etc/hosts file.
Doing so ensures that email notifications will succeed
if you specify the email server in maxView Storage
Manager by host name. Otherwise, email notifications
(including test messages) may fail if the DNS is unable
to resolve the host name.
WORKAROUND: Specify the email server in maxView Storage
Manager by IP address.
o On CentOS 5.9 x64, email notifications may not be sent
for logical drive creations, degraded logical drives,
or logical drives that are rebuilding or fully rebuilt.
4.1.3. SGPIO Enclosures
In this release, maxView Storage Manager does not show
connector information for SGPIO enclosures.
4.1.4. Non-RAID Mode Controllers
maxView Storage Manager can "see" RAID controllers
operating in HBA mode, Auto-Volume mode, and Simple Volume
mode (Adaptec Series 7, Adaptec Series 8, Smart Family
controllers only). However, to change the controller mode
on Adaptec Series 7/8 controllers, you must use ARCCONF
or the BIOS. With Adaptec Smart-Family controllers, you
can also change the controller mode with maxView Storage
Manager.
4.1.5. Browser Issues
To run maxView Storage Manager on the supported browsers.
Javascript must be enabled.
o Due to a certificate bug in Firefox 31.x, maxView
login may fail on RHEL systems with a "Secure
Connection" error. (Firefox 31.1 is the default
browser on RHEL 6.6; on RHEL 7.1, it is 31.4.)
WORKAROUND: Upgrade to Firefox 36.
o With the default Security setting in Microsoft
Internet Explorer 10 and 11, you may be unable to
login to maxView Storage Manager or experience
certain GUI display issues in the maxView online
Help system.
WORKAROUND: Change the default Security setting
from High (or Medium-High) to Medium.
Alternative: add the GUI IP address to the trusted
sites list.
o With Google Chrome, the scrollbar resets itself to
the top after selecting a drive in the Logical Drive
wizard. To select another drive, you must
scroll back down to the drive location.
o With Microsoft Internet Explorer 10, the controller
firmware update wizard does not show the f/w update
file name when the upload completes. To refresh
the display, click Next then Back.
o We do not recommend using multiple browsers
simultaneously on the same maxView
instance. Doing so may cause display issues or freezes;
to restore maxView, refresh the display by pressing F5.
4.1.6. Remote System Access on Linux and Windows
To avoid remote system access failures from Linux
and Windows clients running maxView Storage Manager,
check and update one or all of the following system
and network settings:
Windows:
o Ensure that the DNS server information is properly
configured
RHEL/Linux:
o Set server.properties file permissions to at least
read-only at all levels
1. Stop all maxView services.
2. Set the Permissions of server.properties file to
read and write or read-only at all levels
(Owner, Group and Others).
3. Apply and close.
4. Restart all services in the given order - cim,
agent, tomcat
5. Now try to remote login to this system from any
other system
o Check/update these network settings:
1. Disable SELinux
2. Disable firewall.
3. Disable the ipv6 in the system, if ipconfig shows
both ipv4 and ipv6 address.
4. Remove the virtual bridge virbr0, if present
5. Enter local ip address in 'localip' parameter in
server.properties file
4.1.7. RAID 10 Segment Order
maxView Storage Manager and the Ctrl-A BIOS report the
wrong segment order for RAID 10s, regardless of the order
in which the drives are selected.
Example 1: Create RAID 10 with 2 SDDs and 2 HDDs in maxView
Storage Manager:
(1a) ARCCONF and maxView Storage Manager see the
following RAID segment order:
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
Device 0 (H1)
(1b) the BIOS/CTRL-A sees the following RAID segment
order:
Device 2 (S1)
Device 1 (H2)
Device 0 (H1)
Device 3 (S2)
(1c) the correct and expected RAID segment order is:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
Example 2: Create RAID 10 with 2 SDDs and 2 HDDs
with ARCCONF:
(2a) the BIOS/CTRL-A sees the following RAID segment
order:
Device 0 (H1)
Device 2 (S1)
Device 1 (H2)
Device 3 (S2)
(2b) ARCCONF and maxView Storage Manager see the
correct RAID segment order:
Device 2 (S1)
Device 0 (H1)
Device 3 (S2)
Device 1 (H2)
4.1.8. RAID 10 Rebuild Order
With a degraded RAID 10 logical drive, the drive is
rebuilt one leg at a time, not in parallel.
4.1.9. Locate Logical Drive Blink LED
In maxView Storage Manager, Locate Logical Drive
continues to blink the LED for a pulled physical drive
in the array after the locate action is stopped.
(For unpulled drives, the blinking stops.) This issue is
not seen with ARCCONF.
4.1.10. ARCCONF Backward Compatibility
ARCCONF is backward compatible with older Adaptec
controller models. As a result, the ARCCONF user's guide
and online help show command options that are not
supported by newer Adaptec controllers, like the
Adaptec Series 7 and Adaptec Series 8 or later products.
Example: With ARCCONF SETMAXCACHE, Adaptec Series 7 and
Series 8 controllers do not support ADDTOPOOL or
REMOVEFROMPOOL
4.1.11. Updating Hard Disk Firmware on VMware Guest OS
Updating the firmware for a SAS hard disk drive with
ARCCONF/maxView can crash (PSOD) the VMware Guest OS.
This issue is seen with SAS hard drives only; with
SATA drives, the firmware update completes successfully.
4.1.12. Hot Swap Issues on VMware CentOS Guest OS
Due to a limitation with the VMware CentOS Guest OS
network configuration, maxView Storage Manager does not
show newly added or removed hot swap drives.
(ARCCONF sees the configuration change but maxView
does not.)
WORKAROUND: (1) reboot the system or restart maxView
services; (2) adjust the network configuration; contact
Adaptec Support for more information.
4.1.13. Enclosure Status Reporting
Enclosure status, in maxView Storage Manager, is
event-driven. As a result, enclosures can have a
"Degraded" status even if related resources (fan,
temperature, power) are performing normally (Optimal
status). For instance, the Enclosure status changes
to "Degraded" if the system reports an "Enclosure
device not responding ..." event, even if other sensor
values are normal.
4.1.14. PHY Status on Enclosure Backplanes
In the Controller Properties window, maxView Storage
Manager shows the Connector Info as "unknown" for all
PHYs on an enclosure-based backplane (for instance, a
backplane attached to connector 1).
4.1.15. Special Characters in Logical Device Names
Special characters are permitted in logical device
names in maxView Storage Manager, the BIOS, and ARCCONF.
However, with Linux ARCCONF (create, setname), special
characters must be "escaped" to ensure proper
interpretation. For example:
ARCCONF SETNAME 1 LOGICALDRIVE 1 arc_ldrive%\$12\&amp;
4.1.16. Speaker Status on SuperMicro SAS2X28 Enclosures
SuperMicro SAS2X28 enclosures do not propagate
the speaker status to maxView Storage Manager. As
a result, maxView always displays the speaker
status as Off.
4.1.17. Online Help Issues
o When opening the maxView Storage Manager help
from a remote Linux system (eg, over a VPN), the
help window may fail to open with a 'can't establish
connection to server' message.
WORKAROUND: replace 127.0.0.1:8443 in the URL with
<system_ip_address>:8443
o In IE11, topics in the help may display with a 'Topics
Not Found' message when their corresponding links are
clicked in the navigation pane of the help.
WORKAROUND: click on the "Add" browser link to add
certification to view the content.
4.1.18. Broadcasting Alerts About Status and Activity
This feature is not supported by the maxView Storage
Manager or ARCCONF and has been removed from the product
documentation.
4.2. Limitations Specific to Series 6, 7, 8 Controllers
4.2.1. RAID-Level Migrations
o The following RAID-level migrations (RLM) are
supported in this release:
- RAID 0 to RAID 5
- RAID 0 to RAID 10
- RAID 5 to RAID 6
- RAID 6 to RAID 5
- RAID 10 to RAID 5
- RAID 5 to RAID 10
- RAID 1 to RAID 5
- SIMPLE VOLUME to RAID 1
- RAID 1 to SIMPLE VOLUME
o When migrating a Simple Volume to RAID 1, maxView
Storage Manager reports the logical drive state as
Impacted (rather than Reconfiguring);
this is normal.
o We do not recommend performing a RAID-level
migration or Online Capacity Expansion (OCE)
on a logical drive with maxCache SSD caching
enabled.
NOTE: maxView Storage Manager grays out the
options for logical drives with maxCache enabled.
ARCCONF terminates the task.
o Always allow a RAID-level migration to complete
before creating a support archive file. Otherwise,
the support archive will include incorrect
partition information. Once the migration is
complete, the partition information will be reported
correctly.
4.2.2. maxCache Device Migration
Only one maxCache Device is supported per controller.
Moving the maxCache Device (all underlying SSDs) from
one controller to another (assuming both controllers
support maxCache) is supported only if (1) the new
controller does not have a maxCache Device or any other
maxCache Device with a conflicting device number and
(2) only after a clean shutdown
on the old controller.
4.2.3. ARCCONF maxCache Device Size Issue
ARCCONF supports >2TB maxCache Devices if you create
the device with the 'max' parameter. However, the
functional limit for the maxCache Device is 2TB,
which is also the limit in maxView Storage Manager.
4.2.4. Power Management Issues
o Power management is not supported on FreeBSD.
o Capturing support logs from maxView or ARCCONF
will spin up drives when power management is
active. This behavior is by design.
o The Logical Drive Creation wizard no longer
includes the option to enable power management settings.
WORKAROUND: Enable power management for the
logical drive from the Set Properties window.
4.2.5. Verify with Fix
In maxView Storage Manager and ARCCONF, the Verify
with Fix operation is NOT available when:
1. The logical drive has a non-redundant RAID level
2. Other tasks are in progress on the logical drive
3. The logical drive is in a non-optimal or impacted state
4.2.6. ATA Secure Erase
In ARCCONF, the ATA Secure Erase operation cannot
be aborted. Once started, it continues to completion.
NOTE: ATA Secure Erase is also available in the
Ctrl-A BIOS and maxView Storage Manager.
4.2.7. Series 6 Controller Issues
The following issues are seen only with Adaptec
Series 6 RAID controllers:
o In maxView Storage Manager, the Preserve Cache
option on the Set Properties window is not
supported on Series 6 RAID controllers. Attempting
to set this option for the Series 6 controller fails.
o Renaming a RAID volume disables the write-cache
(if enabled). You cannot re-enable the write-cache
in maxView Storage Manager.
WORKAROUND: Use ARCCONF to enable the write-cache.
o In a VMware Guest OS under VMware 5.x, maxView
Storage Manager and ARCCONF do not detect existing
logical drive partitions. As a result,
attempting to delete, clear, or erase the logical
drive may fail.
o On Series 6 controllers, maxView Storage Manager
deletes partitioned JBODs without issuing a
warning message.
o Series 6 controllers do not support the ARCCONF
GETPERFORM command.
4.2.8. Simple Volume Support
o In this release, you can create a maximum of 128
Simple Volumes in maxView Storage Manager, ARCCONF,
or the BIOS.
o When a Simple Volume fails, the status remains
unchanged after drive replacement.
WORKAROUND: Manually delete the Simple Volume to
remove it.
4.2.9. Auto-Volume Support
o Changing a controller into Auto-Volume mode
(ARCCONF/BIOS) is not supported if the configuration
includes any logical device type other than Simple
Volume, including a maxCache Device. The mode switch
from RAID mode to Auto-Volume mode is blocked if any
other type of logical volume exists (including
maxCache). After switching to Auto-Volume mode,
you can create and delete Simple Volumes
only in maxView Storage Manager and ARCCONF.
o In Auto-Volume mode, only the first 128 RAW drives
are converted to Simple Volumes; the rest of the
RAW drives remain unchanged. If you uninitialize
a Ready drive while the controller is in Auto-Volume
mode, the firmware converts the drive automatically
until the Simple Volume count reaches the maximum.
4.2.10. Hot-Removing Disk Drives on Xenserver Guest OS
XenServer does not support "hot-removal" of disk
drives from a partitioned logical drive. As a result,
if you hot remove a disk from a logical drive,
the Guest OS becomes inaccessible because the drive
partition remains visible to the OS instead of being cleared.
WORKAROUND: Reboot the XenServer host, detach the
failed partition, then restart the VM.
4.2.11. Changing Read and Write Cache Settings for
Logical Drive
maxView Storage Manager does not allow you to change
the read-cache and write-cache settings for a logical drive
in one step. You must click OK after each change.
4.3. Limitations Specific to Smart Family Controllers
4.3.1. SES Passthrough Commands to Expanders
SES passthrough commands to expanders fail.
4.3.2 Firmware Upgrade Issues
For systems using Adaptec HBA 1000 with an Adaptec
SAS Expander 82885T card, where the ARCCONF utility
is used to upgrade the expander firmware, ARCCONF
may crash if 64-bit chunk sizes are used.
WORKAROUND: Use 32-bit chunk sizes to upgrade/downgrade
the expander firmware.
Copyright 2016 Microsemi Corporation. All rights reserved.
Microsemi and the Microsemi logo are trademarks of Microsemi
Corporation. All other trademarks and service marks are
the property of their respective owners.
PMC-2153191, Issue 2
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive
portfolio of semiconductor and system solutions for communications,
defense and security, aerospace, and industrial markets.
Products include high-performance and radiation-hardened
analog mixed-signal integrated circuits, FPGAs, SoCs, and
ASICs; power management products; timing and synchronization
devices and precise time solutions; voice processing devices;
RF solutions; discrete components; enterprise storage and
communications solutions; security technologies and scalable
anti-tamper products; Ethernet solutions; Power-over-Ethernet
ICs and midspans; custom design capabilities and services.
Microsemi is headquartered in Aliso Viejo, California and has
approximately 4,800 employees world-wide.
Learn more at www.microsemi.com.
Microsemi makes no warranty, representation, or guarantee
regarding the information contained herein or the suitability
of its products and services for any particular purpose,
nor does Microsemi assume any liability whatsoever arising
out of the application or use of any product or circuit.
The products sold hereunder and any other products sold
by Microsemi have been subject to limited testing and should
not be used in conjunction with mission-critical equipment
or applications. Any performance specific ations are believed
to be reliable but are not verified, and Buyer must conduct
and complete all performance and other testing of the products,
alone and together with, or installed in, any end-products.
Buyer shall not rely on any data and performance specifications
or parameters provided by Microsemi. It is the Buyer's
responsibility to independently determine suitability of
any products and to test and verify the same. The information
provided by Microsemi hereunder is provided as is, where is
and with all faults, and the entire risk associated with such
information is entirely with the Buyer. Microsemi does not
grant, explicitly or implicitly, to any party any patent
rights, licenses, or any other IP rights, whether with regard
to such information itself or anything described by
such information. Information provided in this document is
proprietary to Microsemi, and Microsemi reserves the right
to make any changes to the information in this document or
to any products and services at any time without notice.
The technology discussed in this document may be protected by
one or more patent grants.

BIN
i386/2.01/arcconf Executable file

Binary file not shown.

BIN
i386/4.30/arcconf Executable file

Binary file not shown.

Binary file not shown.

678
i386/7.31/README.TXT Normal file
View File

@ -0,0 +1,678 @@
--------------------------------------------------------------------
README.TXT
Adaptec Storage Manager (ASM)
as of May 7, 2012
--------------------------------------------------------------------
Please review this file for important information about issues
and erratas that were discovered after completion of the standard
product documentation. In the case of conflict between various
parts of the documentation set, this file contains the most
current information.
The following information is available in this file:
1. Software Versions and Documentation
1.1 Adaptec Storage Manager
1.2 Documentation
2. Installation and Setup Notes
2.1 Supported Operating Systems
2.2 Minimum System Requirements
2.3 General Setup Notes
2.4 Linux Setup Notes
2.5 Debian Linux Setup Notes
3. General Cautions and Notes
3.1 General Cautions
3.2 General Notes
4. Operating System-Specific Issues and Notes
4.1 Windows - All
4.2 Windows 64-Bit
4.3 Linux
4.4 Debian and Ubuntu
4.5 FreeBSD
4.6 Fedora and FreeBSD
4.7 Linux and FreeBSD
4.8 VMware
5. RAID Level-Specific Notes
5.1 RAID 1 and RAID 5 Notes
5.2 RAID 10 Notes
5.3 RAID x0 Notes
5.4 RAID Volume Notes
5.5 JBOD Notes
5.6 Hybrid RAID Notes
5.7 RAID-Level Migration Notes
6. Power Management Issues and Notes
7. "Call Home" Issues and Notes
8. ARCCONF Issues and Notes
9. Other Issues and Notes
--------------------------------------------------------------------
1. Software Versions and Documentation
1.1. Adaptec Storage Manager Version 7.3.1, ARCCONF Version 7.3.1
1.2. Documentation on this DVD
PDF format*:
- Adaptec Storage Manager User's Guide
- Adaptec RAID Controller Command Line Utility User's Guide
*Requires Adobe Acrobat Reader 4.0 or later
HTML and text format:
- Adaptec Storage Manager Online Help
- Adaptec Storage Manager README.TXT file
--------------------------------------------------------------------
2. Installation and Setup Notes
- The Adaptec Storage Manager User's Guide contains complete installation
instructions for the Adaptec Storage Manager software. The Adaptec
RAID Controllers Command Line Utility User's Guide contains
complete installation instructions for ARCCONF, Remote ARCCONF,
and the Adaptec CIM Provider. The Adaptec RAID Controllers
Installation and User's Guide contains complete installation
instructions for Adaptec RAID controllers and drivers.
2.1 Supported Operating Systems
- Microsoft Windows*:
o Windows Server 2008, 32-bit and 64-bit
o Windows Server 2008 R2, 64-bit
o Windows SBS 2011, 32-bit and 64-bit
o Windows Storage Server 2008 R2, 32-bit and 64-bit
o Windows Storage Server 2011, 32-bit and 64-bit
o Windows 7, 32-bit and 64-bit
*Out-of-box and current service pack
- Linux:
o Red Hat Enterprise Linux 5.7, 6.1, IA-32 and x64
o SuSE Linux Enterprise Server 10, 11, IA-32 and x64
o Debian Linux 5.0.7, 6.0 IA-32 and x64
o Ubuntu Linux 10.10, 11.10, IA-32 and x64
o Fedora Linux 14, 15, 16 IA-32 and x64
o Cent OS 5.7, 6.2, IA-32 and x64
o VMware ESXi 5.0, VMware ESX 4.1 Classic (Agent only)
- Solaris:
o Solaris 10,
o Solaris 11 Express
- FreeBSD:
o FreeBSD 7.4, 8.2
2.2 Minimum System Requirements
o Pentium Compatible 1.2 GHz processor, or equivalent
o 512 MB RAM
o 135 MB hard disk drive space
o Greater than 256 color video mode
2.3 General Setup Notes
- You can configure Adaptec Storage Manager settings on other
servers exactly as they are configured on one server. To
replicate the Adaptec Storage Manager Enterprise view tree
and notification list, do the following:
1. Install Adaptec Storage Manager on one server.
2. Start Adaptec Storage Manager. Using the 'Add remote system'
action, define the servers for your tree.
3. Open the Notification Manager. Using the 'Add system'
action, define the notification list.
4. Exit Adaptec Storage Manager.
5. Copy the following files onto a diskette from the directory
where the Adaptec Storage Manager is installed:
RaidMSys.ser --> to replicate the tree
RaidNLst.ser --> to replicate the notification list
RaidSMTP.ser --> to replicate the SMTP e-mail notification list
RaidJob.ser --> to replicate the jobs in the Task Scheduler
6. Install Adaptec Storage Manager on the other servers.
7. Copy the files from the diskette into the directory where
Adaptec Storage Manager is installed on the other servers.
2.4 Linux Setup Notes
- Because the RPM for Red Hat Enterprise Linux 5 is unsigned, the
installer reports that the package is "Unsigned, Malicious Software".
Ignore the message and continue the installation.
- To run Adaptec Storage Manager under Red Hat Enterprise Linux for
x64, the Standard installation with "Compatibility Arch Support"
is required.
- To install Adaptec Storage Manager on Red Hat Enterprise Linux,
you must install two packages from the Red Hat installation CD:
o compat-libstdc++-7.3-2.96.122.i386.rpm
o compat-libstdc++--devel-7.3-2.96.122.i386.rpm
NOTE: The version string in the file name may be different
from above. Be sure to check the version string on the
Red Hat CD.
For example, type:
rpm --install /mnt/compat-libstdc++-7.3-2.96.122.i386.rpm
where mnt is the mount point of the CD-ROM drive.
- To install Adaptec Storage Manager on Red Hat Enterprise Linux 5,
you must install one of these packages from the Red Hat
installation CD:
o libXp-1.0.0-8.i386.rpm (32-Bit)
o libXp-1.0.0-8.x86.rpm (64-Bit)
- To install Adaptec Storage Manager on SuSE Linux Enterprise
Desktop 9, Service Pack 1, for 64-bit systems, you must install
two packages from the SuSE Linux installation CD:
- liblcms-devel-1.12-55.2.x86_64.rpm
- compat-32bit-9-200502081830.x86_64.rpm
NOTE: The version string in the file name may be different
from above. Be sure to check the version string on the
installation CD.
- To enable ASM's hard drive firmware update feature on RHEL 64-bit
systems, you must ensure that the "sg" module is loaded in the
kernel. To load the module manually (if it is not loaded already),
use the command "modprobe sg".
2.5 Debian Linux Setup Notes
- You can use the ASM GUI on Debian Linux 5.x only if you install
the GNOME desktop. Due to a compatibility issue with X11, the
default KDE desktop is not supported in this release.
- To ensure that the ASM Agent starts automatically when Debian
is rebooted, you must update the default start and stop values
in /etc/init.d/stor_agent, as follows:
·[Original]
# Default-Start: 2 3 5
# Default-Stop: 0 1 2 6
·[Modification]
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
To activate the changes, execute 'insserv stor_agent', as root.
--------------------------------------------------------------------
3. Adaptec Storage Manager General Cautions and Notes
3.1 General Cautions
- This release supports a maximum of 8 concurrent online capacity
expansion (OCE) tasks in the RAID array migration wizard.
- While building or clearing a logical drive, do not remove and
re-insert any drive from that logical drive. Doing so may cause
unpredictable results.
- Do not move disks comprising a logical drive from one controller
to another while the power is on. Doing so could cause the loss of
the logical drive configuration or data, or both. Instead, power
off both affected controllers, move the drives, and then restart.
- When using Adaptec Storage Manager and the CLI concurrently,
configuration changes may not appear in the Adaptec Storage
Manager GUI until you refresh the display (by pressing F5).
3.2 General Notes
- Adaptec Storage Manager requires the following range of ports
to be open for remote access: 34570-34580 (TCP), 34570 (UDP),
34577-34580 (UDP).
- Adaptec Storage Manager generates log files automatically to
assist in tracking system activity. The log files are
created in the directory where Adaptec Storage Manager is
installed.
o RaidEvt.log - Contains the information reported in
Adaptec Storage Manager event viewer for all
local and remote systems.
o RaidEvtA.log - Contains the information reported in
Adaptec Storage Manager event viewer for the
local system.
o RaidNot.log - Contains the information reported in the
Notification Manager event viewer.
o RaidErr.log - Contains Java messages generated by
Adaptec Storage Manager.
o RaidErrA.log - Contains Java messages generated by the
Adaptec Storage Manager agent.
o RaidCall.log - Contains the information reported when
statistics logging is enabled in ASM.
Information written to these files is appended to the existing
files to maintain a history. However, when an error log file
reaches a size of 5 Mbytes, it is copied to a new file with
the extension .1 and the original (that is, the .LOG file) is
deleted and recreated. For other log files, a .1 file is created
when the .LOG file reaches a size of 1 Mbyte. If a .1 file already
exists, the existing .1 file is destroyed.
- In the Event viewer, Adaptec Storage Manager reports both the
initial build task for a logical drive and a subsequent Verify/Fix
as a "Build/Verify" task.
- When displaying information about a physical device, the device,
vendor and model information may be displayed incorrectly.
- After using a hot spare to successfully rebuild a redundant
logical drive, Adaptec Storage Manager will continue to
show the drive as a global hot spare. To remove the hot spare
designation, delete it in Adaptec Storage Manager.
--------------------------------------------------------------------
4. Operating System-Specific Issues and Notes
4.1 Windows - All
- The Java Virtual Machine has a problem with the 256-color
palette. (The Adaptec Storage Manager display may be distorted
or hard to read.) Set the Display Properties Settings to a
color mode with greater than 256 colors.
- When you shut down Windows, you might see the message
"unexpected shutdown". Windows displays this message if the
Adaptec Storage Manager Agent fails to exit within 3 seconds.
It has no effect on file I/O or other system operations and can
be ignored.
4.2 Windows 64-Bit
- Adaptec RAID controllers do not produce an audible alarm on the
following 64-bit Windows operating systems:
o Windows Server 2003 x64 Edition (all versions)
4.3 Linux
- When you delete a logical drive, the operating system can no longer
see the last logical drive. WORKAROUND: To allow Linux to see the
last logical drive, restart your system.
- The controller does not support attached CD drives during OS
installation.
- On certain versions of Linux, you may see messages concerning font
conversion errors. Font configuration under X-Windows is a known
JVM problem. It does not affect the proper operation of the
Adaptec Storage Manager software. To suppress these messages,
add the following line to your .Xdefaults file:
stringConversionWarnings: False
4.4 Debian and Ubuntu
- To create logical drives on Debian and Ubuntu installations, you
must log in as root. It is not sufficient to start ASM with the
'sudo /usr/StorMan/StorMan.sh' command (when not logged in as
root). WORKAROUND: To create logical drives on Ubuntu when not
logged in as root, install the package 'sudo dpkg -i storm_6.50-15645_amd64.deb'.
4.5 FreeBSD
- On FreeBSD systems, JBOD disks created with Adaptec Storage Manager
are not immediately available to the OS. You must reboot the
system before you can use the JBOD.
4.6 Fedora and FreeBSD
- Due to an issue with the Java JDialog Swing class, the 'Close'
button may not appear on some Adaptec Storage Manager windows
or dialog boxes under FreeBSD or Fedora Linux 15 or higher.
WORKAROUND: Press ALT+F4 or right-click on the title bar, then
close the dialog box from the pop-up menu.
4.7 Linux and FreeBSD
- If you cannot connect to a local or remote Adaptec Storage Manager
installed on a Linux or FreeBSD system, verify that the TCP/IP hosts
file is configured properly.
1. Open the /etc/hosts file.
NOTE: The following is an example:
127.0.0.1 localhost.localdomain localhost matrix
2. If the hostname of the system is identified on the line
with 127.0.0.1, you must create a new host line.
3. Remove the hostname from the 127.0.0.1 line.
NOTE: The following is an example:
127.0.0.1 localhost.localdomain localhost
4. On a new line, type the IP address of the system.
5. Using the Tab key, tab to the second column and enter the
fully qualified hostname.
6. Using the Tab key, tab to the third column and enter the
nickname for the system.
NOTE: The following is an example of a completed line:
1.1.1.1 matrix.localdomain matrix
where 1.1.1.1 is the IP address of the server and
matrix is the hostname of the server.
7. Restart the server for the changes to take effect.
4.8 VMware
- If you are unable to connect to VMware ESX Server from a
remote ASM GUI, even though it appears in the Enterprise
View as a remote system, most likely, some required ports
are open and others are not. (The VMware ESX firewall blocks
most ports, by default.) Check to make sure that all ports
34570 thru 34581 are opened on the ESX server.
- After making array configuration changes in VMware, you must
run the "esxcfg-rescan" tool manually at the VMware console
to notify the operating system of the new target characteristics
and/or availability. Alternatively, you can rescan from the
Virtual Infrastructure Client: click on the host in the left
panel, select the Configuration tab, choose "Storage Adapters",
then, on the right side of the screen, click "Rescan".
- With VMware ESX 4.1, the OS command 'esxcfg-scsidevs -a'
incorrectly identifies the Adaptec ASR-5445 controller as
"Adaptec ASR5800". (ASM itself identifies the controller
correctly.) To verify the controller name at the OS level,
use this command to check the /proc file system:
# cat /proc/scsi/aacraid/<Node #>
where <Node #> is 1, 2, 3 etc.
--------------------------------------------------------------------
5. RAID Level-Specific Notes
5.1 RAID 1 and RAID 5 Notes
- During a logical device migration from RAID 1 or RAID 5 to
RAID 0, if the original logical drive had a spare drive
attached, the resulting RAID 0 retains the spare drive.
Since RAID 0 is not redundant, you can remove the hot spare.
5.2 RAID 10 Notes
- If you force online a failed RAID 10, ASM erroneously shows two
drives rebuilding (the two underlying member drives), not one.
- You cannot change the priority of a RAID 10 verify. Setting
the priority at the start of a verify has no effect. The
priority is still shown as high. Changing the priority of
a running verify on a RAID-10 changes the displayed priority
until a rescan is done, then the priority shows as high again.
- Performing a Verify or Verify/Fix on an RAID 10 displays the
same message text in the event log: "Build/Verify started on
second level logical drive of 'LogicalDrive_0.'" You may see the
message three times for a Verify, but only once for a Verify/Fix.
5.3 RAID x0 Notes
- To create a RAID x0 with an odd number of drives (15, 25, etc),
specify an odd number of second-level devices in the Advanced
settings for the array. For a 25 drive RAID 50, for instance,
the default is 24 drives.
NOTE: This differs from the BIOS utility, which creates RAID x0
arrays with an odd number of drives by default.
- After building or verifying a leg of a second-level logical drive,
the status of the second-level logical drive is displayed as a
"Quick Initialized" drive.
5.4 RAID Volume Notes
- In ASM, a failed RAID Volume comprised of two RAID 1 logical
drives is erroneously reported as a failed RAID 10. A failed
RAID Volume comprised of two RAID 5 logical drives is
erroneously reported as a failed RAID 50.
5.5 JBOD Notes
- In this release, ASM deletes partitioned JBODs without issuing
a warning message.
- When migrating a JBOD to a Simple Volume, the disk must be quiescent
(no I/O load). Otherwise, the migration will fail with an I/O Read
error.
5.6 Hybrid RAID Notes
- ASM supports Hybrid RAID 1 and RAID 10 logical drives comprised
of hard disk drives and Solid State Drives (SSDs). For a Hybrid
RAID 10, you must select an equal number of SSDs and HDDs in
“every other drive” order, that is: SSD—HDD—SSD—HDD, and so on.
Failure to select drives in this order creates a standard
logical drive that does not take advantage of SSD performance.
5.7 RAID-Level Migration (RLM) Notes
- We strongly recommend that you use the default 256KB stripe
size for all RAID-level migrations. Choosing a different stripe
size may crash the system.
- If a disk error occurs when migrating a 2TB RAID 0 to RAID 5
(eg, bad blocks), ASM displays a message that the RAID 5 drive
is reconfiguring even though the migration failed and no
RAID-level migration task is running. To recreate the
logical drive, fix or replace the bad disk, delete the RAID 5
in ASM, then try again.
- When migrating a RAID 5EE, be careful not to remove and re-insert
a drive in the array. If you do, the drive will not be included
when the array is rebuilt. The migration will stop and the drive
will be reported as Ready (not part of array).
NOTE: We strongly recommend that you do not remove and re-insert
any drive during a RAID-level migration.
- When migrating a RAID 6 to a RAID 5, the migration will fail if
the (physical) drive order on the target logical device differs
from the source; for instance, migrating a four-drive RAID 6 to
a three-drive RAID 5.
- Migrating a RAID 5 with greater than 2TB capacity to RAID 6 or
RAID 10 is not supported in this release. Doing so may crash
the system.
- When migrating from a RAID 0 to any redundant logical drive,
like RAID 5 or 10, Adaptec Storage Manager shows the status as
"Degraded Reconfiguring" for a moment, then the status changes
to "Reconfiguring." The "Degraded" status does not appear in
the event log.
- The following RAID-level migrations and online capacity
expansions (OCE) are NOT supported:
o RAID 50 to RAID 5 RLM
o RAID 60 to RAID 6 RLM
o RAID 50 to RAID 60 OCE
- During a RAID-level migration, ASM and the BIOS utility show
different RAID levels while the migration is in progress. ASM shows
the target RAID level; the BIOS utility shows the current RAID level.
- If a disk error occurs during a RAID-level migration (eg, bad blocks),
the exception is reported in the ASM event viewer (bottom pane)
and in the support archive file (Support.zip, Controller 1 logs.txt),
but not in the main ASM Event Log file, RaidEvtA.log.
- Always allow a RAID-level migration to complete before gathering
support archive information in Support.zip. Otherwise, the Support.zip
file will include incorrect partition information. Once the RLM is
complete, the partition information will be reported correctly.
--------------------------------------------------------------------
6. Power Management Issues and Notes
- You must use a compatible combination of Adaptec Storage Manager
and controller firmware and driver software to use the power
management feature. All software components must support power
management. You can download the latest controller firmware
and drivers from the Adaptec Web site at www.adaptec.com.
- Power management is not supported under FreeBSD.
- Power management settings apply only to logical drives in the
Optimal state. If you change the power settings on a Failed
logical drive, then force the drive online, the previous
settings are reinstated.
- After setting power values for a logical drive in ARCCONF, the
settings are not updated in the Adaptec Storage Manager GUI.
--------------------------------------------------------------------
7. "Call Home" Issues and Notes
- The Call Home feature is not supported in this release. To gather
statistics about your system for remote analysis, enable statistics
logging in ASM, then create a Call Home Support Archive. For more
information, see the user's guide.
--------------------------------------------------------------------
8. ARCCONF Issues and Notes
- With VMware ESX 4.1, you cannot delete a logical drive
with ARCCONF. WORKAROUND: Connect to the VMware machine from a
remote ASM GUI, then delete the logical drive.
- With Linux kernel versions 2.4 and 2.6, the ARCCONF
DELETE <logical_drive> command may fail with a Kernel Oops
error message. Even though the drives are removed from the
Adaptec Storage Manager GUI, they may not really be deleted.
Reboot the controller; then, issue the ARCCONF DELETE command
again.
--------------------------------------------------------------------
9. Other Issues and Notes
- Some solid state drives identify themselves as ROTATING media.
As a result, these SSDs:
o Appear as SATA drives in the ASM Physical Devices View
o Cannot be used as Adaptec maxCache devices
o Cannot be used within a hybrid RAID array (comprised of
SSDs and hard disks)
- The blink pattern on Adaptec Series 6/6Q/6E/6T controllers differs
from Series 2 and Series 5 controllers:
o When blinking drives in ASM, the red LED goes on and stays solid;
on Series 2 and 5 controllers, the LED blinks on and off.
o When failing drives in ASM (using the 'Set drive state to failed'
action), the LED remains off; on Series 2 and 5 controllers, the
LED goes on and remains solid.
- Cache settings for RAID Volumes (Read cache, Write cache, maxCache)
have no effect. The cache settings for the underlying logical
devices take priority.
- On rare occasions, ASM will report invalid medium error counts on
a SATA hard drive or SSD. To correct the problem, use ARCCONF to
clear the device counts. The command is:
arcconf getlogs <Controller_ID> DEVICE clear
- On rare occasions, ASM lists direct-attached hard drives and SSDs
as drives in a virtual SGPIO enclosure. Normally, the drives are
listed in the Physical Devices View under ports CN0 and CN1.
- Hard Drive Firmware Update Wizard:
o Firmware upgrade on Western Digital WD5002ABYS-01B1B0 hard drives
is not supported for packet sizes below 2K (512/1024).
o After flashing the firmware of a Seagate Barracuda ES ST3750640NS
hard drive, you MUST cycle the power before ASM will show the new
image. You can pull out and re-insert the drive; power cycle the
enclosure; or power cycle the system if the drive is attached directly.
- Secure Erase:
o If you reboot the system while a Secure Erase operation is in
progress, the affected drive may not be displayed in Adaptec
Storage Manager or other Adaptec utilities, such as the ACU.
o You can perform a Secure Erase on a Solid State Drive (SSD) to
remove the metadata. However, the drive will move to the Failed
state when you reboot the system. To use the SSD, reboot to
the BIOS, then initialize the SSD. After initialization, the SSD
will return to the Ready state. (A SSD in the Failed state cannot
be initialized in ASM.)
- The Repair option in the ASM Setup program may fail to fix a
corrupted installation, depending on which files are affected.
The repair operation completes successfully, but the software
remains unfixed.
- Adaptec Storage Manager may fail to exit properly when you create
64 logical devices in the wizard. The logical devices are still
created, however.
- The "Clear logs on all controllers" action does not clear events
in the ASM Event Viewer (GUI). It clears device events, defunct
drive events, and controller events in the controllers' log files.
To clear events in the lower pane of the GUI, select Clear
configuration event viewer from the File menu.
- Stripe Size Limits for Large Logical Drives:
The stripe size limit for logical drives with more than 8 hard
drives is 512KB; for logical drives with more than 16 hard
drives it is 256KB.
- Agent Crashes when Hot-Plugging an Enclosure:
With one or more logical drives on an enclosure, removing
the enclosure cable from the controller side may crash
the ASM Agent.
--------------------------------------------------------------------
(c) 2012 PMC-Sierra, Inc. All Rights Reserved.
This software is protected under international copyright laws and
treaties. It may only be used in accordance with the terms
of its accompanying license agreement.
The information in this document is proprietary and confidential to
PMC-Sierra, Inc., and for its customers' internal use. In any event,
no part of this document may be reproduced or redistributed in any
form without the express written consent of PMC-Sierra, Inc.,
1380 Bordeaux Drive, Sunnyvale, CA 94089.
P/N DOC-01700-02-A Rev A

BIN
i386/7.31/arcconf Executable file

Binary file not shown.

BIN
i386/7.31/libstdc++.so.5 Executable file

Binary file not shown.

1
i386/centos5/libstdc++.so.6 Symbolic link
View File

@ -0,0 +1 @@
libstdc++.so.6.0.8

BIN
i386/centos5/libstdc++.so.6.0.8 Executable file

Binary file not shown.