Compare commits

..

No commits in common. "master" and "pristine-tar" have entirely different histories.

36 changed files with 1 additions and 14007 deletions

View File

@ -1,2 +0,0 @@
Stephen M. Cameron
Christian Hofstaedtler

342
COPYING
View File

@ -1,342 +0,0 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.

142
ChangeLog
View File

@ -1,142 +0,0 @@
Tue Sep 2 12:14:04 CDT 2008
Added fan, temperature and power supply status
reporting (thanks to Christian Hofstaedtler)
Tue Sep 19 14:55:25 CDT 2006
Autoconfiscated cciss_vol_status
Tue Mar 6 14:44:14 EST 2007
Added support for more than 16 logical drives.
Added -x option for exhaustive search
Mon Nov 2 04:56:55 CST 2009
Added support for hpsa driver
Added support for hpahcisr driver
Added support for new controllers:
Smart Array P700m
Smart Array P212
Smart Array P410
Smart Array P410i
Smart Array P411
Smart Array P812
Cache some serial numbers to cut down on redundant i/o
when rummaging around trying to figure out what's what.
Assume 16 possible storage boxes for SAS based controllers
Wed Nov 18 10:18:22 MST 2009
* Fixed bug that if a logical drive had an active spare, and thus was
"ok", the exit code was still zero, so it acted as though nothing
were wrong, even though the failed drive needed replacing to get back
to original good status with spares.
* Fixed bug in spare status messages. One message was left out, and so
some of the others were wrong, being off-by-one.
* Bumped version up to 1.06
2010/05/20 07:12:06
* Change weird "uint" to normal "unsigned int" Thanks to Frank Bergmann for this patch.
* Fix strnlen that should have been a strlen. Thanks to Frank Bergmann for noticing this.
2010/10/11 09:41:23
* get rid of typedefs
2010/10/13 07:02:37
* cosmetic whitespace fixes
Date: 2010/10/13 07:40:06
* Do not treat hpsa and hpahcisr as if they were MSA1000, but instead treat
as cciss devices. This means, use the CCISS_PASSTHRU ioctl, not SG_IO
(the drivers for the MSA1000 are qlogic or emulex, and do not have the
CCISS_PASSTHRU ioctl, and so must use SG_IO. The difference in power between
the SG_IO and CCISS_PASSTHRU is mainly that the CCISS_PASSTHRU allows specifying
the 8-byte LUNID, and thus can aim commands at any attached device, whereas
SG_IO is aimed by means of which device node you open. However, there
are devices (e.g. external controllers, MSA20, etc.) which do not have any
exposed device nodes and so are unreachable by SG_IO. By treating hpsa and
hpahcisr as cciss, we get access to those devices.
* Factor out msa1000_status()
* Cleaned up -Wall warnings.
* Factor out device type sanity checking code into cciss_device_type_is_correct(),
and get rid of the ugly goto for hpsa and hpahcisr cases.
* Factor out cciss_logical_drive_status()
* Rename the final parameter of cciss_logical_drive_status from 'i' to more
sensible 'volume_number'
* Make all functions static
2010/10/14 09:36:32
* Zero out controller_lun_list at the beginning init_cciss_to_bmic and num_controllers.
init_cciss_to_bmic is called once per controller on the command line to find external
controllers, and should be zeroed out each time.
2010/11/05 08:44:13
* Provided local cciss_ioctl.h and cciss_defs.h to aid distros which
come with a broken variant of cciss_ioctl.h, and added instructions in
INSTALL which explain how to use these fixed headers.
* Added note about aclocal-1.10, and corrected note about how to deal with
broken cciss_ioctl.h header files.
* Clarified that configure failing to #define __user is not the only reason
that cciss_ioctl.h might not compile.
* Added linux_alternate_makefile.mk to allow sidestepping autoconf problems.
2010/11/19 14:54:44
* Now reports physical drive serial numbers, firmware revision, connector, box and bay information.
* Factor out find_bus_target() function
* Factor out format_phys_drive_location()
* Report S.M.A.R.T. predictive failures
Changes since 1.07:
2010/12/02 09:35:54
* Added examples to man page of S.M.A.R.T predictive failure reporting.
* make it compile on freebsd
* Fix a file descriptor leak
Changes since 1.08:
2010/12/03 08:23:26
* Remove unused bogus variable declarations at the end of a function
that didn't compile on older gcc versions. (Thanks to Simon Matter)
* Print error information if sense bus parameters encounters a target
status.
* Remove bogus incorrect initialization of controller_lun_list (it's
done later down in the code correctly.)
* Make it compile with no warnings after "configure CFLAGS=-Wall"
Changes since 1.09:
* Clean up uninitialized variables detected by valgrind.
* Added some new smart array controllers to the list of known
controllers
* Replace the too specific is_hpsa() and is_hpahcisr() functions with
a more generic is_smart_array(). This was preventing -u option from
working with the hpsa driver.
* Remove inquiry_vendor_model_matches() function which is now no
longer used.
* Added -W and -Wall flags to gcc in linux_alternate_makefile.mk
and fixed up all the warnings that those found.
* Add -V (verbose) option which prints out extra information
about the controller (board ID, running firmware revision,
ROM firmware revision, and number of logical drives).
* Make the --verbose option print out more information about the
controllers and physical drives. For each controller, the board ID,
number of logical drives, currently running firmware revision and ROM
firmware revision are printed. For each physical drive, the location,
vendor, model, serial number, and firmware revision are printed.
* Added .gitignore and cvsignore files
* regenerated configure, aclocal.m4, and Makefile.in on RHEL6u2.
* Made -p shortcut for --persnickety actualy work.
Changes since 1.10
* Added support for new controllers
* Now can report status of nonvolatile cache
* Misc. code cleanup and refactoring
* Do not spin up sleeping spare drives. This is done by using
"extended" CISS_REPORT_LUNS to obtain the device type instead of
sending inquiries to every device returned by standard
CISS_REPORT_LUNS to get the device type.

75
INSTALL
View File

@ -1,75 +0,0 @@
Just type
./configure
make
and, as root:
make install
The "make install" will put cciss_vol_status into /usr/bin,
and cciss_vol_status.8.gz into /usr/share/man/man8
To uninstall, as root:
make uninstall
This will remove /usr/share/man/man8/cciss_vol_status.8.gz
and /usr/bin/cciss_voL_status
===================================================
Notes that may help with getting things to compile:
===================================================
Note: If configure complains about cciss_ioctl.h not compiling,
it might be because in the kernel header, there is an attribute "__user"
which configure fails to #define out of existence. (cciss_vol_status.c
does do this.) You can safely ignore this warning from configure, as
the cciss_vol_status code does #define __user precisely because of
this. However, it may be the case, esp. if your distro is quite old
that cciss_ioctl.h does not compile for another reason (see below).
---
Note: If "make" gives you a message such as:
WARNING: `aclocal-1.10' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the `README' file,
it often tells you about the needed prerequirements for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing `aclocal-1.10' program.
You can often get around this by doing the following:
scameron@zuul:~/test/cciss_vol_status$ aclocal
scameron@zuul:~/test/cciss_vol_status$ autoconf
scameron@zuul:~/test/cciss_vol_status$ automake
scameron@zuul:~/test/cciss_vol_status$ ./configure
...
scameron@zuul:~/test/cciss_vol_status$ make
Or, you can try to sidestep autoconf and its ornery friends, and
use linux_alternate_makefile.mk:
make -f linux_alternate_makefile.mk
and as root:
make -f linux_alternate_makefile.mk install
Or, you can dig around looking for aclocal-1.10
---
Note: Some old distros (e.g. debian Sarge) contain a broken
version of include/linux/cciss_ioctl.h which doesn't compile at all.
Your best bet here is to get a newer version of cciss_ioctl.h which
doesn't have that problem. There are recent (circa 2010) cciss header
files contained here, cciss_ioctl.h and cciss_defs.h. You can try
using these instead of your distro's header files by doing the
following:
./configure CFLAGS=-DUSE_LOCAL_CCISS_HEADERS
make

View File

@ -1,3 +0,0 @@
bin_PROGRAMS = cciss_vol_status
cciss_vol_status_SOURCES = cciss_vol_status.c cciss_defs.h cciss_ioctl.h
dist_man8_MANS = cciss_vol_status.8

View File

@ -1,825 +0,0 @@
# Makefile.in generated by automake 1.15 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
bin_PROGRAMS = cciss_vol_status$(EXEEXT)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man8dir)"
PROGRAMS = $(bin_PROGRAMS)
am_cciss_vol_status_OBJECTS = cciss_vol_status.$(OBJEXT)
cciss_vol_status_OBJECTS = $(am_cciss_vol_status_OBJECTS)
cciss_vol_status_LDADD = $(LDADD)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(cciss_vol_status_SOURCES)
DIST_SOURCES = $(cciss_vol_status_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(dist_man8_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
AM_RECURSIVE_TARGETS = cscope
am__DIST_COMMON = $(dist_man8_MANS) $(srcdir)/Makefile.in \
$(srcdir)/config.h.in AUTHORS COPYING ChangeLog INSTALL NEWS \
README compile depcomp install-sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
cciss_vol_status_SOURCES = cciss_vol_status.c cciss_defs.h cciss_ioctl.h
dist_man8_MANS = cciss_vol_status.8
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
.SUFFIXES: .c .o .obj
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p \
; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' \
-e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' \
`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && rm -f $$files
clean-binPROGRAMS:
-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
cciss_vol_status$(EXEEXT): $(cciss_vol_status_OBJECTS) $(cciss_vol_status_DEPENDENCIES) $(EXTRA_cciss_vol_status_DEPENDENCIES)
@rm -f cciss_vol_status$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(cciss_vol_status_OBJECTS) $(cciss_vol_status_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cciss_vol_status.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
install-man8: $(dist_man8_MANS)
@$(NORMAL_INSTALL)
@list1='$(dist_man8_MANS)'; \
list2=''; \
test -n "$(man8dir)" \
&& test -n "`echo $$list1$$list2`" \
|| exit 0; \
echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
{ for i in $$list1; do echo "$$i"; done; \
if test -n "$$list2"; then \
for i in $$list2; do echo "$$i"; done \
| sed -n '/\.8[a-z]*$$/p'; \
fi; \
} | while read p; do \
if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; echo "$$p"; \
done | \
sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
sed 'N;N;s,\n, ,g' | { \
list=; while read file base inst; do \
if test "$$base" = "$$inst"; then list="$$list $$file"; else \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
fi; \
done; \
for i in $$list; do echo "$$i"; done | $(am__base_list) | \
while read files; do \
test -z "$$files" || { \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
done; }
uninstall-man8:
@$(NORMAL_UNINSTALL)
@list='$(dist_man8_MANS)'; test -n "$(man8dir)" || exit 0; \
files=`{ for i in $$list; do echo "$$i"; done; \
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS) $(MANS) config.h
installdirs:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man8dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
distclean: distclean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am: install-man
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-binPROGRAMS
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man: install-man8
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binPROGRAMS uninstall-man
uninstall-man: uninstall-man8
.MAKE: all install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-am clean \
clean-binPROGRAMS clean-cscope clean-generic cscope \
cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-compile distclean-generic \
distclean-hdr distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-binPROGRAMS install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man8 install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-binPROGRAMS uninstall-man \
uninstall-man8
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

0
NEWS
View File

2
README
View File

@ -1,2 +0,0 @@
See INSTALL for instructions about installing this software.
See COPYING for information about redistributing this software.

1152
aclocal.m4 vendored

File diff suppressed because it is too large Load Diff

Binary file not shown.

View File

@ -0,0 +1 @@
6bfe54e65f50633d623df1cac571d366c94d1fa4

View File

@ -1,130 +0,0 @@
#ifndef CCISS_DEFS_H
#define CCISS_DEFS_H
#include <linux/types.h>
/* general boundary definitions */
#define SENSEINFOBYTES 32 /* note that this value may vary
between host implementations */
/* Command Status value */
#define CMD_SUCCESS 0x0000
#define CMD_TARGET_STATUS 0x0001
#define CMD_DATA_UNDERRUN 0x0002
#define CMD_DATA_OVERRUN 0x0003
#define CMD_INVALID 0x0004
#define CMD_PROTOCOL_ERR 0x0005
#define CMD_HARDWARE_ERR 0x0006
#define CMD_CONNECTION_LOST 0x0007
#define CMD_ABORTED 0x0008
#define CMD_ABORT_FAILED 0x0009
#define CMD_UNSOLICITED_ABORT 0x000A
#define CMD_TIMEOUT 0x000B
#define CMD_UNABORTABLE 0x000C
/* transfer direction */
#define XFER_NONE 0x00
#define XFER_WRITE 0x01
#define XFER_READ 0x02
#define XFER_RSVD 0x03
/* task attribute */
#define ATTR_UNTAGGED 0x00
#define ATTR_SIMPLE 0x04
#define ATTR_HEADOFQUEUE 0x05
#define ATTR_ORDERED 0x06
#define ATTR_ACA 0x07
/* cdb type */
#define TYPE_CMD 0x00
#define TYPE_MSG 0x01
/* Type defs used in the following structs */
#define BYTE __u8
#define WORD __u16
#define HWORD __u16
#define DWORD __u32
#define CISS_MAX_LUN 1024
#define LEVEL2LUN 1 /* index into Target(x) structure, due to byte swapping */
#define LEVEL3LUN 0
#pragma pack(1)
/* Command List Structure */
typedef union _SCSI3Addr_struct {
struct {
BYTE Dev;
BYTE Bus:6;
BYTE Mode:2; /* b00 */
} PeripDev;
struct {
BYTE DevLSB;
BYTE DevMSB:6;
BYTE Mode:2; /* b01 */
} LogDev;
struct {
BYTE Dev:5;
BYTE Bus:3;
BYTE Targ:6;
BYTE Mode:2; /* b10 */
} LogUnit;
} SCSI3Addr_struct;
typedef struct _PhysDevAddr_struct {
DWORD TargetId:24;
DWORD Bus:6;
DWORD Mode:2;
SCSI3Addr_struct Target[2]; /* 2 level target device addr */
} PhysDevAddr_struct;
typedef struct _LogDevAddr_struct {
DWORD VolId:30;
DWORD Mode:2;
BYTE reserved[4];
} LogDevAddr_struct;
typedef union _LUNAddr_struct {
BYTE LunAddrBytes[8];
SCSI3Addr_struct SCSI3Lun[4];
PhysDevAddr_struct PhysDev;
LogDevAddr_struct LogDev;
} LUNAddr_struct;
typedef struct _RequestBlock_struct {
BYTE CDBLen;
struct {
BYTE Type:3;
BYTE Attribute:3;
BYTE Direction:2;
} Type;
HWORD Timeout;
BYTE CDB[16];
} RequestBlock_struct;
typedef union _MoreErrInfo_struct{
struct {
BYTE Reserved[3];
BYTE Type;
DWORD ErrorInfo;
} Common_Info;
struct{
BYTE Reserved[2];
BYTE offense_size; /* size of offending entry */
BYTE offense_num; /* byte # of offense 0-base */
DWORD offense_value;
} Invalid_Cmd;
} MoreErrInfo_struct;
typedef struct _ErrorInfo_struct {
BYTE ScsiStatus;
BYTE SenseLen;
HWORD CommandStatus;
DWORD ResidualCnt;
MoreErrInfo_struct MoreErrInfo;
BYTE SenseInfo[SENSEINFOBYTES];
} ErrorInfo_struct;
#pragma pack()
#endif /* CCISS_DEFS_H */

View File

@ -1,117 +0,0 @@
#ifndef CCISS_IOCTLH
#define CCISS_IOCTLH
#warning "Using local cciss_ioctl.h and cciss_defs.h"
#include <linux/types.h>
#include <linux/ioctl.h>
#include "cciss_defs.h"
#define CCISS_IOC_MAGIC 'B'
typedef struct _cciss_pci_info_struct
{
unsigned char bus;
unsigned char dev_fn;
unsigned short domain;
__u32 board_id;
} cciss_pci_info_struct;
typedef struct _cciss_coalint_struct
{
__u32 delay;
__u32 count;
} cciss_coalint_struct;
typedef char NodeName_type[16];
typedef __u32 Heartbeat_type;
#define CISS_PARSCSIU2 0x0001
#define CISS_PARCSCIU3 0x0002
#define CISS_FIBRE1G 0x0100
#define CISS_FIBRE2G 0x0200
typedef __u32 BusTypes_type;
typedef char FirmwareVer_type[4];
typedef __u32 DriverVer_type;
#define MAX_KMALLOC_SIZE 128000
typedef struct _IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
ErrorInfo_struct error_info;
WORD buf_size; /* size in bytes of the buf */
BYTE __user *buf;
} IOCTL_Command_struct;
typedef struct _BIG_IOCTL_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
ErrorInfo_struct error_info;
DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
DWORD buf_size; /* size in bytes of the buf */
/* < malloc_size * MAXSGENTRIES */
BYTE __user *buf;
} BIG_IOCTL_Command_struct;
typedef struct _LogvolInfo_struct{
__u32 LunID;
int num_opens; /* number of opens on the logical volume */
int num_parts; /* number of partitions configured on logvol */
} LogvolInfo_struct;
#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct)
#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct)
#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct)
#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type)
#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type)
#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type)
#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type)
#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type)
#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type)
#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10)
#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct)
#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12)
/* no longer used... use REGNEWD instead */
#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int)
#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14)
#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16)
#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct)
#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct)
#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
/* 32 bit compatible ioctl structs */
typedef struct _IOCTL32_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
ErrorInfo_struct error_info;
WORD buf_size; /* size in bytes of the buf */
__u32 buf; /* 32 bit pointer to data buffer */
} IOCTL32_Command_struct;
typedef struct _BIG_IOCTL32_Command_struct {
LUNAddr_struct LUN_info;
RequestBlock_struct Request;
ErrorInfo_struct error_info;
DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */
DWORD buf_size; /* size in bytes of the buf */
/* < malloc_size * MAXSGENTRIES */
__u32 buf; /* 32 bit pointer to data buffer */
} BIG_IOCTL32_Command_struct;
#define CCISS_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 11, IOCTL32_Command_struct)
#define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct)
#endif /* CONFIG_COMPAT */
#endif /* __KERNEL__ */
#endif

View File

@ -1,339 +0,0 @@
.\" Copyright (C) 2006,2007,2012,2013 Hewlett-Packard Development Company, L.P.
.\"
.\"
.\" Copyright 2006,2007,2012,2013 Hewlett-Packard Development Company, L.P.
.\"
.\" Author: Stephen M. Cameron
.\"
.\" This file is part of cciss_vol_status.
.\"
.\" cciss_vol_status is free software; you can redistribute it and/or modify
.\" it under the terms of the GNU General Public License as published by
.\" the Free Software Foundation; either version 2 of the License, or
.\" (at your option) any later version.
.\"
.\" cciss_vol_status is distributed in the hope that it will be useful,
.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
.\" GNU General Public License for more details.
.\"
.\" You should have received a copy of the GNU General Public License
.\" along with cciss_vol_status; if not, write to the Free Software
.\" Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
.\"
.TH CCISS_VOL_STATUS "8" "May 2013" "cciss_vol_status (ccissutils) " ""
.SH NAME
cciss_vol_status \- show status of logical drives attached to HP Smartarray controllers
.SH SYNOPSIS
.B cciss_vol_status
[\fIOPTION\fR] [\fIDEVICE\fR]...
.SH DESCRIPTION
.\" Add any additional description here
.PP
Shows the status of logical drives configured on HP Smartarray
controllers.
.SH OPTIONS
.TP
\fB\-p, --persnickety\fR
Without this option, device nodes which can't be opened, or which
are not found to be of the correct device type are silently ignored.
This lets you use wildcards, e.g.: cciss_vol_status /dev/sg* /dev/cciss/c*d0,
and the program will not complain as long as all devices which are found
to be of the correct type are found to be ok. However, you may wish
to explicitly list the devices you expect to be there, and be notified
if they are not there (e.g. perhaps a PCI slot has died, and the system has
rebooted, so that what was once /dev/cciss/c1d0 is no longer there at
all). This option will cause the program to complain about any device
node listed which does not appear to be the right device type, or
is not openable.
.TP
\fB\-C, --copyright\fR
If stderr is a terminal, Print out a copyright message,
and exit.
.TP
\fB\-q, --quiet\fR
This option doesn't do anything.
Previously, without this option and if stderr is a
terminal, a copyright message precedes the normal program output.
Now, the copyright message is only printed via the -C option.
.TP
\fB\-s\fR
Query each physical drive for S.M.A.R.T data and report any drives
in "predictive failure" state.
.TP
\fB\-u, --try-unknown-devices\fR
If a device has an unrecognized board ID, normally the program will
not attempt to communicate with it. In case you have some Smart Array
controller which is newer than this program, the program may not
recognize it. This option permits the program to attempt to interrogate
the board even if it is unrecognized on the assumption that it is
in fact a Smart Array of some kind.
.TP
\fB\-v, --version\fR
Print the version number and exit.
.TP
\fB\-V, --verbose\fR
Print out more information about the controllers and physical drives.
For each controller, the board ID, number of logical drives, currently
running firmware revision and ROM firmware revision are printed. For
each physical drive, the location, vendor, model, serial number,
and firmware revision are printed.
.TP
\fB\-x, --exhaustive\fR
Deprecated. Previously, it "exhaustively" searched for logical
drives, as, under some circumstances some logical drives might
otherwise be missed. This option no longer does anything, as the
algorithm for finding logical drives was changed to obviate the
need for it.
.SH DEVICE
.PP
The DEVICE argument indicates which RAID controller is to be queried.
Note, that it indicates which RAID controller, not which logical drive.
.PP
For the cciss driver, the "d0" nodes matching "/dev/cciss/c*d0" are the
nodes which correspond to the RAID controllers. (See note 1, below.)
It is not necessary to invoke cciss_vol_status on each logical drive
individually, though if you do this, each time it will report the
status of ALL logical drives on the controller.
.PP
For the hpsa driver, or for fibre attached MSA1000 family devices, or
for the hpahcisr sotware RAID driver which emulates Smart Arrays,
the RAID controller
is accessed via the scsi generic driver, and the device nodes will
match "/dev/sg*" Some variants of the "lsscsi" tool will easily
identify which device node corresponds to the RAID controller. Some
variants may only report the SCSI nexus (controller/bus/target/lun
tuple.) Some distros may not have the lsscsi tool.
.PP
.br
Executing the following query to the /sys filesystem and correlating
this with the contents of /proc/scsi/scsi or output of lsscsi
can help in finding the right
/dev/sg node to use with cciss_vol_status:
.PP
.nf
.LD
wumpus:/home/scameron # ls -l /sys/class/scsi_generic/*
lrwxrwxrwx 1 root root 0 2009-11-18 12:31 /sys/class/scsi_generic/sg0 -> ../../devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:03.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0
lrwxrwxrwx 1 root root 0 2009-11-18 12:31 /sys/class/scsi_generic/sg1 -> ../../devices/pci0000:00/0000:00:1f.1/host2/target2:0:0/2:0:0:0/scsi_generic/sg1
lrwxrwxrwx 1 root root 0 2009-11-19 07:47 /sys/class/scsi_generic/sg2 -> ../../devices/pci0000:00/0000:00:05.0/0000:0e:00.0/host4/target4:3:0/4:3:0:0/scsi_generic/sg2
wumpus:/home/scameron # cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: COMPAQ Model: BD03685A24 Rev: HPB6
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: SAMSUNG Model: CD-ROM SC-148A Rev: B408
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi4 Channel: 03 Id: 00 Lun: 00
Vendor: HP Model: P800 Rev: 6.82
Type: RAID ANSI SCSI revision: 00
wumpus:/home/scameron # lsscsi
[0:0:0:0] disk COMPAQ BD03685A24 HPB6 /dev/sda
[2:0:0:0] cd/dvd SAMSUNG CD-ROM SC-148A B408 /dev/sr0
[4:3:0:0] storage HP P800 6.82 -
.DE
.fi
.PP
From the above you can see that /dev/sg2 corresponds to SCSI nexus 4:3:0:0,
which corresponds to the HP P800 RAID controller listed in /proc/scsi/scsi.
.SH EXAMPLE
.nf
.LD
[root@somehost]# cciss_vol_status -q /dev/cciss/c*d0
/dev/cciss/c0d0: (Smart Array P800) RAID 0 Volume 0 status: OK.
/dev/cciss/c0d0: (Smart Array P800) RAID 0 Volume 1 status: OK.
/dev/cciss/c0d0: (Smart Array P800) RAID 1 Volume 2 status: OK.
/dev/cciss/c0d0: (Smart Array P800) RAID 5 Volume 4 status: OK.
/dev/cciss/c0d0: (Smart Array P800) RAID 5 Volume 5 status: OK.
/dev/cciss/c0d0: (Smart Array P800) Enclosure MSA60 (S/N: USP6340B3F) on Bus 2, Physical Port 1E status: Power Supply Unit failed
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 0 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 1 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 2 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 3 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 4 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 5 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 6 status: OK.
/dev/cciss/c1d0: (Smart Array P800) RAID 5 Volume 7 status: OK.
[root@someotherhost]# cciss_vol_status -q /dev/sg0 /dev/cciss/c*d0
/dev/sg0: (MSA1000) RAID 1 Volume 0 status: OK. At least one spare drive.
/dev/sg0: (MSA1000) RAID 5 Volume 1 status: OK.
/dev/cciss/c0d0: (Smart Array P800) RAID 0 Volume 0 status: OK.
[root@localhost]# ./cciss_vol_status -s /dev/sg1
/dev/sda: (Smart Array P410i) RAID 0 Volume 0 status: OK.
connector 1I box 1 bay 1 HP DG072A9BB7 B365P6803PCP0633 HPD0 S.M.A.R.T. predictive failure.
[root@localhost]# echo $?
1
[root@localhost]# ./cciss_vol_status -s /dev/cciss/c0d0
/dev/cciss/c0d0: (Smart Array P800) RAID 0 Volume 0 status: OK.
connector 2E box 1 bay 8 HP DF300BB6C3 3LM08AP700009713RXUT HPD3 S.M.A.R.T. predictive failure.
/dev/cciss/c0d0: (Smart Array P800) Enclosure MSA60 (S/N: USP6340B3F) on Bus 2, Physical Port 2E status: OK.
[root@localhost cciss_vol_status]# ./cciss_vol_status --verbose /dev/sg0
Controller: Smart Array P420i
Board ID: 0x3354103c
Logical drives: 1
Running firmware: 3.42
ROM firmware: 3.42
/dev/sda: (Smart Array P420i) RAID 1 Volume 0 status: OK.
Physical drives: 2
connector 1I box 2 bay 1 HP EG1200FCVBQ KZG21NVD HPD1 OK
connector 2I box 2 bay 5 HP EG1200FCVBQ KZG20X7D HPD1 OK
/dev/sg0(Smart Array P420i:0): Non-Volatile Cache status:
Cache configured: Yes
Read cache memory: 81 MiB
Write cache memory: 735 MiB
Write cache enabled: Yes
Flash backed cache present
.DE
.fi
.SH DIAGNOSTICS
.PP
Normally, a logical drive in good working order should
report a status of "OK." Possible status values are:
.TP
"OK." (0) - The logical drive is in good working order.
.TP
"FAILED." (1) - The logical drive has failed, and no i/o to it is poosible.
Additionally, failed drives will be identified by connector, box and bay,
as well as vendor, model, serial number, and firmware revision.
.TP
"Using interim recovery mode." (3) - One or more drives has failed,
but not so many that the logical drive can no longer operate. The
failed drives should be replaced as soon as possible.
.TP
"Ready for recovery operation." (4) - Failed drive(s) have been
replaced, and the controller is about to begin rebuilding
redundant parity data.
.TP
"Currently recovering." (5) - Failed drive(s) have been replaced,
and the controller is currently rebuilding redundant parity
information.
.TP
"Wrong physical drive was replaced." (6) - A drive has failed, and
another (working) drive was replaced.
.TP
"A physical drive is not properly connected." (7) - There is some
cabling or backplane problem in the drive enclosure.
.TP
(From fwspecwww.doc, see cpqarray project on sourceforge.net):
Note: If the unit_status value is 6 (Wrong physical drive was replaced)
or 7 (A physical drive is not properly connected), the unit_status
of all other configured logical drives will be marked as
1 (Logical drive failed). This is to force the user to
correct the problem and to insure that once the problem
is corrected, the data will not have been corrupted by
any user action.
.TP
"Hardware is overheating." (8) - Hardware is too hot.
.TP
"Hardware was overheated." (9) - At some point in the past,
the hardware got too hot.
.TP
"Currently expannding." (10) - The controller is currently in the
process of expanding a logical drive.
.TP
"Not yet available." (11) - The logical drive is not yet finished
being configured.
.TP
"Queued for expansion." (12) - The logical drive will be expended
when the controller is able to begin working on it.
.PP
Additionally, the following messages may appear regarding spare
drive status:
.PP
.nf
.LD
"At least one spare drive designated"
"At least one spare drive activated and currently rebuilding"
"At least one activated on-line spare drive is completely rebuilt on this logical drive"
"At least one spare drive has failed"
"At least one spare drive activated"
"At least one spare drive remains available"
.DE
Active spares will be identified by connector, box and bay, as well
as by vendor, model, serial number, and firmware revision.
.fi
.PP
For each logical drive, the total number of failed
physical drives, if more than zero, will be reported as:
.TP
.nf
.LD
"Total of n failed physical drives detected on this logical drive."
.DE
.fi
.PP
with "n" replaced by the actual number, of course.
.PP
"Replacement" drives -- newly inserted drives that replace
a previously failed drive but are not yet finished rebuilding --
are also identified by connector, box and bay, as well as
by vendor, model, serial number, and firmware revision.
.PP
If the -s option is specified, each physical drive will be
queried for S.M.A.R.T data, any any drives in predictive failure
state will be reported, identified by connector, box and bay,
as well as vendor, model, serial number, and firmware revision.
.PP
Additionally failure conditions of disk enclosure fans,
power supplies, and temperature are reported as follows:
.PP
.nf
.LD
"Fan failed"
"Temperature problem"
"Door alert"
"Power Supply Unit failed"
.DE
.fi
.SH FILES
/dev/cciss/c*d0 (Smart Array PCI controllers using the cciss driver)
.br
/dev/sg* (Fibre attached MSA1000 controllers and
Smart Array controllers using the hpsa driver or
hpahcisr software RAID driver.)
.SH EXIT CODES
.TP
0 - All configured logical drives queried have status of "OK."
.TP
1 - One or more configured logical drives queried have status other than "OK."
.SH BUGS
.P
MSA500 G1 logical drive numbers may not be reported correctly.
.P
I've seen enclosure serial numbers contain garbage.
.P
Some Smart Arrays support more than 128 physical drives on a single RAID
controller. cciss_vol_status does not.
.SH AUTHOR
Written by Stephen M. Cameron
.SH "REPORTING BUGS"
.P
Report bugs to <scameron@beardog.cce.hp.com>
.SH COPYRIGHT
Copyright \(co 2007 Hewlett-Packard Development Company, L.P.
.br
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
.SH "SEE ALSO"
http://cciss.sourceforge.net
.SH note 1
The /dev/cciss/c*d0 device nodes of the cciss driver do double duty.
They serve as an access point to both the RAID controllers, and to the
first logical drive of each RAID controller. Notice that a /dev/cciss/c*d0
node will be present for each controller even if no logical drives are
configured on that controller. It might be cleaner if the driver had
a special device node just for the controller, instead of making these
device nodes do double duty. It has been like that since the 2.2
linux kernel timeframe. At that time, device major and minor nodes
were statically allocated at compile time, and were in short supply.
Changing this behavior at this point would break lots of userland
programs.
.FE

File diff suppressed because it is too large Load Diff

347
compile
View File

@ -1,347 +0,0 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
scriptversion=2012-10-14.11; # UTC
# Copyright (C) 1999-2014 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# This file is maintained in Automake, please report
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
nl='
'
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent tools from complaining about whitespace usage.
IFS=" "" $nl"
file_conv=
# func_file_conv build_file lazy
# Convert a $build file to $host form and store it in $file
# Currently only supports Windows hosts. If the determined conversion
# type is listed in (the comma separated) LAZY, no conversion will
# take place.
func_file_conv ()
{
file=$1
case $file in
/ | /[!/]*) # absolute file, and not a UNC file
if test -z "$file_conv"; then
# lazily determine how to convert abs files
case `uname -s` in
MINGW*)
file_conv=mingw
;;
CYGWIN*)
file_conv=cygwin
;;
*)
file_conv=wine
;;
esac
fi
case $file_conv/,$2, in
*,$file_conv,*)
;;
mingw/*)
file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
;;
cygwin/*)
file=`cygpath -m "$file" || echo "$file"`
;;
wine/*)
file=`winepath -w "$file" || echo "$file"`
;;
esac
;;
esac
}
# func_cl_dashL linkdir
# Make cl look for libraries in LINKDIR
func_cl_dashL ()
{
func_file_conv "$1"
if test -z "$lib_path"; then
lib_path=$file
else
lib_path="$lib_path;$file"
fi
linker_opts="$linker_opts -LIBPATH:$file"
}
# func_cl_dashl library
# Do a library search-path lookup for cl
func_cl_dashl ()
{
lib=$1
found=no
save_IFS=$IFS
IFS=';'
for dir in $lib_path $LIB
do
IFS=$save_IFS
if $shared && test -f "$dir/$lib.dll.lib"; then
found=yes
lib=$dir/$lib.dll.lib
break
fi
if test -f "$dir/$lib.lib"; then
found=yes
lib=$dir/$lib.lib
break
fi
if test -f "$dir/lib$lib.a"; then
found=yes
lib=$dir/lib$lib.a
break
fi
done
IFS=$save_IFS
if test "$found" != yes; then
lib=$lib.lib
fi
}
# func_cl_wrapper cl arg...
# Adjust compile command to suit cl
func_cl_wrapper ()
{
# Assume a capable shell
lib_path=
shared=:
linker_opts=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
*.o | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
;;
*)
func_file_conv "$2"
set x "$@" -Fe"$file"
shift
;;
esac
;;
-I)
eat=1
func_file_conv "$2" mingw
set x "$@" -I"$file"
shift
;;
-I*)
func_file_conv "${1#-I}" mingw
set x "$@" -I"$file"
shift
;;
-l)
eat=1
func_cl_dashl "$2"
set x "$@" "$lib"
shift
;;
-l*)
func_cl_dashl "${1#-l}"
set x "$@" "$lib"
shift
;;
-L)
eat=1
func_cl_dashL "$2"
;;
-L*)
func_cl_dashL "${1#-L}"
;;
-static)
shared=false
;;
-Wl,*)
arg=${1#-Wl,}
save_ifs="$IFS"; IFS=','
for flag in $arg; do
IFS="$save_ifs"
linker_opts="$linker_opts $flag"
done
IFS="$save_ifs"
;;
-Xlinker)
eat=1
linker_opts="$linker_opts $2"
;;
-*)
set x "$@" "$1"
shift
;;
*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
func_file_conv "$1"
set x "$@" -Tp"$file"
shift
;;
*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
func_file_conv "$1" mingw
set x "$@" "$file"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -n "$linker_opts"; then
linker_opts="-link$linker_opts"
fi
exec "$@" $linker_opts
exit 1
}
eat=
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
Wrapper for compilers which do not understand '-c -o'.
Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "compile $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
ofile=
cfile=
for arg
do
if test -n "$eat"; then
eat=
else
case $1 in
-o)
# configure might choose to run compile as 'compile cc -o foo foo.c'.
# So we strip '-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
ofile=$2
;;
*)
set x "$@" -o "$2"
shift
;;
esac
;;
*.c)
cfile=$1
set x "$@" "$1"
shift
;;
*)
set x "$@" "$1"
shift
;;
esac
fi
shift
done
if test -z "$ofile" || test -z "$cfile"; then
# If no '-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
# '.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
# Name of file we expect compiler to create.
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
# Note: use '[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
while true; do
if mkdir "$lockdir" >/dev/null 2>&1; then
break
fi
sleep 1
done
# FIXME: race condition here if user kills between mkdir and trap.
trap "rmdir '$lockdir'; exit 1" 1 2 15
# Run the compile.
"$@"
ret=$?
if test -f "$cofile"; then
test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
elif test -f "${cofile}bj"; then
test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
fi
rmdir "$lockdir"
exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

View File

@ -1,104 +0,0 @@
/* config.h.in. Generated from configure.ac by autoheader. */
/* 1 if FreeBSD ciss driver ioctl header file present */
#undef HAVE_CISSIO_H
/* Define to 1 if you have the <errno.h> header file. */
#undef HAVE_ERRNO_H
/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
/* 1 if Linux cciss driver ioctl header file present */
#undef HAVE_LINUX_CCISS_IOCTL_H
/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
to 0 otherwise. */
#undef HAVE_MALLOC
/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
/* Define to 1 if you have the `memset' function. */
#undef HAVE_MEMSET
/* Define to 1 if you have the <netinet/in.h> header file. */
#undef HAVE_NETINET_IN_H
/* 1 if Linux SCSI header file present */
#undef HAVE_SCSI_SCSI_H
/* 1 if Linux SCSI Generic header file present */
#undef HAVE_SCSI_SG_H
/* Define to 1 if stdbool.h conforms to C99. */
#undef HAVE_STDBOOL_H
/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
/* Define to 1 if you have the `strerror' function. */
#undef HAVE_STRERROR
/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
/* Define to 1 if you have the `strstr' function. */
#undef HAVE_STRSTR
/* Define to 1 if you have the <sys/ioctl.h> header file. */
#undef HAVE_SYS_IOCTL_H
/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
/* Define to 1 if the system has the type `_Bool'. */
#undef HAVE__BOOL
/* Name of package */
#undef PACKAGE
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
/* Define to the full name of this package. */
#undef PACKAGE_NAME
/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
/* Define to the home page for this package. */
#undef PACKAGE_URL
/* Define to the version of this package. */
#undef PACKAGE_VERSION
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
/* Version number of package */
#undef VERSION
/* Define to empty if `const' does not conform to ANSI C. */
#undef const
/* Define to rpl_malloc if the replacement function should be used. */
#undef malloc

6065
configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,35 +0,0 @@
# -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.
AC_PREREQ(2.59)
AC_INIT(cciss_vol_status, 1.12, esc.storagedev@microsemi.com)
AC_CONFIG_SRCDIR([cciss_vol_status.c])
AC_CONFIG_HEADER([config.h])
AM_INIT_AUTOMAKE()
# Checks for programs.
AC_PROG_CC
# Checks for libraries.
# Checks for header files.
AC_HEADER_STDC
AC_HEADER_STDBOOL
AC_CHECK_HEADERS([errno.h fcntl.h inttypes.h netinet/in.h stdlib.h string.h sys/ioctl.h unistd.h])
AC_CHECK_HEADER(scsi/sg.h, AC_DEFINE([HAVE_SCSI_SG_H], 1, [1 if Linux SCSI Generic header file present]), AC_MSG_WARN([scsi/sg.h not found so MSA1000 support will not be compiled.]))
AC_CHECK_HEADER(scsi/scsi.h, AC_DEFINE([HAVE_SCSI_SCSI_H], 1, [1 if Linux SCSI header file present]))
AC_CHECK_HEADER(linux/cciss_ioctl.h, AC_DEFINE([HAVE_LINUX_CCISS_IOCTL_H], 1, [1 if Linux cciss driver ioctl header file present]))
AC_CHECK_HEADER(/usr/src/sys/dev/ciss/cissio.h, AC_DEFINE([HAVE_CISSIO_H], 1, [1 if FreeBSD ciss driver ioctl header file present]))
# Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
# Checks for library functions.
AC_PROG_GCC_TRADITIONAL
AC_FUNC_MALLOC
AC_CHECK_FUNC(getopt)
AC_CHECK_FUNC(getopt_long)
AC_CHECK_FUNCS([memset strerror strstr])
AC_CONFIG_FILES([Makefile])
AC_OUTPUT

6
debian/NEWS vendored
View File

@ -1,6 +0,0 @@
cciss-vol-status (1:1.09-2hwraid1) unstable; urgency=low
* Starting from this release cciss-vol-status has been renamed to
cciss_vol_status to match upstream and Debian's name.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Tue, 31 Jan 2012 14:37:03 +0100

27
debian/README.Debian vendored
View File

@ -1,27 +0,0 @@
README.Debian for cciss-vol-status package
------------------------------------------
Possible configuration:
----------------------
If you want to change the default configuration of the init script you
can create the file /etc/default/cciss-vol-statusd and specify the following
values.
MAILTO=
PERIOD=
REMIND=
ID=
Use MAILTO to specify which user shall get the status mails
(default is root).
With PERIOD you can fix the seconds between each check.
And REMIND specifies the seconds between each reminder.
ID is set as default to /dev/cciss/c0d0 which should fit most of setups.
However you need to change it to support multiple cards.
Look at the cciss-vol-status(8) manpage for more information.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Wed, 20 Aug 2008 12:38:00 +0200

View File

@ -1,193 +0,0 @@
#! /bin/sh
# Author: Petter Reinholdtsen <pere@hungry.com>
# Author: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
# License: GNU General Public License v2 or later
#
### BEGIN INIT INFO
# Provides: cciss-vol-statusd
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Check cciss_vol_status values in the background.
### END INIT INFO
PATH=/sbin:/bin:/usr/sbin:/usr/bin
DESC="cciss-vol-status monitor"
NAME="cciss-vol-statusd"
PIDFILE=/var/run/$NAME.pid
STATUSFILE=/var/run/$NAME.status
SCRIPTNAME=/etc/init.d/$NAME
# Do not touch you can configure this in /etc/default/cciss-vol-statusd
MAILTO=root # Where to report problems
PERIOD=600 # Seconds between each check (default 10 minutes)
REMIND=7200 # Seconds between each reminder (default 2 hours)
RUN_DAEMON=yes
ID=/dev/cciss/c0d0
[ -e /etc/default/cciss-vol-statusd ] && . /etc/default/cciss-vol-statusd
# Gracefully exit if the package has been removed.
test -x /usr/sbin/cciss_vol_status || exit 0
. /lib/lsb/init-functions
[ -e /etc/default/rcS ] && . /etc/default/rcS
if [ $RUN_DAEMON = "no" ] ; then
log_begin_msg "cciss-vol-statusd is disabled in /etc/default/cciss-vol-statusd, not starting."
log_end_msg 0
exit 0
fi
check_cciss() {
echo $$ > $PIDFILE.new && mv $PIDFILE.new $PIDFILE
while true ; do
# Check ever $PERIOD seconds, send email on every status
# change and repeat ever $REMIND seconds if the raid is still
# bad.
if (cciss_vol_status $ID); then
BADRAID=false
else
BADRAID=true
logger -t cciss-vol-statusd "detected non-optimal RAID status"
fi
STATUSCHANGE=false
if [ true = "$BADRAID" ] ; then
# RAID not OK
(cciss_vol_status $ID) > $STATUSFILE.new
if [ ! -f $STATUSFILE ] ; then # RAID just became broken
STATUSCHANGE=true
mv $STATUSFILE.new $STATUSFILE
elif cmp -s $STATUSFILE $STATUSFILE.new ; then
# No change. Should we send reminder?
LASTTIME="`stat -c '%Z' $STATUSFILE`"
NOW="`date +%s`"
SINCELAST="`expr $NOW - $LASTTIME`"
if [ $REMIND -le "$SINCELAST" ]; then
# Time to send reminder
STATUSCHANGE=true
mv $STATUSFILE.new $STATUSFILE
else
rm $STATUSFILE.new
fi
else
STATUSCHANGE=true
mv $STATUSFILE.new $STATUSFILE
fi
else
# RAID OK
if [ -f $STATUSFILE ] ; then
rm $STATUSFILE
STATUSCHANGE=true
fi
fi
if [ true = "$STATUSCHANGE" ]; then
hostname="`uname -n`"
(
cat <<EOF
This is a RAID status update from cciss-vol-statusd. The cciss_vol_status
program reports that one of the RAIDs changed state:
EOF
if [ -f $STATUSFILE ] ; then
cat $STATUSFILE
else
(cciss_vol_status $ID)
fi
echo
echo "Report from $0 on $hostname"
) | mail -s "info: CCISS raid status change on $hostname" $MAILTO
fi
sleep $PERIOD
done
}
check_daemon() {
# Let's check if there is a daemon which is really running and not timing out
DAEMON_RUN=`ps aux | grep "/etc/init.d/cciss-vol-statusd check_cciss" | grep -v grep | grep -v daemon`
if [ -n "$DAEMON_RUN" ] ; then
return 1;
else
return 0;
fi
}
#
# Function that starts the daemon/service.
#
d_start() {
[ -f $PIDFILE ] && PID="`cat $PIDFILE`"
if [ "$PID" ] ; then
log_progress_msg "Daemon already running. Refusing to start another"
return 0
elif check_daemon ; then
# Use the daemon package to turn this script into a daemon
start-stop-daemon --start --quiet --pidfile $PIDFILE \
--oknodo --exec /usr/bin/daemon /usr/bin/daemon $SCRIPTNAME check_cciss
return 0
else
log_progress_msg "Daemon is already running. Refusing to start another"
return 0
fi
}
#
# Function that stops the daemon/service.
#
d_stop() {
if [ -f $PIDFILE ] ; then
start-stop-daemon --stop --oknodo --quiet --pidfile $PIDFILE > /dev/null 2>&1
rm -f $PIDFILE
else
log_progress_msg "Daemon is already stopped."
return 0
fi
}
# This is a workaround function which does not directly exit and
# therefore can be used by a restart
d_stop_by_restart() {
if [ -f $PIDFILE ] ; then
start-stop-daemon --oknodo --stop --quiet --pidfile $PIDFILE
rm -f $PIDFILE
log_end_msg 0
else
log_progress_msg "Daemon is already stopped."
log_end_msg 0
fi
}
case "$1" in
start)
echo -n ""
log_begin_msg "Starting $DESC: $NAME"
d_start ; CODE=$?
log_end_msg $CODE
;;
stop)
log_begin_msg "Stopping $DESC: $NAME"
d_stop ; CODE=$?
log_end_msg $CODE
;;
check_cciss)
check_cciss
;;
restart|force-reload)
log_begin_msg "Restarting $DESC: $NAME"
d_stop_by_restart
sleep 1
d_start || CODE=$?
log_end_msg $CODE
;;
*)
# echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0

View File

@ -1 +0,0 @@
debian/cron.daily-example

67
debian/changelog vendored
View File

@ -1,67 +0,0 @@
cciss-vol-status (1:1.12-1gohwraid1) UNRELEASED; urgency=medium
* bump to new version
-- Mario Fetka <mario.fetka@gmail.com> Sat, 11 Nov 2017 18:23:49 +0100
cciss-vol-status (1:1.10-1hwraid1) unstable; urgency=low
* New upstream release.
* Drop allow_short_persnickety_option patch.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Tue, 05 Feb 2013 16:55:37 +0100
cciss-vol-status (1:1.09-2hwraid1) unstable; urgency=low
* Brand new package based on 1.09-2 debian's one.
* Fully backported to debhelper 5 to keep old releases compatibility.
* Improved init script by importing fixes from mpt-status 1.2.0-7 package.
* Add an epoch to be sure it will be installed over debian's official
package (Closes: #90).
* Binary renamed from cciss-vol-status to cciss_vol_status to match
upstream's and Debian's name (Add debian/NEWS).
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Tue, 31 Jan 2012 14:31:50 +0100
cciss-vol-status (1.09-2) unstable; urgency=low
* Switched to minimal rules file, to fix lintian warning
debian-rules-missing-recommended-target.
* Reformatted debian/copyright. Also fixes lintian pedantic check
copyright-refers-to-symlink-license.
* Add patch so the short form of the --persnickety is accepted.
-- Christian Hofstaedtler <christian@hofstaedtler.name> Mon, 29 Aug 2011 01:23:05 +0200
cciss-vol-status (1.09-1) unstable; urgency=low
* New Upstream release 1.09
* Drop patch fix-strnlen-missing-arg, fixed upstream
* Bump Standards-Version to 3.9.2
* Rebuild autotools build system on build, so we don't Depend: on obsolete
automake1.10
* Add cron.daily example (Closes: #597573)
* Set VCS Fields in debian/control
* Update Package description
* Remove empty /usr/sbin directory
* fix example installation
* Do not install useless README
* Update Maintainer email address
-- Christian Hofstaedtler <christian@hofstaedtler.name> Thu, 02 Jun 2011 18:09:06 +0200
cciss-vol-status (1.06-1) unstable; urgency=low
* New upstream release (Closes: #568415)
* Switch to dpkg-source 3.0 (quilt) format
* Bump Standards-Version to 3.8.3
* Fix lintian warnings by adding ${misc:Depends}
-- Christian Hofstaedtler <ch+debian-packages@zeha.at> Thu, 04 Feb 2010 18:39:28 +0000
cciss-vol-status (1.03-1) unstable; urgency=low
* Initial release (Closes: #496788)
-- Christian Hofstaedtler <ch+debian-packages@zeha.at> Wed, 27 Aug 2008 17:52:21 +0200

1
debian/compat vendored
View File

@ -1 +0,0 @@
7

21
debian/control vendored
View File

@ -1,21 +0,0 @@
Source: cciss-vol-status
Section: admin
Priority: extra
Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
Build-Depends: debhelper (>= 5), autotools-dev, quilt
Standards-Version: 3.9.2
Homepage: http://cciss.sourceforge.net/
Vcs-Browser: http://github.com/zeha/cciss-vol-status/
Vcs-Git: git://github.com/zeha/cciss-vol-status.git
DM-Upload-Allowed: yes
Package: cciss-vol-status
Architecture: amd64 i386
Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base, daemon, bsd-mailx | mailx
Description: HP SmartArray RAID Volume Status Checker
A RAID monitor for HP SmartArray Controllers, as supported by the "cciss",
"hpsa", "hpahcisr" kernel drivers.
It will check for problems on your configured logical drives, without relying
on the controller's event log.
.
It also supports MSA500 and MSA1000 controllers.

41
debian/copyright vendored
View File

@ -1,41 +0,0 @@
This work was packaged for Debian by:
Christian Hofstaedtler <christian@hofstaedtler.name> on Wed, 27 Aug 2008 17:52:21 +0200
It was downloaded from:
http://cciss.sourceforge.net/
Upstream Author:
Stephen M. Cameron <smcameron@users.sourceforge.net>
Copyright:
Copyright (C) 2006,2007 Hewlett-Packard Development Company, L.P.
License:
cciss_vol_status is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
cciss_vol_status is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with cciss_vol_status; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
On Debian systems, the complete text of the GNU General
Public License version 2 can be found in `/usr/share/common-licenses/GPL-2'.
The Debian packaging is:
Copyright 2008,2009,2010,2011 Christian Hofstaedtler <christian@hofstaedtler.name>
and is licensed under the GPL version 2 or (at your option) any later version,
see above.

View File

@ -1,29 +0,0 @@
#!/bin/sh
# This is an example cron.daily file, which one could use to do a cheap
# daily check of the RAID arrays. You might be better off setting up a
# proper monitoring system though.
test -x /usr/bin/cciss_vol_status || exit 0
STATUS=0
if [ -d /proc/driver/cciss ]; then
DEVS=`grep -h 'cciss/c.*d0:' /proc/driver/cciss/cciss* |awk -F: '{print "/dev/" $1}'`
OUTPUT=`/usr/bin/cciss_vol_status $DEVS`
if [ $? -ne 0 ]; then
printf "%s\n" "$OUTPUT"
exit 1
fi
fi
# FIXME: This cronjob should also look at the scsi generic nodes
# (/dev/sg*?) to cover the hpsa driver, fibre-attached MSA1000 family
# devices, or the hpahcisr software RAID driver (see cciss_vol_status(8)
# about how to choose the correct nodes -- i don't use these other
# devices, so I cannot verify how to check them cleanly)
#
# -- Daniel Kahn Gillmor <dkg@fifthhorseman.net>
# Mon, 20 Sep 2010 18:12:31 -0400
exit 0

View File

@ -1,68 +0,0 @@
Description: man does not understand LD macro
Author: Christian Hofstaedtler <ch+debian-packages@zeha.at>
Forwarded: no
Last-Update: 2010-02-04
Index: cciss-vol-status-1.06/cciss_vol_status.8
===================================================================
--- cciss-vol-status-1.06.orig/cciss_vol_status.8 2010-02-04 19:13:34.302683423 +0000
+++ cciss-vol-status-1.06/cciss_vol_status.8 2010-02-04 19:14:40.797930573 +0000
@@ -101,7 +101,7 @@
/dev/sg node to use with cciss_vol_status:
.PP
.nf
-.LD
+.PP
wumpus:/home/scameron # ls -l /sys/class/scsi_generic/*
lrwxrwxrwx 1 root root 0 2009-11-18 12:31 /sys/class/scsi_generic/sg0 -> ../../devices/pci0000:00/0000:00:02.0/0000:02:00.0/0000:03:03.0/host0/target0:0:0/0:0:0:0/scsi_generic/sg0
lrwxrwxrwx 1 root root 0 2009-11-18 12:31 /sys/class/scsi_generic/sg1 -> ../../devices/pci0000:00/0000:00:1f.1/host2/target2:0:0/2:0:0:0/scsi_generic/sg1
@@ -128,7 +128,7 @@
which corresponds to the HP P800 RAID controller listed in /proc/scsi/scsi.
.SH EXAMPLE
.nf
-.LD
+.PP
[root@somehost]# cciss_vol_status -q /dev/cciss/c*d0
/dev/cciss/c0d0: (Smart Array P800) RAID 0 Volume 0 status: OK.
/dev/cciss/c0d0: (Smart Array P800) RAID 0 Volume 1 status: OK.
@@ -206,7 +206,7 @@
drive status:
.PP
.nf
-.LD
+.PP
"At least one spare drive designated"
"At least one spare drive activated and currently rebuilding"
"At least one activated on-line spare drive is completely rebuilt on this logical drive"
@@ -220,7 +220,7 @@
physical drives, if more than zero, will be reported as:
.TP
.nf
-.LD
+.PP
"Total of n failed physical drives detected on this logical drive."
.DE
.fi
@@ -231,7 +231,7 @@
power supplies, and temperature are reported as follows:
.PP
.nf
-.LD
+.PP
"Fan failed"
"Temperature problem"
"Door alert"
@@ -265,7 +265,7 @@
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
.SH "SEE ALSO"
http://cciss.sourceforge.net
-.SH note 1
+.SH NOTE 1
The /dev/cciss/c*d0 device nodes of the cciss driver do double duty.
They serve as an access point to both the RAID controllers, and to the
first logical drive of each RAID controller. Notice that a /dev/cciss/c*d0
@@ -277,4 +277,3 @@
were statically allocated at compile time, and were in short supply.
Changing this behavior at this point would break lots of userland
programs.
-.FE

View File

@ -1 +0,0 @@
fix-manpage

79
debian/rules vendored
View File

@ -1,79 +0,0 @@
#!/usr/bin/make -f
# Quilt patch system
include /usr/share/quilt/quilt.make
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# These are used for cross-compiling and for saving the configure script
# from having to guess our platform (since we know it already)
DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE))
CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
else
CROSS= --build $(DEB_BUILD_GNU_TYPE)
endif
DESTDIR=$(CURDIR)/debian/cciss-vol-status
configure: patch
config.status: configure
dh_testdir
ifneq "$(wildcard /usr/share/misc/config.sub)" ""
cp -f /usr/share/misc/config.sub config.sub
endif
ifneq "$(wildcard /usr/share/misc/config.guess)" ""
cp -f /usr/share/misc/config.guess config.guess
endif
./configure $(CROSS) \
--prefix=/usr \
--bindir=/usr/sbin \
--mandir=/usr/share/man \
CFLAGS="$(CFLAGS)" \
LDFLAGS="-Wl,-z,defs"
build: build-arch build-indep
build-indep:
build-arch: config.status
dh_testdir
$(MAKE)
touch $@
clean: unpatch
dh_testdir
dh_testroot
rm -f build-arch
[ ! -f Makefile ] || $(MAKE) distclean
rm -f config.sub config.guess config.log
dh_clean
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
$(MAKE) DESTDIR=$(DESTDIR) install
binary-indep: build install
binary-arch: build install
dh_testdir
dh_testroot
dh_installchangelogs ChangeLog
dh_installdocs
dh_installman
dh_installinit --name=cciss-vol-statusd
dh_link
dh_strip
dh_compress
dh_fixperms
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install

View File

@ -1 +0,0 @@
1.0

9
debian/watch vendored
View File

@ -1,9 +0,0 @@
# See uscan(1) for format
# Compulsory line, this is a version 3 file
version=3
# Uncomment to find new files on sourceforge, for debscripts >= 2.9
http://sf.net/cciss/cciss_vol_status-(.*)\.tar\.gz

479
depcomp
View File

@ -1,479 +0,0 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
' ' ' >> $depfile
echo >> $depfile
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> $depfile
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
tmpdepfile="$stripped.u"
if test "$libtool" = yes; then
"$@" -Wc,-M
else
"$@" -M
fi
stat=$?
if test -f "$tmpdepfile"; then :
else
stripped=`echo "$stripped" | sed 's,^.*/,,'`
tmpdepfile="$stripped.u"
fi
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
if test -f "$tmpdepfile"; then
outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# "include basename.Plo" scheme.
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
icc)
# Intel's C compiler understands `-MD -MF file'. However on
# icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
# ICC 7.0 will fill foo.d with something like
# foo.o: sub/foo.c
# foo.o: sub/foo.h
# which is wrong. We want:
# sub/foo.o: sub/foo.c
# sub/foo.o: sub/foo.h
# sub/foo.c:
# sub/foo.h:
# ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in `foo.d' instead, so we check for that too.
# Subdirectories are respected.
dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
test "x$dir" = "x$object" && dir=
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1="$dir.libs/$base.lo.d"
tmpdepfile2="$dir.libs/$base.d"
"$@" -Wc,-MD
else
tmpdepfile1="$dir$base.o.d"
tmpdepfile2="$dir$base.d"
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
if test -f "$tmpdepfile1"; then
tmpdepfile="$tmpdepfile1"
else
tmpdepfile="$tmpdepfile2"
fi
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no
for arg in "$@"; do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix="`echo $object | sed 's/^.*\././'`"
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test $1 != '--mode=compile'; do
shift
done
shift
fi
# Remove `-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o,
# because we must use -o when running libtool.
"$@" || exit $?
IFS=" "
for arg
do
case "$arg" in
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
. "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0

View File

@ -1,251 +0,0 @@
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0

265
missing
View File

@ -1,265 +0,0 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.3 - GNU automake"
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
aclocal)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acinclude.m4' or \`configure.in'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`configure.in'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`acconfig.h' or \`configure.in'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex|flex)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
fi
if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit 1
fi
;;
makeinfo)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
fi
touch $file
;;
tar)
shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar ${1+"$@"} && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar ${1+"$@"} && exit 0
fi
firstarg="$1"
if shift; then
case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" ${1+"$@"} && exit 0
;;
esac
case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" ${1+"$@"} && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequirements for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0