Compare commits

...

No commits in common. "master" and "pristine-tar" have entirely different histories.

21 changed files with 2 additions and 1670 deletions

View File

@ -1,854 +0,0 @@
*********************************************
LSI Corp. MegaRAID MegaCLI Release
*********************************************
Release Date: 01/20/14
========================
Supported Controllers
==================
MegaRAID SAS 9270-8i
MegaRAID SAS 9271-4i
MegaRAID SAS 9271-8i
MegaRAID SAS 9271-8iCC
MegaRAID SAS 9286-8e
MegaRAID SAS 9286CV-8e
MegaRAID SAS 9286CV-8eCC
MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9285CV-8e
MegaRAID SAS 8704ELP
MegaRAID SAS 8704EM2
MegaRAID SAS 8708ELP
MegaRAID SAS 8708EM2
MegaRAID SAS 8880EM2
MegaRAID SAS 8888ELP
MegaRAID SAS 8308ELP*
MegaRAID SAS 8344ELP*
MegaRAID SAS 84016E*
MegaRAID SAS 8408E*
MegaRAID SAS 8480E*
MegaRAID SATA 300-8ELP*
*These older controllers should work but have not been tested.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 01/20/14
Version Numbers: MegaCLI
=============== ===========
Current Version 8.07.14
Previous Version 8.07.07
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
Windows
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
SCGCQ00393585 (DFCT) - VD creation from MegaCli fails on Solaris Sparc 10u9 operating system.
SCGCQ00413883 (DFCT) - "megacli -version -pd -a0" Segmentation Faults if PDs are missing
SCGCQ00445356 (CSET) - Megacli crashes after invoking any command in SGI system with one 9280-8e and 2 quad port qlogic FC cards.
SCGCQ00452383 (CSET) - New version MegaCli did not show iBBU06 over temperature as old when temperature is high
SCGCQ00454980 (CSET) - storcli /c0 show is not listinf SWR controller
SCGCQ00459022 (DFCT) - System crashes when tried to issue command exceeding around 90- 100 characters in EFI Environment.
SCGCQ00470761 (DFCT) - Megacli wrongly reports PCI bus number for 2208 based controllers.
SCGCQ00471745 (DFCT) - Same NVRAM log event IDs with different messages
SCGCQ00475159 (DFCT) - While printing the ldinfo, there are some tabs instead of spaces for indentation so replaced all tabs with spaces.
SCGCQ00531245 (ENHREQ) - Display the NCQ enabled/disabled status of every SATA disk drive in output of StorCLI and MegaCLI
SCGCQ00552754 (ENHREQ) - RAID CLI to display the Patrol Read Start Time
SCGCQ00564123 (ENHREQ) - LIBMODS : Request RAID CLI to display the Patrol Read Start Time
SCGCQ00521386 (DFCT) - Megacli : ADRA is still mentioned in help file, eventhough it is not supported
SCGCQ00572235 (DFCT) - No description for "setdelay" with help file of adppr.
SCGCQ00572270 (DFCT) - adpallinfo is not showing information regarding "NCQ"
SCGCQ00573053 (DFCT) - ncq settings for sata pd is showing disabled
SCGCQ00573091 (DFCT) - NCQ setting for SATA pd is showing disabled with TB fW.
SCGCQ00576028 (DFCT) - No description for "setdelay" with help file of adppr.
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
=====================================
=====================================
Previous Releases:
=====================================
=====================================
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 03/02/13
Version Numbers: MegaCLI
=============== ===========
Current Version 8.07.07
Previous Version 8.07.06
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS (version 8.07.06)
FreeBSD
Linux
Solaris
VMware
VMwareMN
Windows
EFI (version 8.07.06)
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
SCGCQ00332212 (DFCT) - libsysfs custom implementation issue.
SCGCQ00345839 (DFCT) - While the BBU is fully charged, megacli adpbbucmd reports that it is both discharging and not discharging
SCGCQ00355536 (DFCT) - MegaCli and StorCli can not manage both controllers of different types n the same system under FreeBSD
SCGCQ00362808 (DFCT) - MegaCli 32 Crashes in Windows in specific system
SCGCQ00364411 (DFCT) - Segmentation Fault while running discard preserved cache in megacli
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 12/28/12
Version Numbers: MegaCLI
=============== ===========
Current Version 8.07.06
Previous Version 8.05.06
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
VMware
Windows
EFI
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
SCGCQ00289583 Defect CLI CfgLDAdd reports invalid token when -Force and -enblPI are used together
SCGCQ00289585 Defect Command line generated along with press any key in help file operation
SCGCQ00315805 Defect Change the UI fro "adpBBucmd getbbumodes a0" command
SCGCQ00317547 Defect MegaCLI misspell the word "transparent" in bbu mode display
SCGCQ00318648 Defect VD creation on regular drives fails for older firmware where 4K sector is not supported
SCGCQ00319423 Defect FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded
SCGCQ00324031 Defect MegaCLI 8.04.07 output typos
SCGCQ00324525 Defect MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log.
SCGCQ00325890 Defect CLI/Segmentation fault while running pdlist and cfgdsply in CentOS
SCGCQ00326673 Defect 5.5 CLI Version 8.07.00/Unable to flash the controller's FW using CLI
SCGCQ00327929 Defect Command to enable Patrol Read on SSDs controller property is not shown in Help
SCGCQ00331576 Defect LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies
SCGCQ00333070 Defect make files updates
SCGCQ00333590 Defect MegaCLI 8.04.07 output typos
SCGCQ00336434 Defect MegaCli reports wrong properties for VD.
SCGCQ00337213 Defect FW reports exit code 0x3d (Unsupported HWR) when getting bbu capacity info for Supercap
SCGCQ00337810 Defect 37 drives shown as unconfigured good in MegaCLI when "enable JBOD=0"
SCGCQ00339405 Defect MegaCLI does not display correct adpBIOS mode using "adpBIOS dsply" command
SCGCQ00341724 Defect FW allows a firmware to be flashed through Online FW Update method in DOS and then breaks into montask
SCGCQ00342848 Defect Add Adapter restart support in CLI
SCGCQ00342993 Defect Add Adapter restart support in CLI
SCGCQ00343308 Defect MegaCLI online help display for "adpBIOS" is not align correctly
SCGCQ00343310 Defect MegaCLI "adpBIOS dsply" command does not display correct information when set to BE or SOE
SCGCQ00344574 Defect MegaCLI does not prompt user to reboot after update firmware
SCGCQ00352210 Defect MegaCli pdFwDownload fails on a SATA drive with an interposer
SCGCQ00353584 Defect CLI has to refresh the MR_CTRL_INFO after the MR_DCMD_CTRL_FLASH_FW_DOWNLOAD for OFU.
SCGCQ00356037 Defect CLI Crashes When Running ADP FW Flash Command
SCGCQ00356190 Defect No controller properties for Online FW Update in MegaCLi
SCGCQ00318641 EnhancementRequest True Online Firmware Update
SCGCQ00322216 EnhancementRequest Help files for Perfmode in adp(set/get)prop are added.
SCGCQ00322234 EnhancementRequest Utilities to show logical block size [AF512e, 512n, 4Kn,..]
SCGCQ00322257 EnhancementRequest Implemented support for 4K sector drives in CLI.
SCGCQ00322317 EnhancementRequest 4k sector support in LIBMODS
SCGCQ00334377 EnhancementRequest Resurrect ARA option in CLI
SCGCQ00338696 EnhancementRequest powershell support for MegaCli
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 10/08/12
Version Numbers: MegaCLI
=============== ===========
Current Version 8.05.06
Previous Version 8.04.07
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
VMware
Windows
EFI
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
LSIP200233163 (DFCT) improve the manner and customer experience of transitioning from MR mode to iMR
LSIP200233100 (DFCT) MR5.4 MegaCli - does not recognize the adapter
LSIP200233107 (DFCT) Error message displayed while creating VD in SLESS 11 SP2
LSIP200245985 (DFCT) Load address change for PCLI
LSIP200233342 (DFCT) Error message displayed while deleting all ld's in MegaCLI, SLESS11 sp2
LSIP200232922 (DFCT) MegaCLI misspell the word "package" as "pakage" under ctrl version and it does not displays firmware version
LSIP200232921 (DFCT) MegaCLI displays version for PD in unclear format and the data is not aligned correctly
LSIP200232954 (DFCT) Need to Support all the MFC default values in the command AdpSettings.
LSIP200245968 (DFCT) In EFICLI not able to flash latest firmware to controller without using -nosigchk -noverchk option.
LSIP200233079 (DFCT) Redesign battery changes
LSIP200232955 (DFCT) Porting CLI MR5.3 defect (LSIP200232645)
LSIP200233047 (DFCT) Throwing exception while erasing VD with user given patterns
LSIP200245889 (DFCT) Battery Changes
LSIP200232929 (DFCT) LSIP200211349 (PR NO)- MegaCLI for uEFI
LSIP200233314 (DFCT) Pcilinkspeedset and adpdowngrade cmds are not working and Need to update Help page
LSIP200232870 (DFCT) Add a Gen2 to Gen3 toggle function and a check for the PCI speed to MegaSCU/CLI [ PR : LSIP200231423 ]
LSIP200232927 (DFCT) Port PR 198414 to MR5.4 (Headless Boot) to TB [ PR: LSIP200229508]
LSIP200232044 (DFCT) MegaCli causes "unexpected sense" and "illegal request" on HDDs
LSIP200233041 (DFCT) MegaCli -ShowSummary display incorrect LD info
LSIP200232675 (DFCT) (RP LSIP200232646) "Disk Cache Policy" default setting is set to "Unchanged" needs to be set to "Disabled"
LSIP200232713 (DFCT) CLI is displaying the message to Use Force option when using cfglddel to try to delete a CC VD.
LSIP200232645 (DFCT) Cannot clear a CC Drive Group using MegaCli64.exe in Windows
LSIP200246111 (DFCT) Megacli tool stops working while executing adpeventlog commands.
LSIP200246081 (DFCT) Any junk character after the help command executes with an incomplete output and exits with no error.
LSIP200246117 (DFCT) Output correction required for BBU status.
LSIP200246078 (DFCT) Enclosure information not displayed.
SCGCQ00317021 (DFCT) MegaCLI ldinfo does not display correct information under FreeBSD
SCGCQ00317547 (DFCT) MegaCLI misspell the word "transparent" in bbu mode display
SCGCQ00319423 (DFCT) FreeBSD MegaCLI v8.05.02 does not detect controller when driver 5.504.05.00 is loaded
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 06/18/12
Version Numbers: MegaCLI
=============== ===========
Current Version 8.04.07
Previous Version 8.02.21
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
VMware
Windows
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
LSIP200223580 (CO) EfiHostCli.efi should be able to save raid configuration to a file, similar to MegaCli
LSIP200210362 (CO) Update CacheCade product names in all utilities and user manuals
LSIP200212698 (CO) MR: MegaCLI should warn user that they should reboot immediately after flashing
LSIP200212693 (CO) Real Time Scheduler for Relearn
LSIP200199668 (CO) End to End Data Protection (EEDP)
LSIP200210405 (CO) Enable copy back on SMART - TB
LSIP200209945 (CO) Generally available support of selected battery modes for iBBU08.
LSIP200230177 (DFCT) battery operational status is not proper
LSIP200231521 (DFCT) forward porting of defect id:LSIP200230223 and LSIP200230629
LSIP200232675 (DFCT) (RP LSIP200232646) "Disk Cache Policy" default setting is set to "Unchanged" needs to be set to "Disabled"
LSIP200223837 (DFCT) Time/Date stamp does not match with the respective CDB's displayed in Drive Performance Monitor(DPM) command.
LSIP200230994 (DFCT) (Defer LSIP200230558) CLI/Emergency hotspare status is being displayed for UG drives when UG for Emergency is disabled
LSIP200231392 (DFCT) FW broke at MonTask: line 278 in file ../../raid/1078int.c while running EFI CLI "adpallinfo -a0 page"
LSIP200232089 (DFCT) Uefi cli help does not show commad adpget/set patrolread rate in help file which is supported on SWR controller.
LSIP200232282 (DFCT) 512E drive Support Changes is ported from MR 5.2 to MR 5.3
LSIP200232497 (DFCT) Discard Cache command should remove the blocked access on an Virtual Drive
LSIP200232713 (DFCT) CLI is displaying the message to Use Force option when using cfglddel to try to delete a CC VD.
LSIP200232645 (DFCT) Cannot clear a CC Drive Group using MegaCli64.exe in Windows
LSIP200230035 (DFCT) move MegaCli changes for CCoH to 5.3 stream
LSIP200229563 (DFCT) The Exit code displayed for the command “MegaCli64 ccoh adcdev ” is not correct.
LSIP200231249 (DFCT) Resolve MegaCli compilation issues
LSIP200229476 (DFCT) Rename all external references to CCoH to new marketing name
LSIP200230456 (DFCT) Handle review comments for MegaCli merged code
LSIP200231215 (DFCT) RHel5.7: trying to add vd having lvm configuration to cachegroup throws internal error
LSIP200231532 (DFCT) Display dev busy while adding vd when storelib returns busy and fix MegaOEM compilation issue
LSIP200231655 (DFCT) Sprint5-Build14- Name of the Cache Group has to be changed
LSIP200231658 (DFCT) Remove CCoH referemnce in warpdriveinfo command (CCoH License)
LSIP200231805 (DFCT) check in latest linux storelib library build to MegaCli
LSIP200231838 (DFCT) check in ccoh readme file to MegaCli
LSIP200232318 (DFCT) Update the SLIR2 point release 5 binary in MegaCLI stream
LSIP200232229 (DFCT) In the Linux MegaCLI readme file mention that lib_Utils2-1.xxx.rpm but I dont find this file along with megaCLI.
LSIP200230107 (DFCT) AdpHWdevice command is unsupported in DOS MegaOEM
LSIP200231053 (DFCT) MegaCLI help for "perfmon" command contains mispell word "minuts"
LSIP200230224 (DFCT) PDlist command is removing in between lines while printing
LSIP200230506 (DFCT) ProgDsply option is not working in VMWare MegaCli
LSIP200210421 (DFCT) Cannot flash the 16MB FW file in Dos based Megacli
LSIP200212540 (DFCT) (RW LSIP200187758) Installation of MegaSCU failed dependencies error-RH6x64bit OS
LSIP200223206 (DFCT) Porting from 11M08 to MR 5.2
LSIP200224089 (DFCT) AdpNvram clear command is not working for IMR controller
LSIP200223716 (DFCT) (RW LSIP200222444) CLI getbbumodes returns Failed
LSIP200223718 (DFCT) (RW LSIP200222444) CLI getbbumodes returns Failed
LSIP200224510 (DFCT) MegaCLI online help need to format with only 80 characters per line
LSIP200231426 (DFCT) MegaSCU AdpSettings can't program controller with an init file
LSIP200224890 (DFCT) MegaCLI64-bit does not detect TB controller on RHEL 6.1 64-bit [ issue fixed in 11M08 porting to MR 5.2 ]
LSIP200222839 (DFCT) MegaCli BBUStatus cmd shows inconsistent values for different BBU types
LSIP200209267 (DFCT) MegaCli does not show correct capacity information for SuperCap
LSIP200210113 (DFCT) Naming convention for CacheCade (Instead of IR using Defect)
LSIP200210861 (DFCT) This defect for forward porting and backward porting of PR-LSIP200187637
LSIP200210741 (DFCT) help file not updated with method to set the bbumode
LSIP200210670 (DFCT) CLI sees characters "\n" in adpbbucmd command before Transparent Learn string for supercap
LSIP200098881 (DFCT) (RW LSIP200086230) Different TimeStamps values in MegaCLI Ctrl Eventlog
LSIP200212405 (DFCT) Online help for MegaCLI displays "PreventPIImport" as "PeventPIImport"
LSIP200223256 (DFCT) Due to PR:LSIP200122939 scoping has been changed, need to take off the old chagnes.
LSIP200223574 (DFCT) Cannot set BBU modes using "adpbbucmd SetBbuProperties" command
LSIP200224091 (DFCT) PR:LSIP200122939:Real Time Scheduler for Relearn : Scoping has been changed, changing the code accordingly.
LSIP200224227 (DFCT) CLI setting some other day of the week instead of particular Day
LSIP200224179 (DFCT) Memory violation for day value(DDD) is diffrent from days of week.
LSIP200224241 (DFCT) Show battery capacity info (runTimeToEmpty,averageTimeToEmpty and averageTimeToFull) in human read able form.
LSIP200224119 (DFCT) Need to block Set BBU properties command for TMMC battery type with transparent Learn.
LSIP200224394 (DFCT) CLI not showing 'none' for 'next learn time' when 'auto learn mode' is 'Warn via Event' or 'Disabled' in bbu proeprties
LSIP200224697 (DFCT) When fire "AdpBBucmd schedulelearn DSbl a0" command then showing improper message "Controller not supported"
LSIP200224836 (DFCT) Installation Linux VMWare : missing libraries
LSIP200224515 (DFCT) MegaCLI displays schedule time in a strange format
LSIP200225004 (DFCT) In CLI For DST zone "adpbbucmd schedulelearn setstarttime mon 7 a0" command setting it on 5 AM not 7 AM
LSIP200224937 (DFCT) ADRA(Adaptive Read Aead) is stil supported in CLI that not supported in FW. Remove it from all supported commands.
LSIP200229523 (DFCT) (RW LSIP200224515) MegaCLI displays schedule time in a strange format
LSIP200229697 (DFCT) CLI setting DiskCachePolicy as unchanged instead of Disabled for OEM.
LSIP200212808 (DFCT) Porting of defect changes done in 11M02 to PERC 8.1
LSIP200211426 (DFCT) Using Megacli able to create a VD with MAX Powersave policy when disablePowerSavings set to 14
LSIP200212401 (DFCT) Execute MegaCli64 in FreeBSD 8.2x64bit got Permission denied
LSIP200212887 (DFCT) Creating VD using MegaCli/MegaCli64 in FreeBSD return "No match" error
LSIP200221351 (DFCT) Defect to check-in the file changes done for building a vib package of VMware_MN
LSIP200076838 (DFCT) "Invalid Key:CHTIMER” While we were changed only BGI, Stripsize. Flush time.
LSIP200223800 (DFCT) Change the word "Spun" to "Spin" to correct grammar for default response text
LSIP200223832 (DFCT) MWCLI: Syntax to Set property for needs to be changed AutoSnapshotSpace.
LSIP200223830 (DFCT) MWCLI: Syntax to Set property for needs to be changed DefaultSnapshotSpace.
LSIP200224773 (DFCT) MegaCLI:BBU Information is not alligned properly
LSIP200224837 (DFCT) Windows_VMWare_KL: Driver version not available
LSIP200211840 (DFCT) Portings from 11M08
LSIP200211838 (DFCT) New PCLI with new load addresss for 1_TB support
LSIP200212583 (DFCT) 11M08 portings
LSIP200222609 (DFCT) adpbbucmd getbbumodes does not displays any information as indicated on the help
LSIP200230220 (DFCT) FreeBSD MegaCli no 64bit available - both are 32 bit
LSIP200221349 (DFCT) CfgAllFreeDrv command detailed online help is not updated properly
LSIP200221568 (DFCT) MegaCLI help for adpbbucmd contains multiple misspell words
LSIP200196784 (DFCT) MegaCli : Unable to create Cachecade VD using Megacli
LSIP200209883 (DFCT) Issue in verifying CC2.0 feature support bit in CLI.
LSIP200209882 (DFCT) Add CtrlId information as part AdpAllInfo command.
LSIP200070255 (DFCT) (RW LSIP200055580) MegaCli 80015 for Sparc missing OS version number
LSIP200199421 (DFCT) MegaCli Online help need to provide more information for commands with a "filename" input
LSIP200167604 (DFCT) After unzipping VMWare MegaCLI and executing it reports "Permission Denied"
LSIP200199125 (DFCT) Macon MegaDCli : MegaDcli application hangs after creating the any VD.
LSIP200199605 (DFCT) SW-Macon : Could not create multiple VDs in same array with DOSCLI
LSIP200200420 (DFCT) SCU DCLI: DCLI fails to display temparature of SATA drives, however, OS level apps( CLI and MSM) show the same
LSIP200200257 (DFCT) Not able to set the link speed to 6GB/s as per the information given in the help using MegaCli.
LSIP200209972 (DFCT) M0flashing is not working with Dos based Megascu
LSIP200200461 (DFCT) Enhanced Import option fails to be enabled
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 03/30/12
Version Numbers: MegaCLI
=============== ===========
Current Version 8.02.21
Previous Version 8.02.16
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
VMware
Windows
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
LSIP200149500 (DFCT) Macon:SCU:System hangs during DCLI/ESRT2 commanad execution when both the controllers(AHCI and SCU) are enabled in bios.
LSIP200185414 (DFCT) MegaCLI does not return any value for Driver version.
LSIP200151500 (DFCT) MegaCli packages for both SPARC and x86 do not verify architecture ty
LSIP200185426 (DFCT) Enclosure info gives segmentation fault in cli
LSIP200149492 (DFCT) Help for Drive Performance Monitoring commands is not available.
LSIP200186064 (DFCT) There is no return message in EFI if you try to create more than 8 VD
LSIP200151323 (DFCT) Remaining Capacity Alarm is set to Yes for iBBU08 as displayed by MegaCli but it should not.
LSIP200149845 (DFCT) "Inquiry Data" info differs from SPARC with SSDs attached
LSIP200186189 (DFCT) Need the ability to deselect through MegaCLI bootable drives from boot list
LSIP200184706 (DFCT) When checking rebuild state of PD using progdsply in EFI, screen keeps on running though esc key pressed
LSIP200185859 (DFCT) CLI BBU design information does not show correct values with supercap present.
LSIP200148605 (CR) Ability to get settings for delaySOD paramaters using MegaOEM or MegaCLI
LSIP200151127 (CR) Add Ubuntu support to MegaCLI
LSIP200082222 (CR) MR port to Invader
LSIP200082262 (CR) 12 Gb/s functionality
LSIP200083522 (CR) Need the ability to deselect through MegaCLI bootable drives from boot list
LSIP200188010 (DFCT) Various commands failed on MegaCLI 8.02.18 when running BST - See below
LSIP200196726 (DFCT) In AdpBbuCmd -SetBbuProperties command AutoLearnMode can set even transparentLearns field is non zero
LSIP200166747 (CR) Add SGPIO for Medusa
LSIP200185421 (CR) Request to include Megascu read of BMU version
LSIP200199347 (DFCT) MegaCli online help for -AdpSetProp -DisableLdPS is not very helpful
LSIP200199754 (DFCT) MegaCli -AdpbbuCmd -SetBbuProperties command does not check for valid input file
LSIP200199689 (DFCT) MegaCli online help does not show RAID60
LSIP200209267 (DFCT) MegaCli does not show correct capacity information for SuperCap
LSIP200199605 (DFCT) SW-Macon : Could not create multiple VDs in same array with DOSCLI
LSIP200199197 (DFCT) MegaCLI online help report duplicate entry for PDInstantSecureErase
LSIP200199860 (DFCT) MegaCli -PDCpyBk online help is not clear which could lead to data lost
LSIP200209465 (DFCT) Porting of MegaSCU64 Linux
LSIP200199316 (DFCT) MegaCLI online help does not show the value for "perfmode"
LSIP200209270 (DFCT) Can not flash FW ( microcode fw for Cacheoffload controller) using MegaCLI 8.02.15
LSIP200200420 (DFCT) SCU DCLI: DCLI fails to display temparature of SATA drives, however, OS level apps( CLI and MSM) show the same
LSIP200199345 (DFCT) MegaCli online help for "adpsetprop" missing some commands
LSIP200198611 (DFCT) While installing RWC2_linux_64(11.08.02.01),CmdTool install asks for dependencies
LSIP200199125 (DFCT) Macon MegaDCli : MegaDcli application hangs after creating the any VD.
LSIP200199213 (DFCT) MegaCLI help should not have a separate section for array create and controller "get and set" features for PI
LSIP200196784 (DFCT) MegaCli : Unable to create Cachecade VD using Megacli
LSIP200209883 (DFCT) Issue in verifying CC2.0 feature support bit in CLI.
LSIP200209882 (DFCT) Add CtrlId information as part AdpAllInfo command.
LSIP200167604 (DFCT) After unzipping VMWare MegaCLI and executing it reports "Permission Denied"
LSIP200199421 (DFCT) MegaCli Online help need to provide more information for commands with a "filename" input
LSIP200200461 (DFCT) Enhanced Import option fails to be enabled
LSIP200210113 (DFCT) Naming convention for CacheCade (Instead of IR using Defect)
LSIP200186909 (CR) Enable copy back on SMART - TB
LSIP200187637 (CR) Generally available support of selected battery modes for iBBU08.
LSIP200187669 (CR) Update CacheCade product names in all utilities and user manuals
Known Restrictions
================
1. NONE
Known Bugs
==========
1. NONE
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
Component:
=========
SAS MegaRAID MegaCLI
Release Date: 08/11/2011
Version Numbers: MegaCLI
=============== ===========
Current Version 8.02.16
Previous Version 8.01.06
Contents:
=========
This package contains MegaCLI for the following OSes:
DOS
FreeBSD
Linux
Solaris
VMware
Windows
Use the MegaCLI components from the folder that matches your OS.
Enhancements and Bug Fixes
==========================
LSIP200148740 (CO) (auto4comp UNIV_VIVA_Cli) MegaSCU (DOS4GW) change request to support OEM iBBU calibration process
LSIP200148762 (CO) (auto4comp UNIV_VIVA_Cli) TB FW: Do not let WebBIOS to display "BBU Retention Time" and "Estimated Time To Recharge".
LSIP200184338 (CO) (auto4comp UNIV_VIVA_Cli) TB FW Re-activate the user option to enable Patrol Read on SSD.
LSIP200099745 (CO) (auto4comp UNIV_VIVA_Cli) Enclosure related CLI improvements
LSIP200099746 (CO) (auto4comp UNIV_VIVA_PCLI) Enclosure related CLI improvements
LSIP200099762 (CO) (auto4comp UNIV_VIVA_Cli) PD diag state - Shield State
LSIP200099768 (CO) (auto4comp UNIV_VIVA_Cli) Shield state properties
LSIP200099803 (CO) (auto4comp UNIV_VIVA_Cli) PD status commands under CLI
LSIP200099804 (CO) (auto4comp UNIV_VIVA_PCLI) PD status commands under CLI
LSIP200173292 (CO) (auto4comp UNIV_VIVA_Cli) FW to take PCI IDs & SAS Address out of SBR or TSOC (OEM selectable per value)
LSIP200153885 (CO) (auto4comp UNIV_VIVA_Cli) Update MR SAS LSI applications for VMWare ESXi MN Release
LSIP200099807 (CO) (auto4comp UNIV_VIVA_Cli) additional MR diags
LSIP200099771 (CO) (auto4comp UNIV_VIVA_Cli) CLI battery commands
LSIP200100159 (CO) (auto4comp UNIV_VIVA_Cli) CLI version command
LSIP200154735 (CO) (auto4comp UNIV_VIVA_Cli) FreeBSD x64 support for 6Gb/s (TBolt) MegaRAID line
LSIP200099844 (CO) (auto4comp UNIV_VIVA_Cli) Request to use Unconfigured Good Drives for a HotSpare if no spare defined.
LSIP200099855 (CO) (auto4comp UNIV_VIVA_Cli) Emergency spare may ignore mixing policies
LSIP200099877 (CO) (auto4comp UNIV_VIVA_Cli) DGs revertible HSP attributes sticky on adoption.
LSIP200099896 (CO) (auto4comp UNIV_VIVA_Cli) Suspend / resume background tasks
LSIP200088557 (CO) (auto4comp UNIV_VIVA_Cli) Need ability to RESET expander from behind MegaSAS
LSIP200135217 (CO) (auto4comp UNIV_VIVA_Cli) SW licensing. Support FoD for PF activations on MegaRAID
LSIP200150237 (CO) (auto4comp UNIV_VIVA_Cli) Need MFC bit for CacheCade 2.0
LSIP200150509 (CO) (auto4comp UNIV_VIVA_Cli) Need MFC bit for CacheCade 2.0
LSIP200099823 (CO) (auto4comp UNIV_VIVA_Cli) erase vd function
LSIP200135617 (CO) (LSIP200106069) CLI. Add performance monitor related functions to MegaOEM
LSIP200101547 (CO) (auto4comp UNIV_VIVA_Cli) iMR unconfigured disks naming for JBOD disks
LSIP200101549 (CO) (auto4comp UNIV_VIVA_PCLI) iMR unconfigured disks naming for JBOD disks
LSIP200112561 (DFCT) DIF: MegaSCU CMD adpsettings -read -f settings.txt a0 does not work
LSIP200118922 (DFCT) Battery state option not available in CLI
LSIP200121822 (DFCT) CLI version commands are not added in help file.
LSIP200146132 (DFCT) MegaSCU needs to have a PR to set Mfg name & Mfg Date of StingRay ibbu
LSIP200154218 (DFCT) MegaCli vague message displayed when SpinDownTime value is too big
LSIP200168791 (DFCT) This defect is created to check-in files for Defects:LSIP200167601& LSIP200167602
LSIP200169584 (DFCT) Unable to flash 16mb file using adpM0flash on TB(MR controller) using CMDTOOL
LSIP200171972 (DFCT) Enclosure temperatures are reported 20 deg C higher than actual temperature.
LSIP200060991 (DFCT) DSIII: MegaCLI -adpgetprop defaultldpolicy -a0 return incorrect info
LSIP200141543 (DFCT) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi VD
LSIP200147521 (DFCT) No syntax for VD erase operation on a VD in MegaCLI 8.02.07
LSIP200147590 (DFCT) MEGASCU Progdsply/showprog command displays the progress of REBUILD and PDCPYBK event even after suspended.
LSIP200147591 (DFCT) MEGASCU-Patrol read info displays the state as "unknown" when the process is suspended .
LSIP200173919 (DFCT) (Defer LSIP200168402) Patrol read info displays the state as "unknown" when the process is suspended .
LSIP200173920 (DFCT) (Defer LSIP200168399) VD numbering in CLI using command ldpdinfo .
LSIP200148211 (DFCT) Physical Disk information missing in command CFGDSPLY
LSIP200148112 (DFCT) (RW LSIP200141543) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi VD
LSIP200149139 (DFCT) (RW LSIP200148112) (RW LSIP200141543) DIF cli mixing nonPI and Pi pds found cfgalldreedrv command failed to create R0 Pi
LSIP200147977 (DFCT) add AdpGetPciInfo command options in CLI (help menu, DOS support)
LSIP200148550 (DFCT) (RW LSIP200148211) Physical Disk information missing in command CFGDSPLY
LSIP200147562 (DFCT) 8.00.41 on ESXi and ESX 4.1 gives "Permission Denied" after installing MegaCLI
LSIP200149997 (DFCT) (7040217) (Defer LSIP200148994) MegaCli packages for both SPARC and x86 do not verify architecture type
LSIP200184682 (DFCT) Dos MegaCli doesn't show AdpFWFlash command syntax in the help menu.
LSIP200112950 (DFCT) MegaCli command CfgEachDskRaid0 -enblPI -a1 returns 0x01 error
LSIP200113677 (DFCT) Enclosure serial number is not displaying in CLI and PCLI
LSIP200114042 (DFCT) Enclosure FRU number and part number is not displaying in CLI
LSIP200119731 (DFCT) Enclosure type option is not available in CLI
LSIP200121825 (DFCT) Driver version command is not working in linux CLI
LSIP200166294 (DFCT) Unable to flash 16mb file using adpM0flash on TB(MR controller)
LSIP200174078 (DFCT) MegaCLI crashes during Advance Event Capture command
LSIP200148073 (DFCT) Defect to deliver changes for PR LSIP200072686.
LSIP200148459 (DFCT) CLI should not provide "Default" option in "Adpsetprop defaultldpspolicy" command.
LSIP200148495 (DFCT) (Defer LSIP200147731) DSIII: Failed to Set Adapter Properties when run MegaCli -AdpSetProp -DefaultLdPSPolicy -Default -
LSIP200148545 (DFCT) (RW LSIP200148495) (Defer LSIP200147731) DSIII: Failed to Set Adapter Properties when run MegaCli -AdpSetProp -DefaultLd
LSIP200148300 (DFCT) PR LSIP200072686 requires release of CmdTool2 for MN
LSIP200148511 (DFCT) VMware ESXi5.0 - MegaCLI does not work without export the library paths
LSIP200148515 (DFCT) VMware ESXi 5.0 - CmdTool2 returns Segmentation Fault
LSIP200151201 (DFCT) WB:Data not getting generated while trying to capture information through Megacli with IO running in background.
LSIP200119733 (DFCT) Driver version not shown in CLI using "Megacli version driver" command.
LSIP200113675 (DFCT) CLI version commands are not added in help page.
LSIP200114029 (DFCT) Battery backup charge time is not as per scopping in CLI
LSIP200111844 (DFCT) Remove unsupport DIF CMD in MegaCLI
LSIP200119430 (DFCT) (RW LSIP200113679) MegaCLI "ldinfo" page Mirror data size is shown as reduntant data size
LSIP200119788 (DFCT) Junk character display for SATA WWN field in CLI.
LSIP200114071 (DFCT) Bad Block table information is not shown when execute the cli command with - lall.
LSIP200121864 (DFCT) Enclosure FRU number and part number is not displaying in PCLI
LSIP200123173 (DFCT) Getbbtentries command gives some corrected and uncorrected entries in PCLI eventhough no bad blocks exists
LSIP200124552 (DFCT) MegaSCU: No help file for DIF support feature
LSIP200138571 (DFCT) Defect to port PR-LSIP200100398 : Provide the chip version/revision for MegaRAID controllers thru MegaCLI
LSIP200119187 (DFCT) (7002618) Unable to download disk f/w through MegaCLI
LSIP200147898 (DFCT) SWR: Macon:SCU: Efi cli pdinfo for SATA drives shows junk value for Enquiry data .
LSIP200148634 (DFCT) SWR:Macon:SCU-Cli shows max LD per array as 16.
LSIP200150590 (DFCT) (RW LSIP200148634) SWR:Macon:SCU-Cli shows max LD per array as 16.
LSIP200147485 (DFCT) Macon: In EFI environment CC cannot be started on a VD after performing Fast Init
LSIP200151366 (DFCT) SWR:Macon:CLI versions are different as displayed when queried and in release notes
LSIP200105726 (DFCT) Dummy defect for 11M02 PR
LSIP200105748 (DFCT) Dummy Defect for Removing Comments from files
LSIP200110822 (DFCT) MegaCli PdFWdown missing "-" before EncdevId
LSIP200110789 (DFCT) MegaCli PD FW download to multiple devices not supported, command output needs to be changed
LSIP200099006 (DFCT) For ibbu08, MegaCLI -GetBbuCapacityInfo returns zero for max error, remainging capacity alarm, and remaining time alarm
LSIP200111893 (DFCT) Porting the defect LSIP200099006.
LSIP200111888 (DFCT) Porting the defect LSIP200077064. (PreBootCli - AdpEventLog fails with exit code 0x01.)
LSIP200113872 (DFCT) Diff PR Merging in 11m02
LSIP200113364 (DFCT) Suspend/Resume fails to work on windows Cli for CC
LSIP200113851 (DFCT) CLI version commands are not working in PCLI
LSIP200114598 (DFCT) PCli fails to work.
LSIP200119427 (DFCT) Cli shows wrong information about Emergency spare
LSIP200119254 (DFCT) FW crashes when execute "adpbbucmd" command in PCLI
LSIP200120059 (DFCT) MegaCli fails to print the operation strings.
LSIP200120725 (DFCT) Battery backup charge time is not as per scopping in CLI
LSIP200114553 (DFCT) In Solaris and SPARC, Un installation time not removing MegaRAID directory.
LSIP200122180 (DFCT) Name change for iBBU08 for TB.
LSIP200152862 (DFCT) Need to CheckIn PR(LSIP200137246) (Univ_Viva_Cli)tools to address latency
LSIP200154233 (DFCT) Battery type need to update
LSIP200156117 (DFCT) MegaCli ShowSummary does not display system info
LSIP200158424 (DFCT) OEM Enclosure PR need to be complete(49251)
LSIP200168903 (DFCT) Progdsply/showprog command displays the progress of rebuild event even after it is suspended.
LSIP200172526 (DFCT) The command showsummary doesnot display system information .
LSIP200147689 (DFCT) Porting of CC2 PR
LSIP200147743 (DFCT) need some extra changes for CC2
LSIP200148065 (DFCT) Porting Cache-offload PR
LSIP200148087 (DFCT) UNIV_VIVA_Cli crashes when spanned array is created .
LSIP200148138 (DFCT) Unable to capture performance data with Megacli64
LSIP200148231 (DFCT) Need to update perf mon cmd code
LSIP200148465 (DFCT) CLI does not show if CahceCade 2 is enabled on the controller
LSIP200148688 (DFCT) (RW LSIP200148465) CLI does not show if CahceCade 2 is enabled on the controller
LSIP200144918 (DFCT) Line CacheOffload equals 0 causes Pre-Man to fail
LSIP200148710 (DFCT) AdpHwDevice read command not working properly
LSIP200148711 (DFCT) Porting the Pr-97510
LSIP200148835 (DFCT) Porting PR-55434
LSIP200149728 (DFCT) UNIV_VIVA_cli fails to create Virtual Drives using latest cachecade firmware .
LSIP200150311 (DFCT) WB:Megacli crashes while trying to capture information when IO is running in background.
LSIP200150662 (DFCT) Name changeing for Cache cade feature
LSIP200104408 (DFCT) LSIP200049226, LSIP200049215 PD/VD secure erase
LSIP200105750 (DFCT) Dummy defect to check in secure erase changes
LSIP200111056 (DFCT) MegaCLI 8.01.01 enable/disables PI command does not work
LSIP200111338 (DFCT) Megacli Ver 8.01.01-DIF does not show VD properties if PI is enable or disabled
LSIP200111846 (DFCT) MegaCLI should not allow to enable DIF with Liberator controller
LSIP200112378 (DFCT) improvement needed for output of ./MegaCli LdGetProp -dsblpi -l0 -a2 and ldinfo
LSIP200119591 (DFCT) MegaCli fails to work
LSIP200119449 (DFCT) CLI : After aborting VD erase on a VD, veifying prog dsply , shows as Check Consistency on VD not in progress.
LSIP200121826 (DFCT) In CLI help file "UEFI" command is not added in version commands.
LSIP200121841 (DFCT) "Version uefi a0" failed to show UEFI version in EFI host CLI
LSIP200124586 (DFCT) (RW LSIP200121841) "Version uefi a0" failed to show UEFI version in EFI host CLI
LSIP200124588 (DFCT) (RW LSIP200121826) In CLI help file "UEFI" command is not added in version commands.
LSIP200173918 (DFCT) EFI CLI- Driver seperation changes
LSIP200170447 (DFCT) efiHostCli does not work with 2208 products
LSIP200148615 (DFCT) SWR:Macon:DCLI: DCLI does not support 8 drives.
LSIP200148613 (DFCT) SWR:Macon:DCLI:Appropriate error messgae should be displayed for Background operation not supported
LSIP200155836 (DFCT) Megacli ldgetprop consistency lx aN gives invalid output
LSIP200156087 (DFCT) CLI command to enable DPM is not shown in help file but it works.
LSIP200166715 (DFCT) (RW LSIP200159708) CLI does not read entire package version during flashing, causing FW upgrade to report error
LSIP200148921 (DFCT) Forward Porting the changes
LSIP200100106 (DFCT) Assgning the VD numbering issue in Cli after deletion of VDs
LSIP200121545 (DFCT) VD Numbering issue in CLI after deletion of VD.
LSIP200122430 (DFCT) By typing MegaOem commands like v,help.. It shows all MegaSCU commands, and working like MegaSCU
LSIP200123575 (DFCT) (CL LSIP200123543) Fahrenheit values are not shown for SATA and SSD drives in CLI drive temperature field.
LSIP200099360 (DFCT) Porting 10M08 changes to 10M09 and 10M12
LSIP200100910 (DFCT) FW reports more than 1 enclosures in enclosure list while connect only 1 enclosure with multi path
LSIP200113012 (DFCT) Using MegaCLI to create a RAID1 array under FreeBSD 8.1 result in an error message: No match
LSIP200123317 (DFCT) MegaCli is unable to create VD with power policy settings.
LSIP200105052 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted
LSIP200105743 (DFCT) cfgeachdskraid0 command fails
LSIP200106000 (DFCT) Dummy defect to modify PCLI flash address
LSIP200120037 (DFCT) Mode 0 flash support for TB controllers with 32MB flash
Known Restrictions
================
1. NONE
Known Bugs
==========
1. NONE
Installation Commands:
=======================
Run MegaCli from the Command Prompt. Use -h option to see help menu.
SAS MegaRAID MegaCLI
Release Date: 02/28/2011
Version Numbers: MegaCLI
=============== ===========
Current Version 8.01.06
Previous Version 8.00.40
Enhancements and Bug Fixes
==========================
Added support for 9265-8i and 9285-8e controllers
LSIP200101547 (CO) iMR unconfigured disks naming for JBOD disks
LSIP200101549 (CO) iMR unconfigured disks naming for JBOD disks
LSIP200072536 (CO) Phy Info (Direct Attached) reporting
LSIP200072543 (CO) Phy Settings (Direct Attached)
LSIP200072524 (CO) Advanced Event Capture
LSIP200089240 (DFCT) We need to Set Permission while executing the CLI in Linux (SLES 11-64bit)
LSIP200084303 (DFCT) Can not flash FW using MegaCLI on 9265 Controller. Works in MSM.
LSIP200095215 (DFCT) Megaware makefile changes
LSIP200099543 (DFCT) Windows Megacli for Vmware unable to detect the Vmware Server Host controller iMR 9285
LSIP200100106 (DFCT) Assgning the VD numbering issue in Cli after deletion of VDs
LSIP200121545 (DFCT) VD Numbering issue in CLI after deletion of VD.
LSIP200122430 (DFCT) By typing MegaOem commands like v,help., it shows wrong commands
LSIP200123575 (DFCT) (CL LSIP200123543) Fahrenheit values are not shown for SATA and SSD drives in CLI drive temperature field.
LSIP200099360 (DFCT) Porting 10M08 changes to 10M09 and 10M12
LSIP200100910 (DFCT) FW reports more than 1 enclosures in enclosure list while connect only 1 enclosure with multi path
LSIP200113012 (DFCT) Using MegaCLI to create a RAID1 array under FreeBSD 8.1 result in an error message: No match
LSIP200123317 (DFCT) MegaCli is unable to create VD with power policy settings.
LSIP200085810 (DFCT) MegaCli PdFwDownload output missing a dash
LSIP200089295 (DFCT) -adpsettings command is not expecting "s" on end of "EnableLedHeaders" setting
LSIP200089930 (DFCT) Junk character in the help message for “encinfo” command
LSIP200095273 (DFCT) MegaCLI 8.00.30 crashed during a -adpallinfo command to an iMR controller.
LSIP200110822 (DFCT) MegaCli PdFWdown missing "-" before EncdevId
LSIP200110789 (DFCT) MegaCli PD FW download to multiple devices not supported, command output needs to be changed
LSIP200099006 (DFCT) For ibbu08, MegaCLI -GetBbuCapacityInfo returns zero for max error, remainging capacity alarm, and remaining time alarm
LSIP200111893 (DFCT) Porting the defect LSIP200099006.
LSIP200111888 (DFCT) Porting the defect LSIP200077064. (PreBootCli - AdpEventLog fails with exit code 0x01.)
LSIP200122180 (DFCT) Name change for iBBU08 for 9265
LSIP200081963 (DFCT) Cannot clear DPM data using the -clear option
LSIP200077322 (DFCT) CLI displays incorrect information when DPM lct command is issue
LSIP200077324 (DFCT) CLI displays data from DPM histogram command incorrectly
LSIP200077326 (DFCT) Latest CLI reports error when issue any AEC command (All AEC commands are not working)
LSIP200083390 (DFCT) Defect to accomodate API changes in MegaWare1.2 boxcar
LSIP200085172 (DFCT) MegaCLI output for DPM ext command does not align correctly
LSIP200094822 (DFCT) Porting defect fixes from 10M09 to 10M12
LSIP200097425 (DFCT) DIF syntax errors AdpSetprop -preventPiImport
LSIP200105052 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted
LSIP200105743 (DFCT) cfgeachdskraid0 command fails
LSIP200106000 (DFCT) Dummy defect to modify PCLI flash address
LSIP200120037 (DFCT) Mode 0 flash support for TB controllers with 32MB flash
LSIP200083430 (DFCT) Implementation of MegaWare 1.1 in MegaPCLI
LSIP200084039 (DFCT) MegaWare support code changes
LSIP200075421 (DFCT) SWR: MegaDcli takes too much to execute command
LSIP200087724 (DFCT) Intermittent issue seen while Clearing Configuraton through MegaCLI in RHEL 6 B2 64bit
LSIP200097535 (DFCT) Dummy defect to update version of DCLI
LSIP200097793 (DFCT) EFI Cli is displaying "Created VD0" even for 2nd VD
LSIP200097811 (DFCT) To check in EFI CLI binary
LSIP200089369 (DFCT) (#33990.1) Incorrect Display View Mirror Infos for all VD's in Windows CLI
LSIP200096227 (DFCT) By pressing Ctrl-Y(PCLI) in POST message, its going to megamon in fw and also not getting pcli command promot .
LSIP200096792 (DFCT) CLI crashes when using "snapshot info" command on the repository VD
LSIP200097032 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted
Release Date: 12/10/2010
Version Numbers: MegaCLI
=============== ===========
Current Version 8.00.40
Previous Version 8.00.29
Enhancements and Bug Fixes
==========================
LSIP200097574 (DFCT) MegaCliKL is not able to access the Host Machine
LSIP200063469 (CO) Check internal backplane SES page for Backplane Bay ID and display in mgmt tools
LSIP200063410/LSIP200063415 (CO) Break R1 Mirror
LSIP200063457 (CO) Support for variable rate HDDs
LSIP200075203 (CO) RAID Firmware to read controller thermal sensors to get chip and board temps
LSIP200070634 (CO) Customer requested these EFI:CLI commands are required for their testing
LSIP200073881 (CO) Provide PCI bus and device id for a selected controller thru MegaCLI
LSIP200072376 (CO) SWRAID. Develop CLI for uEFI 2.2
LSIP200083287 (CO) SW licensing. Verbiage changes in MegaRAID management tools
LSIP200076197 (DFCT) “No more interfaces” on executing most of the CLI command
LSIP200075420 (DFCT) SWR: MegaDCli does not detect the PDs
LSIP200076437 (DFCT) SWR5: Unable to create Raid 5 thru DCLI
LSIP200087722 (DFCT) DCLI -After creating R5, we cant delete the VD or clear the config.
LSIP200084490 (DFCT) Porting 10M08 chnages to 10M09
LSIP200085665 (DFCT) "MegaCli pdfwdownload" command is not flashing PD Firmware for Multiple PD's at a time.
LSIP200087720 (DFCT) DCLI - Version Info showing wrong Date.
LSIP200085497 (DFCT) SWR5: Cannot create config and clear config using EFI CLI
LSIP200087729 (DFCT) DCLI/EFI CLI - "pdfwdownload" command is not exists in the help file of DCLI and EFI CLI.
LSIP200075421 (DFCT) SWR: MegaDcli takes too much to execute command
LSIP200087724 (DFCT) Intermittent issue seen while Clearing Configuraton through MegaCLI in RHEL 6 B2 64bit
LSIP200097793 (DFCT) EFI Cli is displaying "Created VD0" even for 2nd VD
LSIP200082937 (DFCT) Defect to merge DSW-3 code
LSIP200084314 (DFCT) AutoDeleteOldestSnapshot doesnt work in the CLI
LSIP200018606/LSIP200018607 (DFCT) "./MegaCli64 adpeventlog getlatest n ax" fails when ldbi is running on the controllers
LSIP200087587 (DFCT) Defect to accomodate for non-availablity of DSW-3 feature on iMR controllers
LSIP200089369 (DFCT) (#33990.1) Incorrect Display View Mirror Infos for all VD's in Windows CLI
LSIP200096227 (DFCT) By pressing Ctrl-Y(PCLI) in POST message, its going to megamon in fw and also not getting pcli command promot .
LSIP200096792 (DFCT) CLI crashes when using "snapshot info" command on the repository VD
LSIP200097032 (DFCT) CLI is allowing user to set MAXWITHCACHE ps policy for one of the OEM, which should actually be restricted
LSIP200085810 (DFCT) MegaCli PdFwDownload output missing a dash
LSIP200089295 (DFCT) -adpsettings command is not expecting "s" on end of "EnableLedHeaders" setting
LSIP200089930 (DFCT) Junk character in the help message for “encinfo” command
LSIP200095273 (DFCT) MegaCLI 8.00.30 crashed during a -adpallinfo command to a iMR controller.
LSIP200076406 (DFCT) CLI displays 'Stripe' size instead of displaying 'Strip' size in adpallinfo info page
LSIP200082223 (DFCT) "MegaCli -AdpAliLog a0" command showing wrong Adapter values in the adapterinfo field.
LSIP200018511 (DFCT) Linux "MegaCli adpalilog a0" displays garbage, also missing key data comparing to Windows output.
LSIP200082785 (DFCT) Support of AdpGetPciInfo command for recent stream
LSIP200083564 (DFCT) Megacli-8.00.28 : Megacli does not give any progress value for initialization on LD with progdsply
LSIP200086230 (DFCT) Different TimeStamps values in MegaCLI Ctrl Eventlog
LSIP200075258 (DFCT) Create separate binary to configure VMware ESXi through MegaCLI.
LSIP200082000 (DFCT) Help file needs to be updated for MegaCliKL.
LSIP200082431 (DFCT) PFK - MFT_STAT Support
LSIP200077081 (DFCT) Information For Command Parameters is missing in HELP file for the ADPBBUCMD command
LSIP200073835 (DFCT) MegaCLI Enclosure Inquiry returns irrelevant in Vendor Specific Information field
LSIP200076725 (DFCT) Spelling mistake in one of the output of CLI command

Binary file not shown.

View File

@ -1,83 +0,0 @@
#!/bin/bash
# the directory of the script
DIR=`cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd`
echo "Working directory $DIR"
# the temp directory used, within $DIR
WORK_DIR=`mktemp -d -p "$DIR"`
echo "Creating temp working directory $WORK_DIR"
# deletes the temp directory
function cleanup {
rm -rf "$WORK_DIR"
echo "Deleted temp working directory $WORK_DIR"
}
# register the cleanup function to be called on the EXIT signal
trap cleanup EXIT
# Download Files specified in files.diz
while IFS=! read type app version outputfile url md5
do
echo "Downloading $app Version: $version"
#use -O for output file. define $outputfile yourself
wget --no-check-certificate --tries=1 -O $DIR/../$outputfile --timeout=5 "$url"
# use $(..) instead of backticks.
calculated_md5=$(md5sum "$DIR/../$outputfile" | cut -f 1 -d " ")
# compare md5
case "$calculated_md5" in
"$md5" )
echo "$DIR/../$outputfile md5 ok"
;;
*)
echo "$DIR/../$outputfile md5 NOT ok"
exit 1
;;
esac
done < "$DIR/files.diz"
# Extract to specified dir and set some variables
while IFS=! read type app version outputfile url md5
do
mkdir -p $WORK_DIR/${type}
pushd $WORK_DIR/${type}
unzip $DIR/../$outputfile
popd
mkdir -p $WORK_DIR/${app}-${version}/${type}
dos2unix $WORK_DIR/${type}/*.txt
mv $WORK_DIR/${type}/*.txt $WORK_DIR/${app}-${version}
pushd $WORK_DIR/${app}-${version}/${type}
rpm2cpio $WORK_DIR/${type}/Linux/*.rpm | cpio -idmv
case "${type}" in
"amd64" )
rm -f opt/MegaRAID/MegaCli/MegaCli
;;
"i386" )
rm -f opt/MegaRAID/MegaCli/MegaCli64
rm -f opt/MegaRAID/MegaCli/libstorelibir-2.so*
;;
*)
echo "Wrong arch"
exit 1
;;
esac
echo "${app}_${version}.orig.tar.gz" > $WORK_DIR/filename.txt
echo "${app}-${version}" > $WORK_DIR/dirname.txt
echo "${version}" > $WORK_DIR/version.txt
popd
done < "$DIR/files.diz"
FILENAME=`cat $WORK_DIR/filename.txt`
DIRNAME=`cat $WORK_DIR/dirname.txt`
echo "Creating $DIR/../$FILENAME "
pushd $WORK_DIR
tar -czf $DIR/../$FILENAME $DIRNAME
popd
VER=`cat $WORK_DIR/version.txt`
echo "Importing $DIR/../$FILENAME as $VER into git"
cleanup
gbp import-orig --pristine-tar -u $VER $DIR/../$FILENAME
exit 0

10
debian/README.source vendored
View File

@ -1,10 +0,0 @@
megacli (8.04.07-1) unstable; urgency=low
Sources have been repacked from the following upstream archive:
246ca19750965066f97730e704718cb8 8.04.07_MegaCLI.zip
Contents of MegaCli-8.04.07-1.noarch.rpm and Lib_Utils-1.00-09.noarch.rpm
have been extracted after being turned into tarball using alien.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Mon, 20 Aug 2012 22:23:22 +0200

66
debian/changelog vendored
View File

@ -1,66 +0,0 @@
megacli (8.7.14.1) UNRELEASED; urgency=medium
* Rebuild for all Distros
* import
* Imported Upstream version 8.07.14
-- Mario Fetka <mario@localhost.localdomain> Thu, 26 May 2016 18:01:20 +0200
megacli (8.07.14-1) unstable; urgency=medium
* New upstream release.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Sun, 26 Jan 2014 00:40:52 +0100
megacli (8.04.07-1) unstable; urgency=low
* New upstream release (Closes: #221).
* Rewrite debian/copyright to use the machine readable format.
- Re-wrap website EULA using vim command: !%fold -s -w76 and a couple
of sed.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Mon, 20 Aug 2012 22:23:22 +0200
megacli (8.02.16-1) unstable; urgency=low
* New upstream release (Closes: #60).
* Rewrite most of the packaging because megacli now needs a specific
library (loaded using a shell wrapper).
* Include megacli user guide PDF (Closes: #178).
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Mon, 30 Jan 2012 17:26:35 +0100
megacli (5.00.12-1) unstable; urgency=low
* New upstream release.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Sun, 16 Aug 2009 01:58:43 +0200
megacli (4.00.11-1) unstable; urgency=low
* New upstream release.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Mon, 27 Apr 2009 19:21:30 +0200
megacli (4.00.08-1) unstable; urgency=low
* New upstream release.
* Rename both source and binary packages from megaclisas to megacli.
* Support IA-64 package.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Thu, 11 Dec 2008 17:33:57 +0100
megaclisas (2.00.11-1) unstable; urgency=low
* New upstream release.
* Add upstream changelog.
* Bump Standards-Version to 3.8.0.
* Some packaging cleanup.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Thu, 21 Aug 2008 15:42:02 +0200
megaclisas (1.01.40-1) unstable; urgency=low
* Initial release.
-- Adam Cécile (Le_Vert) <gandalf@le-vert.net> Tue, 11 Dec 2007 16:52:58 +0100

1
debian/compat vendored
View File

@ -1 +0,0 @@
7

16
debian/control vendored
View File

@ -1,16 +0,0 @@
Source: megacli
Section: admin
Priority: optional
Maintainer: Adam Cécile (Le_Vert) <gandalf@le-vert.net>
Build-Depends: debhelper (>= 5), libncurses5
Standards-Version: 3.9.5
Homepage: http://www.lsi.com/support/Pages/Download-Results.aspx?keyword=megacli
Package: megacli
Provides: megaclisas
Replaces: megaclisas
Conflicts: megaclisas
Architecture: i386 amd64
Depends: ${shlibs:Depends}, ${misc:Depends}
Description: LSI Logic MegaRAID SAS MegaCLI
Tool to read and setup LSI Logic MegaRAID SAS HW RAID HBAs.

583
debian/copyright vendored
View File

@ -1,583 +0,0 @@
Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: megacli
Source: http://www.lsi.com/support/Pages/Download-Results.aspx?keyword=megacli
Files: *
Copyright: Copyright (C) 2012 LSI Corporation
License: Proprietary
IMPORTANT - READ CAREFULLY: This Software License Agreement ("SLA") is a
legal agreement between you (either an individual or a single entity) and
LSI Corporation ("LSI") for the LSI Licensed Software identified herein and
licensed herein, which includes computer software and may include
associated media, printed materials, and "online" or electronic
documentation ("LICENSED SOFTWARE"). By installing, copying, or otherwise
using the LICENSED SOFTWARE, you agree to be bound by the terms of this
SLA. If you do not agree to the terms of this SLA, you may not install,
copy or use the LICENSED SOFTWARE. The LICENSED SOFTWARE is licensed, not
sold.
.
NOW THEREFORE, in consideration of the foregoing and the mutual promises
and covenants contained in this SLA (also referred to as "Agreement"), the
parties hereby agree as follows:
.
1. Definitions
.
1.1. "Authorized Use for LSI Source Code" means use of the LSI Source Code
solely for the purpose of internally developing, modifying, integrating and
testing Licensee's Products to interface with LSI Devices authorized for
such integration, and for no other use or purpose.
1.2. "Authorized Use for LSI Binary Code" means use of the LSI Binary Code
solely for the purpose of internal evaluation or developing, integrating,
testing and use of Licensee's Products to interface with LSI Devices and
for no other application, use or purpose.
1.3. "Authorized Use for LSI Internal Code" means use of the LSI Internal
Use Code solely for the purpose of internally developing, modifying,
integrating and testing Licensee's Products to interface with LSI Devices
authorized for such integration, and for no other use or purpose.
1.4. "Explanatory Materials" means explanatory and informational materials
or documentation concerning the LSI Licensed Code, in printed or electronic
format, including without limitation, manuals, descriptions, user and/or
installation instructions, diagrams, printouts, listings, flowcharts, and
training materials, contained on visual media such as paper or photographic
film, or on other physical storage media in machine-readable form.
Explanatory Materials do not include any code.
1.5. "LSI Licensed Code" means collectively all the software programs which
are owned or distributed by LSI and licensed to Licensee via the LSI
Download Center through acceptance of this Agreement. The LSI Licensed Code
is specifically referenced individually in this Agreement as LSI Source
Code, LSI Binary Code, or LSI Internal Use Code.
1.6. "Licensee's Products" means the hardware and software (and related
Licensee documentation) that will be developed or modified by or for
Licensee utilizing the LSI Licensed Code for the purpose of interfacing or
being used with LSI Devices.
1.7. "Updates" means maintenance releases, bug fixes, errata or other
corrections, and minor improvements or modifications to the LSI Licensed
Code which may be provided by LSI to Licensee from time to time at LSI's
sole discretion. LSI is under no obligation to provide Updates or provide
support and maintenance services to Licensee Subsequent Users.
1.8. "New Version" means significant changes, modifications, enhancements,
and/or functional improvements to the LSI Licensed Code. New Versions are
made and generally distributed solely at the discretion of LSI. Licensee
must use the latest New Version of LSI Licensed Code that is available. LSI
is under no obligation to port any development work from one version to the
latest New Version of LSI Licensed Code.
1.9. "LSI Devices" means those LSI products intended for use with the LSI
Licensed Code and purchased from LSI or its agents.
1.10. "Derivative Works" means: (a) for copyrightable or copyrighted
material, any translation (including translation into other computer
languages), port, modification, correction, addition, extension, upgrade,
improvement, compilation, abridgment or other form in which an existing
work may be recast, transformed or adapted; (b) for patentable or patented
material, any improvement thereon; and (c) for material which is protected
by trade secret, any new material derived from such existing trade secret
material, including new material which may be protected by copyright,
patent and/or trade secret.
1.11. "Intellectual Property Rights" means (by whatever name or term known
or designated) copyrights, trade secrets, patents, moral rights and any
other intellectual and industrial property and proprietary rights
(excluding trademarks) including registrations, applications, renewals and
extensions of such rights anywhere in the world.
1.12. "LSI Binary Code" means the software programs provided for
distribution at the LSI Download Center, in binary form, any other machine
readable materials, including, but not limited to, libraries, source files,
header files, and data files, any Updates and New Versions provided by LSI.
1.13. "LSI Source Code" means the software programs provided for
distribution at the LSI Download Center, in source form including, but not
limited to, libraries, source files, header files, and data files, and
Updates and New Versions provided by LSI.
1.14. "LSI Internal Use Code" means the software programs provided for
distribution at the LSI Download Center, in source code or object code
format including, but not limited to, libraries, source files, header
files, and data files, and Updates and New Versions provided by LSI that
are only for Licensee's internal use.
1.15. "JRE Code" mean Oracle Corporation's JAVA SE Runtime Environment Code.
1.16. "Subsequent User" means any user subsequent to Licensee, including
but not limited to, all Licensee customers, resellers, end users, and OEMs.
1.17 “Taxes" shall mean all taxes, levies, imposts, duties, fines or
other charges of whatsoever nature however imposed by any country or any
subdivision or authority thereof in any way connected with this Agreement
or any instrument or agreement required hereunder, and all interest,
penalties or similar liabilities with respect thereto, except such taxes as
are imposed on or measured by a party's net income or property.
2. Grant of Rights
.
2.1 LSI Binary Code. Subject to the terms of this Agreement, LSI grants to
Licensee a non-exclusive, world-wide, revocable (for breach in accordance
with Section 7), non-transferable limited license, without the right to
sublicense except as expressly provided herein, solely to:
.
(a) Use the LSI Binary Code and related Explanatory Materials solely for
the Authorized Use for Binary Code and only with LSI Devices
(b) Make copies of the LSI Binary Code and related Explanatory Materials to
support the Authorized Use for Binary Code and for archival and backup
purposes in support of the Authorized Use for Binary Code only with LSI
Devices;
(c) Distribute the LSI Binary Code as incorporated in Licensee's Products
or for use with LSI Devices to its Subsequent Users;
(d) Distribute the Explanatory Materials related to LSI Binary Code only
for use with LSI Devices;
(e) Sublicense the rights provided in paragraphs (a) and (b) above in
accordance with the terms provided in this Agreement to contract
manufacturers ("CMs") and/or original design manufacturers ("ODMs"), in
each case meeting the requirements of Section 3.1(d) below for the purpose
of manufacturing Licensee's Products; and (f) Sublicense the rights
provided in paragraphs (b) and (c) in accordance with the terms provided in
this Agreement to Subsequent Users who are not end users for the purpose of
distributing and supporting Licensee's Product.
2.2 LSI Source Code. Subject to the terms of this Agreement, LSI grants to
Licensee a non-exclusive, worldwide, revocable (for breach in accordance
with Section 7), non-transferable limited license, without the right to
sublicense except as expressly provided herein, solely to:
.
(a) Use the LSI Source Code and related Explanatory Materials solely for
the Authorized Use for Source Code and only with LSI Devices;
(b) Make copies of the LSI Source Code and related Explanatory Material to
support the Authorized Use for Source Code only and for archival and backup
purposes in support of the Authorized use for Source Code only with LSI
Devices;
(c) Modify and prepare Derivative Works of the LSI Source Code for the
Authorized Use for LSI Source Code and only for use with LSI Devices;
(d) Distribute the binary form only of any authorized Derivative Work of
the LSI Source Code ("Licensee Binary Derivative") and necessary portions
of the related Explanatory Materials only for use with LSI Devices; and
(e) Sublicense the rights granted in paragraph (d) above in accordance with
the terms provided in this Agreement to Subsequent Users who are not end
users for the purpose of distributing and supporting Licensee's Product.
2.3 LSI Internal Use Code. Subject to the terms of this Agreement, LSI
grants to Licensee a non-exclusive, worldwide, revocable (for breach in
accordance with Section 7), non-transferable limited license, without the
right to sublicense or distribute, solely to:
.
(a) Use the LSI Internal Use Code and related Explanatory Materials solely
for the Authorized Use for Internal Code and only with LSI Devices; and
(b) Make copies of the LSI Internal Use Code and related Explanatory
Materials to support the Authorized Use for Internal Code only and for
archival and backup purposes in support of the Authorized use for Internal
Code only with LSI Devices.
2.4 Without limiting Section 4, Licensee may exercise the foregoing rights
directly and/or indirectly through its employees and contractors, who are
bound by terms at least as restrictive as this Agreement.
.
3. License Restrictions
.
3.1. LSI Binary Code. The Licenses granted in Section 2.1 for LSI Binary
Code and related Explanatory Materials are subject to the following
restrictions:
.
(a) Licensee shall not use the LSI Binary Code and related Explanatory
Materials for any purpose other than as expressly provided in Article 2;
(b) Licensee shall reproduce all copyright notices and other proprietary
markings or legends contained within or on the LSI Binary Code and related
Explanatory Materials on any copies it makes; and
(c) Licensee shall not distribute or disclose the LSI Binary Code and
related Explanatory Materials except pursuant to an agreement with terms at
least as protective of LSI's Binary Code as the terms of this Agreement.
Licensee shall not, and shall not allow its Subsequent Users to,
disassemble, de-compile, or reverse engineer the LSI Binary Code.
(d) Licensee may grant the sublicense set forth in Section 2.1(e) to its
CMs and ODMs, provided that each such CM and ODM agrees to abide by the
terms and conditions of this Agreement and Licensee shall remain
responsible for any failure by its CMs and ODM to comply with the terms and
conditions of this Agreement.
3.2. LSI Source Code. The Licenses granted in Section 2.2 for LSI Source
Code and related Explanatory Materials are subject to the following
restrictions:
.
(a) Licensee shall not use the LSI Source Code and related Explanatory
Materials for any purpose other than as expressly provided in Article 2;
(b) Licensee shall reproduce all copyright notices and other proprietary
markings or legends contained within or on the LSI Source Code and related
Explanatory Materials on any copies it makes;
(c) Licensee shall not distribute or disclose any LSI Source Code and
related Explanatory Materials to any Subsequent Users or third parties,
without the express written consent of LSI;
(d) Licensee shall not knowingly infringe upon the intellectual property
rights of any third party when making Derivative Works to the LSI Source
Code;
(e) Licensee shall not disassemble, reverse-engineer, or decompile the LSI
Source Code, except for making authorized Derivative Works; and
(f) Licensee shall not distribute or disclose the Licensee Binary
Derivative except pursuant to an agreement with terms at least as
protective as those in this Agreement protecting LSI's Binary Code.
Licensee shall not, and shall not allow its Subsequent Users to,
disassemble, de-compile, or reverse engineer the Licensee Binary Derivative.
3.3. LSI Internal Use Code. The Licenses granted in Section 2.3 for LSI
Internal Use Code and related Explanatory Materials are subject to the
following restrictions:
.
(a) Licensee shall not use the LSI Internal Use Code and related
Explanatory Materials for any purpose other than as expressly provided in
Article 2;
(b) Licensee shall reproduce all copyright notices and other proprietary
markings or legends contained within or on the LSI Internal Use Code and
related Explanatory Materials on any copies it makes;
(c) Licensee shall not distribute or disclose any LSI Internal Use Code and
related Explanatory Materials to any Subsequent Users or third parties,
without the express written consent of LSI; and
(d) Licensee shall not disassemble, reverse-engineer, or decompile the LSI
Internal Use Code.
3.4. Derivative Works of LSI Source Code Made by Licensee. Subject to LSI's
rights in the underlying LSI Source Code, Licensee shall own all right,
title and interest in and to the Derivative Works (both binary and source
format) it makes from LSI Source Code, provided that such Derivative Works
are not made in breach of this Agreement. Licensee shall not be required to
disclose its Derivative Works of the LSI Source Code to LSI. LSI shall have
no obligations whatsoever to support, maintain, contribute to, or provide
Updates, New Versions or any modifications to Licensee Derivative Works of
the LSI Source Code and shall have no liability whatsoever for such
Derivative Works. In the event Licensee requests LSI's input regarding
Licensee Derivative Works of LSI Source Code and plans to disclose such
Derivative Works to LSI, a separate written agreement shall first be
executed by the parties.
.
3.5. LSI Derivative Works. Nothing contained herein shall prevent LSI from
creating any Derivative Works of its LSI Source Code at any time. Licensee
further agrees that LSI may independently create a Derivative Work similar
to or in competition with the Licensee Derivative Work of the LSI Source
Code and may use that Derivative Work for any purpose. Licensee grants LSI
a Covenant Not to Sue for any independently developed Derivative Works
created by LSI for its own LSI Source Code that Licensee may believe or
claim infringes on any of Licensee's Intellectual Property Rights relating
to the Licensee Derivative Works of the LSI Source Code.
.
3.6. U.S. Government Subsequent Users. All LSI Licensed Code and
Explanatory Materials qualify as "commercial items," as that term is
defined at 48 C.F.R. 2.101, consisting of "commercial computer software"
and "commercial computer software documentation" as such terms are used in
48 C.F.R. 12.212. Consistent with 48 CFR 52.227-19, 48 C.F.R.12.212 and 48
C.F.R. 227.7202-1 through 227.7202-4, Licensee will provide to U.S.
Government end users such LSI Binary Code with only those rights set forth
herein that apply to non-governmental end users. Use of such LSI Binary
Code constitutes agreement by the government entity that the computer
software and computer software documentation is commercial and constitutes
acceptance of the rights and restrictions herein.
.
3.7. No Implied Licenses. Except for the express and limited licenses
granted herein for specific purposes, no rights or licenses are granted by
LSI under this Agreement, by implication, inducement, estoppel or otherwise
with respect to any proprietary information or to any patents, copyrights,
trade secrets, trademarks, maskworks or other Intellectual Property Rights
owned or controlled by LSI. Any further licenses must be express, in
writing and signed by an authorized representative of LSI.
.
3.8. Injunctive Relief. In the event of a breach by Licensee of this
Section 2 or 3, LSI shall be entitled to applicable injunctive relief and
to all remedies available in equity and law to prevent Licensee from
disassembling, de-compiling, reverse engineering, disclosing or using the
LSI Licensed Code in whole or in part.
.
3.9. LSI Licensed Code Containing JRE. Certain LSI Licensed Code may
contain JRE. Use of the JRE is restricted by JRE licensing terms to General
Purpose Desktop Computers and Servers, as defined below. Licensee may seek
its own license for the JRE directly with the owner, if it deems necessary.
"General Purposes Desktop Computers and Servers" under JRE licensing terms
is defined as "computers, including desktop, laptop and tablet computers,
or servers, used for general computing functions under end user control
(such as but not specifically limited to email, general purpose Internet
browsing and office suite productivity tools)". The full terms and
conditions for use of the JRE are available at:
http://www.oracle.com/technetwork/java/javase/terms/license/index.html.
.
4. Confidentiality
.
4.1 Licensee agrees to limit access to the LSI Licensed Code and
Explanatory Materials to employees and contractors of Licensee (which may
include, without limitation, contractors retained by Licensee to maintain
or modify the LSI Licensed Code and Explanatory Materials on behalf of
Licensee) having a need to access or know the LSI Licensed Code and
Explanatory Materials and who have executed nondisclosure agreements with
Licensee obligating them to maintain the confidentiality of the LSI
Licensed Code and Explanatory Materials.
4.2 Licensee shall hold in confidence the LSI Licensed Code and Explanatory
Materials as LSI's confidential information ("Confidential Information")
and shall use the LSI Code and Explanatory Materials only as expressly
provided in Section 2, and protect the confidentiality of such Confidential
Information with the same degree of care as Licensee uses to protect its
own confidential or proprietary information of great commercial value, but
in no event less than reasonable care and for no less than three (3) years
from the date of disclosure.
4.3 Licensee agrees to notify LSI immediately after Licensee becomes aware
of any suspected misuse or unauthorized disclosure of any Confidential
Information. The obligations of confidentiality imposed on Licensee under
this Section 4 shall not apply or shall cease to apply to any of such
Confidential Information that Licensee clearly establishes: (i) was already
rightfully in the possession of Licensee at the time of disclosure as
evidenced by records of Licensee; (ii) is or becomes publicly available
through no act or omission of Licensee; (iii) is rightfully received by
Licensee from a third party without an obligation of confidentiality; (iv)
is independently developed by Licensee's employees or contractors without
use of or access to the information; or (v) is approved for unrestricted
disclosure in writing by an authorized representative of LSI. LSI makes no
warranty as to the accuracy of any Confidential Information, which is
furnished "AS IS" with all faults.
5. Ownership of Code by LSI, Fees, and Taxes
.
5.1 LSI reserves all right, title, ownership and interest in and to the LSI
Licensed Code and Explanatory Materials existing prior to and after the
Effective Date of this Agreement, or created or generated by LSI at any
time, subject to any licenses granted. LSI reserves all right, title,
ownership and interest in and to any Derivative Works it creates at any
time to the LSI Licensed Code and Explanatory Materials, subject to any
licenses granted.
5.2 Fees and Taxes. No fees are due in connection with this Agreement
unless separately specified by LSI. If any such fees are separately
specified in writing, the following applies:
5.2.1 Payment is due by Licensee upon download, at time of purchase, or no
later than within thirty (30) days of date of LSI invoice therefore, as
designated by LSI All payments shall be made in U.S. currency unless
otherwise agreed. If at any time, Licensee is delinquent in the payment of
any invoice, or is otherwise in breach of this Agreement, LSI may, at its
discretion, and without prejudice to its other rights, withhold delivery
(including partial delivery) of any order or may, at its option, require
Licensee to prepay for further deliveries. Any sum not paid by Licensee,
when due, shall bear interest until paid at a rate of 1.5% per month (18%
per annum) or the maximum rate permitted by law, whichever is less.
5.2.2 All payments or reimbursements due under this Agreement and any
instrument or agreement required hereunder shall be made free and clear and
without deduction for any and all present and future Taxes. Payments due to
LSI under this Agreement and any instrument or agreement required hereunder
shall be increased so that amounts received by LSI, after provisions for
Taxes and all Taxes on such increase, will be equal to the amounts required
under this Agreement and any instrument or agreement required hereunder if
no Taxes were due on such payments.
5.2.3 The Licensee shall indemnify LSI for the full amount of Taxes
attributable to the provision of products or services under this Agreement,
and any liabilities (including penalties, interest and expenses) arising
from such Taxes, within thirty (30) days from any written demand by LSI.
The Licensee shall provide evidence that all applicable Taxes have been
paid to the appropriate taxing authority by delivering to LSI receipts or
notarized copies thereof within thirty (30) days after the due date for
such tax payments.
5.2.4 Without prejudice to the survival of any other Agreement of Licensee
hereunder, the obligations of Licensee contained in this section shall
survive the payment in full of all payments hereunder.
6. Support
.
(a) LSI may provide the following support services for the LSI Licensed
Code to the extent LSI deems reasonable: Updates if and when released and
errata in LSI's sole discretion. LSI shall not be responsible for any other
support or maintenance of LSI Licensed Code to Licensee or its Subsequent
Users, unless otherwise agreed to in writing. LSI is under no obligation to
provide support services and may discontinue support services at any time.
LSI will not provide support for modified LSI Licensed Code or Licensee's
Derivative Works of the LSI Source Code.
(b) Any Updates to the LSI Licensed Code provided by LSI (which shall only
be provided by LSI in its sole discretion) shall be governed by the terms
of this Agreement.
(c) If Licensee finds what Licensee considers an error in the LSI Licensed
Code, Licensee will notify LSI so that LSI can, in its sole discretion,
make corrections to the LSI Licensed Code or to future revisions of the LSI
Licensed Code.
7. Term and Termination
.
7.1 Term. The term of this Agreement is five (5) years from the Effective
Date, subject to renewal upon mutual agreement of the parties.
7.2 Termination for Breach. If Licensee breaches any material provision of
this Agreement, LSI shall have the right to terminate this Agreement,
including all licenses granted hereunder, in addition to any and all other
remedies available at law or equity, unless Licensee cures such breach
within sixty (60) days ("Cure Period") after receiving written notice of
the breach by LSI. Licensee shall make best efforts to cure the material
breach in the least amount of time possible within the Cure Period.
7.3 Insolvency. If either party: (a) becomes substantially insolvent; (b)
makes an assignment for the benefit of creditors; (c) files or has filed
against it a petition in bankruptcy or seeking reorganization; (d) has a
receiver appointed; or (e) institutes any proceedings for liquidation or
winding up or have such proceedings instituted against it; then the other
party may, in addition to other rights and remedies it may have, terminate
this Agreement immediately by written notice.
7.4 Consequences. Upon termination or expiration of this Agreement for any
reason whatsoever, the licenses, rights, and covenants granted hereunder
and any obligations imposed hereunder shall cease except as otherwise
expressly set forth herein as surviving termination or expiration.
7.5 Return of Confidential Information. Upon expiration or termination of
this Agreement for any reason or upon written request by LSI, Licensee
agrees to promptly return to LSI or, at LSI's request, destroy and certify
by an officer of Licensee in writing the destruction of, all LSI
Confidential Information furnished to Licensee, including all LSI Licensed
Code and Explanatory Materials.
7.6 Survival of Licenses. Any LSI Licensed Code and Explanatory Materials
distributed prior to the effective date of any termination, expiration,
breach, or cancellation of this Agreement, shall remain licensed (including
any LSI Licensed Code in inventory, manufactured, or work in progress with
Licensee products) under the terms of this Agreement. Notwithstanding the
foregoing, Licensee may retain an archival copy of portions of the LSI
Confidential Information, including LSI Licensed Code and Explanatory
Materials, necessary for Licensee to provide ongoing technical support to
Subsequent Users using the LSI Licensed Code ("Archival Materials") after
termination, expiration or cancellation of this Agreement. Such Archival
Materials may not be used for any other purpose without the written consent
from LSI. Licensee shall keep such Archival Materials confidential for an
additional five (5) years from the date of termination, expiration , or
cancellation of this Agreement, regardless of when the LSI Confidential
Information was disclosed.
7.7 Survival. In the event of expiration or termination of this Agreement
for any reason, the following sections of this Agreement shall survive: 1,
3, 5, 7, 8, 9, 8 and 10. Termination will not prejudice either party to
require performance of any obligation due at the time of termination. All
end user licenses in effect and in compliance with the Agreement prior to
effective termination or expiration shall survive and continue in full
force and effect in accordance with their terms and Licensee may continue
to perform its obligations thereunder, including support obligations.
8. Disclaimer of All Warranties
.
8.1 THE PARTIES AGREE THAT LSI FURNISHES THE LSI LICENSED CODE AND
EXPLANATORY MATERIALS TO LICENSEE "AS IS," UNSUPPORTED, WITHOUT WARRANTY OF
ANY KIND. LSI DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT, INCLUDING ANY THAT MAY ARISE FROM A COURSE OF
PERFORMANCE, A COURSE OF DEALING OR TRADE USAGE. LSI SHALL NOT BE LIABLE
FOR ANY ERROR, OMISSION, DEFECT, DEFICIENCY, OR NONCONFORMITY IN THE LSI
LICENSED CODE OR EXPLANATORY MATERIALS. LSI MAKES NO WARRANTY OR
REPRESENTATION THAT THE LSI LICENSED CODE OR EXPLANATORY MATERIALS WILL
MEET LICENSEE'S REQUIREMENTS OR WILL WORK IN COMBINATION WITH ANY HARDWARE
OR SOFTWARE APPLICATION.
8.2 LSI DISCLAIMS ANY AND ALL LIABILITY IN CONNECTION WITH LICENSEE'S USE
OF THE LSI LICENSED CODE IN ANY MEDICAL, NUCLEAR, AVIATION, NAVIGATION,
MILITARY, OR OTHER HIGH RISK DEVICE OR APPLICATION. LICENSEE REPRESENTS AND
WARRANTS THAT IT WILL NOT USE THE LICENSED LSI CODE IN ANY MEDICAL,
NUCLEAR, AVIATION, NAVIGATION, MILITARY, OR OTHER HIGH RISK DEVICE OR
APPLICATION. LICENSEE SHALL INDEMNIFY, DEFEND, AND HOLD LSI HARMLESS
AGAINST ANY LOSS, LIABILITY, OR DAMAGE OF ANY KIND THAT LSI INCURS IN
CONNECTION WITH BREACH OF THE WARRANTY IN THIS SECTION 8.2.
8.3 LSI DISCLAIMS ANY AND ALL LIABILITY IN CONNECTION WITH LICENSEE'S
CREATION AND USE OF DERIVATIVE WORKS OF THE LSI SOURCE CODE. LICENSEE SHALL
INDEMNIFY, DEFEND, AND HOLD LSI HARMLESS AGAINST ANY LOSS, LIABILITY, OR
DAMAGE OF ANY KIND THAT LSI INCURS IN CONNECTION WITH LICENSEE'S DERIVATIVE
WORKS OF LSI SOURCE CODE.
9. Limitation of Liability
.
IN NO EVENT SHALL LSI, ITS EMPLOYEES, AFFILIATES ORSUPPLIERS BE LIABLE FOR
ANY LOST PROFITS, REVENUE, SALES OR DATA OR COSTS OF PROCURE OF SUBTITUTE
GOODS OR SERVICES, INTERRUPTION, LOSS OF BUSINESS INFORMATION OR ANY
SPECIAL, DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, ECONOMIC OR PUNITIVE
DAMAGES, HOWEVER CAUSED, AND WHETHER ARISING UNDER CONTRACT, TORT, STRICT
LIABILITY, NEGLIGENCE OR OTHER THEORY OF LIABILITY, ARISING OUT OF THE USE
OR INABILTY TO USE THE LSI LICENSED CODE OR EXPLANATORY MATERIALS, EVEN IF
LSI OR ITS EMPLOYEES, SUPPLIERS OR AFFILIATES ARE ADVISED OF THE
POSSIBILTIY OF SUCH DAMAGES. IN THE EVENT THAT THE APPLICABLE JURISDICTION
DOES NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY, BUT DOES ALLOW
LIABILTY TO BE LIMITED, THE LIABILITY OF LSI, ITS EMPLOYEES, AFFILIATES, OR
SUPPLIERS IN SUCH CASES, SHALL BE LIMITED TO $100 US DOLLARS.
10. General
.
10.1 Assignment. Licensee shall not assign this Agreement or any of its
rights or delegate any of its duties under this Agreement without the prior
written consent of LSI. Subject to the foregoing, this Agreement will be
binding upon, enforceable by, and inure to the benefit of the parties and
their respective successors and assigns. Any attempted assignment in
violation of this Section 10.1 shall be null and void.
10.2 Governing Law. This Agreement shall be construed and interpreted in
accordance with the law of the State of California without reference to its
conflicts of law principles.
10.3 Exclusive Jurisdiction. All disputes arising out of or related to this
Agreement will be subject to the exclusive jurisdiction and venue of the
California state courts of Santa Clara County, California in United States
District Court for the Northern District of California, and the parties
consent to the personal and exclusive jurisdiction of these courts.
10.4 Export Control. Licensee shall follow all export control laws and
regulations relating to the LSI Licensed Code and Explanatory Materials.
Licensee hereby acknowledges responsibility for compliance with all
applicable US and local laws and regulations related to import and export
and acknowledges and agrees that the LSI Licensed Code is subject to the
U.S. Export Administration Regulations. Diversion contrary to U.S. law is
prohibited. Licensee agrees that the LSI Licensed Code is being or will be
acquired for, shipped, transferred, or re-exported, directly or indirectly,
to prohibited or embargoed countries, nor be used for any prohibited
end-use, such as nuclear activities, chemical/biological weapons, or
missile projects, unless expressly authorized by the U.S. Government.
Prohibited countries are set forth in the Supplement 1 to Part 740 of the
U.S. Export Administration Regulations. Countries currently subject to U.S.
embargo include: Cuba, Iran, N. Korea, Sudan and Syria. This list is
subject to change without further notice from LSI Corporation and Licensee
understands that compliance with the list as it exists in fact, is
required. Licensee assumes sole responsibility for obtaining any/all
licenses required for export or re-export. All ECCN and CCATS numbers and
License Exception information are subject to change without notice.
Modification in any way nullifies the classification. It is therefore your
obligation as an exporter to verify such information and comply with the
then currently applicable regulations. Any data provided by LSI is for
informational purposes only. LSI Corporation makes no representation or
warranty as to the accuracy or reliability of any classifications or
numbers. Any use of such classifications or numbers by you is without
recourse to LSI Corporation and is at your own risk. LSI Corporation is in
no way responsible for any damages, whether direct, indirect,
consequential, incidental or otherwise, suffered by you as a result of
using or relying upon such classifications or numbers for any purpose
whatsoever. Licensee agrees to consult the EAR, the Bureau of Industry and
Security's Export Counseling Division, and other appropriate sources before
distributing, importing, or using LSI products. You may request software
classification information from LSI or view it at LSI.com. If requested,
Customer agrees to sign written assurances and other export-related
documents as may be required by LSI.
10.5 Waiver. No failure or delay on the part of either party in the
exercise of any right or privilege hereunder shall operate as a waiver
thereof or of the exercise of any other right or privilege hereunder, nor
shall any single or partial exercise of any such right or privilege
preclude other or further exercise thereof or of any other right or
privilege.
10.6 Notice. Any notice or claim provided for herein to LSI shall be in
writing and addressed as set forth below, and shall be given (i) by
personal delivery, effective upon delivery, (ii) by first class mail,
postage prepaid, addressed as set forth below, effective one (1) business
day after proper deposit in the mail, or (iii) by facsimile directed to the
facsimile number set forth below, but only if accompanied by mailing of a
copy in accordance with (ii) above, effective as of the date of facsimile
transmission.
Vice President
Global Commercial Law Group
LSI Corporation
1110 American Parkway, NE
Room 12K-302
Allentown, PA 18109
Fax: (610) 712-1450
10.7 Severability. If any term, condition, or provision of this Agreement,
or portion of this Agreement, is found to be invalid, unlawful or
unenforceable to any extent, the parties will endeavor in good faith to
agree to such amendments that will preserve, as far as possible, the
intentions expressed in this Agreement. Such invalid term, condition or
provision will be severed from the remaining terms, conditions and
provisions, which will continue to be valid and enforceable to the fullest
extent permitted by law.
10.8 Other Rights. Nothing contained in this Agreement shall be construed
as conferring by implication, estoppel, or otherwise upon either party or
any third party any license or other right except, solely as to the parties
hereto, the rights expressly granted hereunder.
10.9 Integration; Modification. This Agreement embodies the final, complete
and exclusive statement of the terms agreed upon by the parties with
respect to the subject matter hereof and supersedes any prior or
contemporaneous representations, descriptions, courses of dealing, or
agreements in regard to such subject matter. No amendment or modification
of this Agreement shall be valid or binding upon the parties unless stated
in writing and signed by an authorized representative of each party.
10.10 Publicity. All publicity concerning this transaction referring to the
other party shall require the other party's prior written approval which
shall not be unreasonably withheld.
10.11 Relationship of the Parties. The relationship of the parties hereto
is that of independent contractors. Neither party, nor its agents or
employees, shall be deemed to be the agent, employee, joint venture
partner, partner or fiduciary of the other party. Neither party shall have
the right to bind the other party, transact any business on behalf of or in
the name of the other party, or incur any liability for or on behalf of the
other party.
Files: debian/*
Copyright: Copyright (C) 2007-2012 Adam Cécile (Le_Vert)
License: GPL-2.0+
License: GPL-2.0+
This package is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
.
This package is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>
.
On Debian systems, the complete text of the GNU General
Public License version 2 can be found in "/usr/share/common-licenses/GPL-2".

2
debian/dirs vendored
View File

@ -1,2 +0,0 @@
usr/lib/megacli
usr/sbin

1
debian/docs vendored
View File

@ -1 +0,0 @@
debian/user_guide.pdf

View File

@ -1,3 +0,0 @@
#!/bin/sh
LD_LIBRARY_PATH="/usr/lib/megacli:$LD_LIBRARY_PATH" /usr/lib/megacli/megacli.real "$@"

48
debian/rules vendored
View File

@ -1,48 +0,0 @@
#!/usr/bin/make -f
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
DEB_BUILD_ARCH ?= $(shell dpkg-architecture -qDEB_BUILD_ARCH)
build: build-arch build-indep
build-arch:
build-indep:
clean:
dh_testdir
dh_testroot
dh_clean
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
install $(CURDIR)/debian/megacli.wrapper $(CURDIR)/debian/megacli/usr/sbin/megacli
ifeq ($(DEB_BUILD_ARCH),amd64)
install $(CURDIR)/amd64/opt/MegaRAID/MegaCli/MegaCli64 $(CURDIR)/debian/megacli/usr/lib/megacli/megacli.real
install $(CURDIR)/amd64/opt/MegaRAID/MegaCli/libstorelibir-2.so.14.07-0 $(CURDIR)/debian/megacli/usr/lib/megacli/libstorelibir-2.so.14.07-0
endif
ifeq ($(DEB_BUILD_ARCH),i386)
install $(CURDIR)/i386/opt/MegaRAID/MegaCli/MegaCli $(CURDIR)/debian/megacli/usr/lib/megacli/megacli.real
# Seem to be x64 only
#install $(CURDIR)/i386/opt/MegaRAID/MegaCli/libstorelibir-2.so.14.07-0 $(CURDIR)/debian/megacli/usr/lib/megacli/libstorelibir-2.so.14.07-0
endif
binary-indep:
binary-arch: build install
dh_testdir
dh_testroot
dh_installchangelogs 8.07.14_MegaCLI.txt
dh_installdocs
dh_compress
dh_fixperms
dh_installdeb
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
binary: binary-arch
.PHONY: build clean binary-indep binary-arch binary install

View File

@ -1 +0,0 @@
1.0

BIN
debian/user_guide.pdf vendored

Binary file not shown.

View File

@ -1,2 +0,0 @@
amd64!megacli!8.7.14.1!8-07-14_MegaCLI.zip!http://docs.avagotech.com/docs-and-downloads/raid-controllers/raid-controllers-common-files/8-07-14_MegaCLI.zip!bf53eeb0e8ccc09c34f52d7035940c62
i386!megacli!8.7.14.1!8-07-14_MegaCLI.zip!http://docs.avagotech.com/docs-and-downloads/raid-controllers/raid-controllers-common-files/8-07-14_MegaCLI.zip!bf53eeb0e8ccc09c34f52d7035940c62

Binary file not shown.

Binary file not shown.

View File

@ -0,0 +1 @@
4e7efbf8357f4d75e32eb62afe984109717942c5

Binary file not shown.

View File

@ -0,0 +1 @@
4e7efbf8357f4d75e32eb62afe984109717942c5