Merge tag 'upstream/3.10.3.0'

Upstream version 3.10.3.0
This commit is contained in:
Mario Fetka 2018-10-03 16:08:11 +02:00
commit 9338740231
5 changed files with 218 additions and 10 deletions

View File

@ -1,11 +1,11 @@
Smart Storage Administrator CLI (HPESSACLI)
Version 2.60-19.0
10/13/2016
Version 3.10-3.0
5/17/2017
Description
-----------
Smart Storage Administrator CLI is the command line-based disk configuration
program for Smart RAID/HBA controllers.
program for Smart Array controllers.
* All other product names mentioned herein may be trademarks of their
respective companies.
@ -17,16 +17,14 @@ Linux 32-bit components:
SuSE Linux Enterprise Server 11
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
Red Hat Enterprise Linux 7
Linux 64-bit components:
SuSE Linux Enterprise Server 10 (x86_64)
SuSE Linux Enterprise Server 11 (x86_64)
SuSE Linux Enterprise Server 12 (x86_64)
Red Hat Enterprise Linux 5 (x86_64)
Red Hat Enterprise Linux 6 (x86_64)
Red Hat Enterprise Linux 7 (x86_64)
Debian Sarge 64 bit
Debian Etch (amd64)
NOTE: For Red Hat Enterprise Linux 7.1 the sg driver must be manually
added so that it is loaded at boot time. Without the sg driver being
@ -105,7 +103,7 @@ Installing and running Smart Storage Administrator
When attempting to run SSACLI on any HPE-supported version of Linux, it is
highly recommended that you install the latest version of the HPE ProLiant
Smart RAID/HBA controller driver for your intended Linux operating system.
Smart Array controller driver for your intended Linux operating system.
Drivers may be obtained by clicking on "HPE Servers, Storage and Networking"
from HPE's support website at: http://support.hpe.com
@ -148,7 +146,7 @@ Additional Notes
happen. Note that there is also a limitation that only the first 16
volumes configured will be available to the operating system.
7. On RHEL5 systems, for this version of the SSACLI version 3.6.18-10 or
newer of the HPE ProLiant Smart RAID/HBA controller driver for Red Hat
newer of the HPE ProLiant Smart Array controller driver for Red Hat
Enterprise Linux 5 (x86, x86-64) is required. Drivers may be obtained by
clicking on "HPE Servers, Storage and Networking" from HPE's support
website at: http://support.hpe.com
@ -181,5 +179,5 @@ Notes for SSA Scripting
Support
-------
For support for SSACLI and Smart RAID/HBA controllers, please visit
http://support.hpe.com.
For support for SSACLI and Smart Array controllers, please visit
http://support.hpe.com

Binary file not shown.

View File

@ -0,0 +1,210 @@
<?xml version='1.0' encoding='UTF-8'?>
<manifest schema_version="2.0.0.0">
<meta lang="en">
<product id="0cb3f808e2514d3d934980176f9217f8">
<product_version>
<id product="0cb3f808e2514d3d934980176f9217f8" version="5530b3f5b38b4e0781e6bf9c74c7ded2" lucid_version="hpessacli.linux.x64@3.10-3.0__pubsw-linux_de,en,es,fr,it,ja"/>
<different>new</different>
<build number="16"/>
<type id="publishablesoftware-linux"/>
<name>
<name_xlate lang="en">HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit</name_xlate>
</name>
<alt_name>
<alt_name_xlate lang="en">HPE Smart Storage Administrator (HPE SSA) CLI for Linux 64-bit</alt_name_xlate>
</alt_name>
<version value="3.10-3.0" revision="" type_of_change="0"/>
<manufacturer_name>
<manufacturer_name_xlate lang="en">Hewlett Packard Enterprise</manufacturer_name_xlate>
</manufacturer_name>
<operating_systems>
<operating_system key="3359">
<operating_system_xlate>Red Hat Enterprise Linux 6 Server (x86-64)</operating_system_xlate>
</operating_system>
<operating_system key="4196">
<operating_system_xlate>Red Hat Enterprise Linux 7 Server</operating_system_xlate>
</operating_system>
<operating_system key="2951">
<operating_system_xlate>SUSE LINUX Enterprise Server 11 (AMD64/EM64T)</operating_system_xlate>
</operating_system>
<operating_system key="4199">
<operating_system_xlate>SUSE Linux Enterprise Server 12</operating_system_xlate>
</operating_system>
</operating_systems>
<products>
<product rom="A40"/>
<product rom="U37"/>
<product rom="U36"/>
<product rom="U35"/>
<product rom="U34"/>
<product rom="U33"/>
<product rom="U32"/>
<product rom="U31"/>
<product rom="U30"/>
<product rom="U13"/>
<product rom="U12"/>
<product rom="U15"/>
<product rom="U14"/>
<product rom="U17"/>
<product rom="U38"/>
<product rom="P99"/>
<product rom="P92"/>
<product rom="P95"/>
<product rom="U39"/>
<product rom="O42"/>
<product rom="I39"/>
<product rom="I38"/>
<product rom="I37"/>
<product rom="I36"/>
<product rom="U24"/>
<product rom="U25"/>
<product rom="U40"/>
<product rom="U41"/>
<product rom="U20"/>
<product rom="U21"/>
<product rom="U22"/>
<product rom="U23"/>
<product rom="Carbondale14"/>
<product rom="U19"/>
<product rom="P89"/>
<product rom="U18"/>
<product rom="P86"/>
<product rom="P85"/>
<product rom="U27"/>
<product rom="I42"/>
<product rom="I43"/>
<product rom="I40"/>
<product rom="I41"/>
</products>
<divisions>
<division key="68">
<division_xlate lang="en">ServerOptions</division_xlate>
</division>
<division key="9">
<division_xlate lang="en">Storage</division_xlate>
</division>
<division key="6">
<division_xlate lang="en">Server</division_xlate>
</division>
</divisions>
<category key="7800032">
<category_xlate lang="en">Software - System Management</category_xlate>
</category>
<languages langlist="fr,en,de,it,ja,es">
<languages_xlate lang="en">French,English (US),German,Italian,Japanese,Spanish</languages_xlate>
</languages>
<release_date year="2017" month="06" day="05" hour="00" minute="00" second="00"/>
<description>
<description_xlate lang="en"><![CDATA[The HPE Smart Storage Administrator CLI (HPE SSACLI) is a commandline-based disk configuration program that helps you configure, manage, diagnose, and monitor HPE ProLiant Smart Array Controllers and now other storage devices as well, such as host bus adapters (HBAs), HPE Storage controllers, and future devices such as SCSI Express drives, and SAS switch devices. HPE SSACLI replaces the existing HP Array Configuration CLI Utility, or ACUCLI, with an updated design and will deliver new features and functionality for various Smart Storage initiatives as they come online. HPE Smart Array Advanced Pack 1.0 and 2.0 features are now part of the baseline features of HPE SSACLI, with the appropriate firmware.
HPE SSACLI will allow you to configure and manage your storage as before, but now with additional features, abilities, and supported devices. Existing ACUCLI scripts should only need to make minimal changes such as calling the appropriate binary or executable in order to maintain compatibility.
HP SSASCRIPTING - Scripting can be performed in offline or online environments. The HP SSA Scripting application has 2 scripting modes Capture and Input.]]></description_xlate>
</description>
<prerequisite_notes/>
<installation_notes>
<installation_notes_xlate lang="en">
<installation_notes_xlate_part><![CDATA[<ul>
<li>HPE SSA&nbsp;CLI is distributed using Red Hat Package Manager (RPM) packages.</li>
</ul>
<ul>
<li>If there is an older version of&nbsp;HPE SSA&nbsp;CLI installed on the system (Before version 2.60.18.0), please use &quot;rpm -e hpssacli&quot; to remove it first.</li>
<li>If there is an older version of&nbsp;HPE SSA&nbsp;CLI installed on the system (2.60.18.0 and later), please use &quot;rpm -e ssacli&quot; to remove it first.</li>
</ul>
<ul>
<li>Use &quot;rpm -i &quot; to install the application.</li>
</ul>
]]></installation_notes_xlate_part>
</installation_notes_xlate>
</installation_notes>
<availability_notes/>
<documentation_notes/>
<upgrade_requirement value="Optional"/>
<prerequisites>
<supported_operating_systems>
<supported_operating_system platform="suse_linux_enterprise_server_x86_64" major="12" minor="0" sr="OEM" name="SUSE Linux Enterprise Server 12"/>
<supported_operating_system platform="red_hat_enterprise_linux_x86_64" major="6" minor="0" sr="OEM" name="Red Hat Enterprise Linux 6 Server (x86-64)"/>
<supported_operating_system platform="suse_linux_enterprise_server_x86_64" major="11" minor="0" sr="OEM" name="SUSE LINUX Enterprise Server 11 (AMD64/EM64T)"/>
<supported_operating_system platform="red_hat_enterprise_linux_x86_64" major="7" minor="0" sr="OEM" name="Red Hat Enterprise Linux 7 Server"/>
</supported_operating_systems>
<supported_devices/>
<required_diskspace/>
</prerequisites>
<installation>
<install>
<install_caps/>
<command/>
<command_params/>
<reboot_required value="no"/>
<reboot_details value="No">
<reboot_details_xlate lang="en">Reboot is not required after installation for updates to take effect and hardware stability to be maintained</reboot_details_xlate>
</reboot_details>
<per_device_install_time_seconds>0</per_device_install_time_seconds>
</install>
<uninstall>
<uninstall_caps/>
<command/>
<command_params/>
<reboot_required/>
</uninstall>
</installation>
<sw_keys>
<sw_keys_and>
<sw_key name="ssacli" guid="20a6e8e4-bf33-4c71-a6bf-d9ecff0816bd">
<sw_key_expectedpath>software:rpm</sw_key_expectedpath>
</sw_key>
</sw_keys_and>
</sw_keys>
<filename>ssacli-3.10-3.0.x86_64.rpm</filename>
<component_config/>
<files>
<file size="13MB" bytes="14199438" date_modified="2017-05-19T08:36:20" md5sum="" sha1sum="" version="3.10" release="3.0">
<name>ssacli-3.10-3.0.x86_64.rpm</name>
<url id="http://ftp.hp.com"/>
<url id="file://.">file://./packages/ssacli-3.10-3.0.x86_64.rpm</url>
<file_list>
<file>./opt/smartstorageadmin/ssacli</file>
<file>./opt/smartstorageadmin/ssacli/bin</file>
<file>./opt/smartstorageadmin/ssacli/bin/mklocks.sh</file>
<file>./opt/smartstorageadmin/ssacli/bin/rmstr</file>
<file>./opt/smartstorageadmin/ssacli/bin/ssacli</file>
<file>./opt/smartstorageadmin/ssacli/bin/ssacli-3.10-3.0.x86_64.txt</file>
<file>./opt/smartstorageadmin/ssacli/bin/ssacli.license</file>
<file>./opt/smartstorageadmin/ssacli/bin/ssascripting</file>
<file>./usr/man/man8/ssacli.8.gz</file>
<file>./usr/sbin/ssacli</file>
<file>./usr/sbin/ssascripting</file>
</file_list>
</file>
</files>
<file_details/>
<revision_history>
<revision>
<version value="3.10-3.0" revision="" type_of_change="0"/>
<revision_enhancements_xlate lang="en">
<revision_enhancements_xlate_part><![CDATA[<ul style="list-style-type:square">
<li>Initial firmware release for HPE P/E-Class SR Gen10 controllers.</li>
</ul>
]]></revision_enhancements_xlate_part>
</revision_enhancements_xlate>
<revision_fixes_xlate lang="en">
<revision_fixes_xlate_part/>
</revision_fixes_xlate>
</revision>
<revision>
<version value="2.65-7.0" type_of_change="0"/>
<revision_enhancements_xlate lang="en">
<revision_enhancements_xlate_part/>
</revision_enhancements_xlate>
<revision_fixes_xlate lang="en">
<revision_fixes_xlate_part><![CDATA[<p>SSA incorrectly displays 64 characters&nbsp;for the encryption master key length in local mode. The length was changed to 32 characters.</p>
]]></revision_fixes_xlate_part>
</revision_fixes_xlate>
</revision>
</revision_history>
</product_version>
</product>
</meta>
</manifest>